# SPDX-License-Identifier: Apache-2.0

CONFIG_ARM=y
CONFIG_BOARD_OLIMEX_STM32_E407=y
CONFIG_SOC_SERIES_STM32F4X=y
CONFIG_SOC_STM32F407XG=y
# 168MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=168000000
CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000

# Enable MPU
CONFIG_ARM_MPU=y

CONFIG_SERIAL=y

# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# enable pinmux
CONFIG_PINMUX=y

# enable GPIO
CONFIG_GPIO=y

# clock configuration
CONFIG_CLOCK_CONTROL=y

# Clock configuration for Cube Clock control driver
CONFIG_CLOCK_STM32_HSE_CLOCK=12000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# use HSE as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
# produce 168MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=6
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=168
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=7
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=4
CONFIG_CLOCK_STM32_APB2_PRESCALER=2

CONFIG_ENTROPY_GENERATOR=y
# CONFIG_ENTROPY_HAS_DRIVER is not set
CONFIG_ENTROPY_NAME="ENTROPY_0"
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_TIMER_RANDOM_GENERATOR=y