| /* |
| * Copyright (c) 2021 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * @brief Driver to utilize TLB on Intel Audio DSP |
| * |
| * TLB (Translation Lookup Buffer) table is used to map between |
| * physical and virtual memory. This is global to all cores |
| * on the DSP, as changes to the TLB table are visible to |
| * all cores. |
| * |
| * Note that all passed in addresses should be in cached range |
| * (aka cached addresses). Due to the need to calculate TLB |
| * indexes, virtual addresses will be converted internally to |
| * cached one via sys_cache_cached_ptr_get(). However, physical addresses |
| * are untouched. |
| */ |
| |
| #include "mm_drv_intel_adsp.h" |
| #include <soc_util.h> |
| #include <zephyr/drivers/mm/mm_drv_intel_adsp_mtl_tlb.h> |
| #include <zephyr/drivers/mm/mm_drv_bank.h> |
| #include <zephyr/debug/sparse.h> |
| #include <zephyr/cache.h> |
| #include <kernel_arch_interface.h> |
| |
| #define SRAM_BANK_PAGE_NUM (SRAM_BANK_SIZE / CONFIG_MM_DRV_PAGE_SIZE) |
| |
| static struct k_spinlock tlb_lock; |
| extern struct k_spinlock sys_mm_drv_common_lock; |
| |
| static struct sys_mm_drv_bank hpsram_bank[L2_SRAM_BANK_NUM]; |
| |
| #ifdef CONFIG_SOC_INTEL_COMM_WIDGET |
| #include <adsp_comm_widget.h> |
| |
| static uint32_t used_pages; |
| /* PMC uses 32 KB banks */ |
| static uint32_t used_pmc_banks_reported; |
| #endif |
| |
| |
| /* Define a marker which is placed by the linker script just after |
| * last explicitly defined section. All .text, .data, .bss and .heap |
| * sections should be placed before this marker in the memory. |
| * This driver is using the location of the marker to |
| * unmap the unused L2 memory and power off corresponding memory banks. |
| */ |
| __attribute__((__section__(".unused_ram_start_marker"))) |
| static int unused_l2_sram_start_marker = 0xba0babce; |
| #define UNUSED_L2_START_ALIGNED ROUND_UP(POINTER_TO_UINT(&unused_l2_sram_start_marker), \ |
| CONFIG_MM_DRV_PAGE_SIZE) |
| |
| /* declare L2 physical memory block */ |
| SYS_MEM_BLOCKS_DEFINE_WITH_EXT_BUF( |
| L2_PHYS_SRAM_REGION, |
| CONFIG_MM_DRV_PAGE_SIZE, |
| L2_SRAM_PAGES_NUM, |
| (uint8_t *) L2_SRAM_BASE); |
| |
| /** |
| * Calculate the index to the TLB table. |
| * |
| * @param vaddr Page-aligned virutal address. |
| * @return Index to the TLB table. |
| */ |
| static uint32_t get_tlb_entry_idx(uintptr_t vaddr) |
| { |
| return (POINTER_TO_UINT(vaddr) - CONFIG_KERNEL_VM_BASE) / |
| CONFIG_MM_DRV_PAGE_SIZE; |
| } |
| |
| /** |
| * Calculate the index of the HPSRAM bank. |
| * |
| * @param pa physical address. |
| * @return Index of the HPSRAM bank. |
| */ |
| static uint32_t get_hpsram_bank_idx(uintptr_t pa) |
| { |
| uint32_t phys_offset = pa - L2_SRAM_BASE; |
| |
| return (phys_offset / SRAM_BANK_SIZE); |
| } |
| |
| /** |
| * Convert the SYS_MM_MEM_PERM_* flags into TLB entry permission bits. |
| * |
| * @param flags Access flags (SYS_MM_MEM_PERM_*) |
| * @return TLB entry permission bits |
| */ |
| static uint16_t flags_to_tlb_perms(uint32_t flags) |
| { |
| #if defined(CONFIG_SOC_SERIES_INTEL_ADSP_ACE) |
| uint16_t perms = 0; |
| |
| if ((flags & SYS_MM_MEM_PERM_RW) == SYS_MM_MEM_PERM_RW) { |
| perms |= TLB_WRITE_BIT; |
| } |
| |
| if ((flags & SYS_MM_MEM_PERM_EXEC) == SYS_MM_MEM_PERM_EXEC) { |
| perms |= TLB_EXEC_BIT; |
| } |
| |
| return perms; |
| #else |
| return 0; |
| #endif |
| } |
| |
| #if defined(CONFIG_SOC_SERIES_INTEL_ADSP_ACE) |
| /** |
| * Convert TLB entry permission bits to the SYS_MM_MEM_PERM_* flags. |
| * |
| * @param perms TLB entry permission bits |
| * @return Access flags (SYS_MM_MEM_PERM_*) |
| */ |
| static uint16_t tlb_perms_to_flags(uint16_t perms) |
| { |
| uint32_t flags = 0; |
| |
| if ((perms & TLB_WRITE_BIT) == TLB_WRITE_BIT) { |
| flags |= SYS_MM_MEM_PERM_RW; |
| } |
| |
| if ((perms & TLB_EXEC_BIT) == TLB_EXEC_BIT) { |
| flags |= SYS_MM_MEM_PERM_EXEC; |
| } |
| |
| return flags; |
| } |
| #endif |
| |
| static int sys_mm_drv_hpsram_pwr(uint32_t bank_idx, bool enable, bool non_blocking) |
| { |
| #if defined(CONFIG_SOC_SERIES_INTEL_ADSP_ACE) |
| if (bank_idx > ace_hpsram_get_bank_count()) { |
| return -1; |
| } |
| |
| HPSRAM_REGS(bank_idx)->HSxPGCTL = !enable; |
| |
| if (!non_blocking) { |
| while (HPSRAM_REGS(bank_idx)->HSxPGISTS == enable) { |
| k_busy_wait(1); |
| } |
| } |
| #endif |
| return 0; |
| } |
| |
| #ifdef CONFIG_SOC_INTEL_COMM_WIDGET |
| static void sys_mm_drv_report_page_usage(void) |
| { |
| /* PMC uses 32 KB banks */ |
| uint32_t pmc_banks = DIV_ROUND_UP(used_pages, KB(32) / CONFIG_MM_DRV_PAGE_SIZE); |
| |
| if (used_pmc_banks_reported != pmc_banks) { |
| if (!adsp_comm_widget_pmc_send_ipc(pmc_banks)) { |
| /* Store reported value if message was sent successfully. */ |
| used_pmc_banks_reported = pmc_banks; |
| } |
| } |
| } |
| #endif |
| |
| int sys_mm_drv_map_page(void *virt, uintptr_t phys, uint32_t flags) |
| { |
| k_spinlock_key_t key; |
| uint32_t entry_idx, bank_idx; |
| uint16_t entry; |
| volatile uint16_t *tlb_entries = UINT_TO_POINTER(TLB_BASE); |
| int ret = 0; |
| void *phys_block_ptr; |
| |
| /* |
| * Cached addresses for both physical and virtual. |
| * |
| * As the main memory is in cached address ranges, |
| * the cached physical address is needed to perform |
| * bound check. |
| */ |
| uintptr_t pa = POINTER_TO_UINT(sys_cache_cached_ptr_get(UINT_TO_POINTER(phys))); |
| uintptr_t va = POINTER_TO_UINT(sys_cache_cached_ptr_get(virt)); |
| |
| ARG_UNUSED(flags); |
| |
| /* Make sure VA is page-aligned */ |
| CHECKIF(!sys_mm_drv_is_addr_aligned(va)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Check bounds of virtual address space */ |
| CHECKIF((va < UNUSED_L2_START_ALIGNED) || |
| (va >= (CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_SIZE))) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * When the provided physical address is NULL |
| * then it is a signal to the Intel ADSP TLB driver to |
| * select the first available free physical address |
| * autonomously within the driver. |
| */ |
| if (UINT_TO_POINTER(phys) == NULL) { |
| ret = sys_mem_blocks_alloc_contiguous(&L2_PHYS_SRAM_REGION, 1, |
| &phys_block_ptr); |
| if (ret != 0) { |
| __ASSERT(false, |
| "unable to assign free phys page %d\n", ret); |
| goto out; |
| } |
| pa = POINTER_TO_UINT(sys_cache_cached_ptr_get(phys_block_ptr)); |
| } |
| |
| /* Check bounds of physical address space */ |
| CHECKIF((pa < L2_SRAM_BASE) || |
| (pa >= (L2_SRAM_BASE + L2_SRAM_SIZE))) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Make sure PA is page-aligned */ |
| CHECKIF(!sys_mm_drv_is_addr_aligned(pa)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| key = k_spin_lock(&tlb_lock); |
| |
| entry_idx = get_tlb_entry_idx(va); |
| |
| #ifdef CONFIG_SOC_INTEL_COMM_WIDGET |
| used_pages++; |
| sys_mm_drv_report_page_usage(); |
| #endif |
| |
| bank_idx = get_hpsram_bank_idx(pa); |
| if (sys_mm_drv_bank_page_mapped(&hpsram_bank[bank_idx]) == 1) { |
| sys_mm_drv_hpsram_pwr(bank_idx, true, false); |
| } |
| |
| /* |
| * The address part of the TLB entry takes the lowest |
| * TLB_PADDR_SIZE bits of the physical page number, |
| * and discards the highest bits. This is due to the |
| * architecture design where the same physical page |
| * can be accessed via two addresses. One address goes |
| * through the cache, and the other one accesses |
| * memory directly (without cache). The difference |
| * between these two addresses are in the higher bits, |
| * and the lower bits are the same. And this is why |
| * TLB only cares about the lower part of the physical |
| * address. |
| */ |
| entry = pa_to_tlb_entry(pa); |
| |
| /* Enable the translation in the TLB entry */ |
| entry |= TLB_ENABLE_BIT; |
| |
| /* Set permissions for this entry */ |
| entry |= flags_to_tlb_perms(flags); |
| |
| tlb_entries[entry_idx] = entry; |
| |
| #ifdef CONFIG_MMU |
| arch_mem_map(virt, va, CONFIG_MM_DRV_PAGE_SIZE, flags); |
| #endif |
| /* |
| * Invalid the cache of the newly mapped virtual page to |
| * avoid stale data. |
| */ |
| sys_cache_data_invd_range(virt, CONFIG_MM_DRV_PAGE_SIZE); |
| |
| k_spin_unlock(&tlb_lock, key); |
| |
| out: |
| return ret; |
| } |
| |
| int sys_mm_drv_map_region(void *virt, uintptr_t phys, |
| size_t size, uint32_t flags) |
| { |
| k_spinlock_key_t key; |
| int ret = 0; |
| size_t offset; |
| uintptr_t pa; |
| uint8_t *va; |
| |
| CHECKIF(!sys_mm_drv_is_addr_aligned(phys) || |
| !sys_mm_drv_is_virt_addr_aligned(virt) || |
| !sys_mm_drv_is_size_aligned(size)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| va = (__sparse_force uint8_t *)sys_cache_cached_ptr_get(virt); |
| pa = phys; |
| |
| key = k_spin_lock(&sys_mm_drv_common_lock); |
| |
| for (offset = 0; offset < size; offset += CONFIG_MM_DRV_PAGE_SIZE) { |
| int ret2 = sys_mm_drv_map_page(va, pa, flags); |
| |
| if (ret2 != 0) { |
| __ASSERT(false, "cannot map 0x%lx to %p\n", pa, va); |
| |
| ret = ret2; |
| } |
| va += CONFIG_MM_DRV_PAGE_SIZE; |
| if (phys != 0) { |
| pa += CONFIG_MM_DRV_PAGE_SIZE; |
| } |
| } |
| |
| k_spin_unlock(&sys_mm_drv_common_lock, key); |
| |
| out: |
| return ret; |
| } |
| |
| int sys_mm_drv_map_array(void *virt, uintptr_t *phys, |
| size_t cnt, uint32_t flags) |
| { |
| void *va = (__sparse_force void *)sys_cache_cached_ptr_get(virt); |
| |
| return sys_mm_drv_simple_map_array(va, phys, cnt, flags); |
| } |
| |
| static int sys_mm_drv_unmap_page_wflush(void *virt, bool flush_data) |
| { |
| k_spinlock_key_t key; |
| uint32_t entry_idx, bank_idx; |
| uint16_t *tlb_entries = UINT_TO_POINTER(TLB_BASE); |
| uintptr_t pa; |
| int ret = 0; |
| |
| /* Use cached virtual address */ |
| uintptr_t va = POINTER_TO_UINT(sys_cache_cached_ptr_get(virt)); |
| |
| /* Check bounds of virtual address space */ |
| CHECKIF((va < UNUSED_L2_START_ALIGNED) || |
| (va >= (CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_SIZE))) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Make sure inputs are page-aligned */ |
| CHECKIF(!sys_mm_drv_is_addr_aligned(va)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| key = k_spin_lock(&tlb_lock); |
| |
| /* |
| * Flush the cache to make sure the backing physical page |
| * has the latest data. |
| * No flush when called from sys_mm_drv_mm_init(). |
| */ |
| if (flush_data) { |
| sys_cache_data_flush_range(virt, CONFIG_MM_DRV_PAGE_SIZE); |
| #ifdef CONFIG_MMU |
| arch_mem_unmap(virt, CONFIG_MM_DRV_PAGE_SIZE); |
| #endif |
| } |
| |
| entry_idx = get_tlb_entry_idx(va); |
| pa = tlb_entry_to_pa(tlb_entries[entry_idx]); |
| |
| /* Restore default entry settings with cleared the enable bit. */ |
| tlb_entries[entry_idx] = 0; |
| |
| /* Check bounds of physical address space. |
| * Initial TLB mappings could point to non existing physical pages. |
| */ |
| if ((pa >= L2_SRAM_BASE) && (pa < (L2_SRAM_BASE + L2_SRAM_SIZE))) { |
| sys_mem_blocks_free_contiguous(&L2_PHYS_SRAM_REGION, |
| UINT_TO_POINTER(pa), 1); |
| |
| bank_idx = get_hpsram_bank_idx(pa); |
| #ifdef CONFIG_SOC_INTEL_COMM_WIDGET |
| used_pages--; |
| sys_mm_drv_report_page_usage(); |
| #endif |
| |
| if (sys_mm_drv_bank_page_unmapped(&hpsram_bank[bank_idx]) == SRAM_BANK_PAGE_NUM) { |
| sys_mm_drv_hpsram_pwr(bank_idx, false, false); |
| } |
| } |
| |
| k_spin_unlock(&tlb_lock, key); |
| |
| out: |
| return ret; |
| } |
| |
| int sys_mm_drv_unmap_page(void *virt) |
| { |
| return sys_mm_drv_unmap_page_wflush(virt, true); |
| } |
| |
| int sys_mm_drv_unmap_region(void *virt, size_t size) |
| { |
| void *va = (__sparse_force void *)sys_cache_cached_ptr_get(virt); |
| |
| return sys_mm_drv_simple_unmap_region(va, size); |
| } |
| |
| int sys_mm_drv_update_page_flags(void *virt, uint32_t flags) |
| { |
| k_spinlock_key_t key; |
| uint32_t entry_idx; |
| uint16_t entry; |
| uint16_t *tlb_entries = UINT_TO_POINTER(TLB_BASE); |
| int ret = 0; |
| |
| /* Use cached virtual address */ |
| uintptr_t va = POINTER_TO_UINT(sys_cache_cached_ptr_get(virt)); |
| |
| /* Make sure inputs are page-aligned and check bounds of virtual address space */ |
| CHECKIF(!sys_mm_drv_is_addr_aligned(va) || |
| (va < UNUSED_L2_START_ALIGNED) || |
| (va >= (CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_SIZE))) { |
| return -EINVAL; |
| } |
| |
| key = k_spin_lock(&tlb_lock); |
| |
| entry_idx = get_tlb_entry_idx(va); |
| |
| entry = tlb_entries[entry_idx]; |
| |
| /* Check entry is already mapped */ |
| if (!(entry & TLB_ENABLE_BIT)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| /* Clear the access flags */ |
| entry &= ~(TLB_EXEC_BIT | TLB_WRITE_BIT); |
| |
| /* Set new permissions for this entry */ |
| entry |= flags_to_tlb_perms(flags); |
| |
| tlb_entries[entry_idx] = entry; |
| |
| out: |
| k_spin_unlock(&tlb_lock, key); |
| return ret; |
| } |
| |
| #ifdef CONFIG_MM_DRV_INTEL_ADSP_TLB_REMAP_UNUSED_RAM |
| static int sys_mm_drv_unmap_region_initial(void *virt_in, size_t size) |
| { |
| void *virt = (__sparse_force void *)sys_cache_cached_ptr_get(virt_in); |
| |
| k_spinlock_key_t key; |
| int ret = 0; |
| size_t offset; |
| |
| CHECKIF(!sys_mm_drv_is_virt_addr_aligned(virt) || |
| !sys_mm_drv_is_size_aligned(size)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| key = k_spin_lock(&sys_mm_drv_common_lock); |
| |
| for (offset = 0; offset < size; offset += CONFIG_MM_DRV_PAGE_SIZE) { |
| uint8_t *va = (uint8_t *)virt + offset; |
| |
| int ret2 = sys_mm_drv_unmap_page_wflush(va, false); |
| |
| if (ret2 != 0) { |
| __ASSERT(false, "cannot unmap %p\n", va); |
| |
| ret = ret2; |
| } |
| } |
| |
| k_spin_unlock(&sys_mm_drv_common_lock, key); |
| |
| out: |
| return ret; |
| } |
| #endif |
| |
| int sys_mm_drv_page_phys_get(void *virt, uintptr_t *phys) |
| { |
| uint16_t *tlb_entries = UINT_TO_POINTER(TLB_BASE); |
| uintptr_t ent; |
| int ret = 0; |
| |
| /* Use cached address */ |
| uintptr_t va = POINTER_TO_UINT(sys_cache_cached_ptr_get(virt)); |
| |
| CHECKIF(!sys_mm_drv_is_addr_aligned(va)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Check bounds of virtual address space */ |
| CHECKIF((va < CONFIG_KERNEL_VM_BASE) || |
| (va >= (CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_SIZE))) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ent = tlb_entries[get_tlb_entry_idx(va)]; |
| |
| if ((ent & TLB_ENABLE_BIT) != TLB_ENABLE_BIT) { |
| ret = -EFAULT; |
| } else { |
| if (phys != NULL) { |
| *phys = (ent & TLB_PADDR_MASK) * |
| CONFIG_MM_DRV_PAGE_SIZE + TLB_PHYS_BASE; |
| } |
| |
| ret = 0; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| int sys_mm_drv_page_flag_get(void *virt, uint32_t *flags) |
| { |
| ARG_UNUSED(virt); |
| int ret = 0; |
| |
| #if defined(CONFIG_SOC_SERIES_INTEL_ADSP_ACE) |
| uint16_t *tlb_entries = UINT_TO_POINTER(TLB_BASE); |
| uint16_t ent; |
| |
| /* Use cached address */ |
| uintptr_t va = POINTER_TO_UINT(sys_cache_cached_ptr_get(virt)); |
| |
| CHECKIF(!sys_mm_drv_is_addr_aligned(va)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Check bounds of virtual address space */ |
| CHECKIF((va < CONFIG_KERNEL_VM_BASE) || |
| (va >= (CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_SIZE))) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ent = tlb_entries[get_tlb_entry_idx(va)]; |
| |
| if ((ent & TLB_ENABLE_BIT) != TLB_ENABLE_BIT) { |
| ret = -EFAULT; |
| } else { |
| *flags = tlb_perms_to_flags(ent); |
| } |
| |
| out: |
| #else |
| /* |
| * There are no caching mode, or R/W, or eXecution (etc.) bits. |
| * So just return 0. |
| */ |
| |
| *flags = 0U; |
| #endif |
| |
| return ret; |
| } |
| |
| int sys_mm_drv_remap_region(void *virt_old, size_t size, |
| void *virt_new) |
| { |
| void *va_new = (__sparse_force void *)sys_cache_cached_ptr_get(virt_new); |
| void *va_old = (__sparse_force void *)sys_cache_cached_ptr_get(virt_old); |
| |
| return sys_mm_drv_simple_remap_region(va_old, size, va_new); |
| } |
| |
| int sys_mm_drv_move_region(void *virt_old, size_t size, void *virt_new, |
| uintptr_t phys_new) |
| { |
| k_spinlock_key_t key; |
| size_t offset; |
| int ret = 0; |
| |
| virt_new = (__sparse_force void *)sys_cache_cached_ptr_get(virt_new); |
| virt_old = (__sparse_force void *)sys_cache_cached_ptr_get(virt_old); |
| |
| CHECKIF(!sys_mm_drv_is_virt_addr_aligned(virt_old) || |
| !sys_mm_drv_is_virt_addr_aligned(virt_new) || |
| !sys_mm_drv_is_size_aligned(size)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if ((POINTER_TO_UINT(virt_new) >= POINTER_TO_UINT(virt_old)) && |
| (POINTER_TO_UINT(virt_new) < (POINTER_TO_UINT(virt_old) + size))) { |
| ret = -EINVAL; /* overlaps */ |
| goto out; |
| } |
| |
| /* |
| * The function's behavior has been updated to accept |
| * phys_new == NULL and get the physical addresses from |
| * the actual TLB instead of from the caller. |
| */ |
| if (phys_new != POINTER_TO_UINT(NULL) && |
| !sys_mm_drv_is_addr_aligned(phys_new)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| key = k_spin_lock(&sys_mm_drv_common_lock); |
| |
| if (!sys_mm_drv_is_virt_region_mapped(virt_old, size) || |
| !sys_mm_drv_is_virt_region_unmapped(virt_new, size)) { |
| ret = -EINVAL; |
| goto unlock_out; |
| } |
| |
| for (offset = 0; offset < size; offset += CONFIG_MM_DRV_PAGE_SIZE) { |
| uint8_t *va_old = (uint8_t *)virt_old + offset; |
| uint8_t *va_new = (uint8_t *)virt_new + offset; |
| uintptr_t pa; |
| uint32_t flags; |
| int ret2; |
| |
| ret2 = sys_mm_drv_page_flag_get(va_old, &flags); |
| if (ret2 != 0) { |
| __ASSERT(false, "cannot query page flags %p\n", va_old); |
| |
| ret = ret2; |
| goto unlock_out; |
| } |
| |
| ret2 = sys_mm_drv_page_phys_get(va_old, &pa); |
| if (ret2 != 0) { |
| __ASSERT(false, "cannot query page paddr %p\n", va_old); |
| |
| ret = ret2; |
| goto unlock_out; |
| } |
| |
| /* |
| * Only map the new page when we can retrieve |
| * flags and phys addr of the old mapped page as We don't |
| * want to map with unknown random flags. |
| */ |
| ret2 = sys_mm_drv_map_page(va_new, pa, flags); |
| if (ret2 != 0) { |
| __ASSERT(false, "cannot map 0x%lx to %p\n", pa, va_new); |
| |
| ret = ret2; |
| } |
| |
| ret2 = sys_mm_drv_unmap_page(va_old); |
| if (ret2 != 0) { |
| __ASSERT(false, "cannot unmap %p\n", va_old); |
| |
| ret = ret2; |
| } |
| } |
| |
| unlock_out: |
| k_spin_unlock(&sys_mm_drv_common_lock, key); |
| |
| out: |
| /* |
| * Since move is done in virtual space, need to |
| * flush the cache to make sure the backing physical |
| * pages have the new data. |
| */ |
| sys_cache_data_flush_range(virt_new, size); |
| sys_cache_data_flush_and_invd_range(virt_old, size); |
| |
| return ret; |
| } |
| |
| int sys_mm_drv_move_array(void *virt_old, size_t size, void *virt_new, |
| uintptr_t *phys_new, size_t phys_cnt) |
| { |
| int ret; |
| |
| void *va_new = (__sparse_force void *)sys_cache_cached_ptr_get(virt_new); |
| void *va_old = (__sparse_force void *)sys_cache_cached_ptr_get(virt_old); |
| |
| ret = sys_mm_drv_simple_move_array(va_old, size, va_new, |
| phys_new, phys_cnt); |
| |
| /* |
| * Since memcpy() is done in virtual space, need to |
| * flush the cache to make sure the backing physical |
| * pages have the new data. |
| */ |
| sys_cache_data_flush_range(va_new, size); |
| |
| return ret; |
| } |
| |
| static int sys_mm_drv_mm_init(const struct device *dev) |
| { |
| int ret; |
| |
| ARG_UNUSED(dev); |
| |
| /* |
| * Change size of avalible physical memory according to fw register information |
| * in runtime. |
| */ |
| |
| uint32_t avalible_memory_size = ace_hpsram_get_bank_count() * SRAM_BANK_SIZE; |
| |
| L2_PHYS_SRAM_REGION.info.num_blocks = avalible_memory_size / CONFIG_MM_DRV_PAGE_SIZE; |
| |
| ret = calculate_memory_regions(UNUSED_L2_START_ALIGNED); |
| CHECKIF(ret != 0) { |
| return ret; |
| } |
| /* |
| * Initialize memblocks that will store physical |
| * page usage. Initially all physical pages are |
| * mapped in linear way to virtual address space |
| * so mark all pages as allocated. |
| */ |
| |
| ret = sys_mem_blocks_get(&L2_PHYS_SRAM_REGION, |
| (void *) L2_SRAM_BASE, L2_SRAM_PAGES_NUM); |
| CHECKIF(ret != 0) { |
| return ret; |
| } |
| |
| /* |
| * Initialize refcounts for all HPSRAM banks |
| * as fully used because entire HPSRAM is powered on |
| * at system boot. Set reference count to a number |
| * of pages within single memory bank. |
| */ |
| for (int i = 0; i < L2_SRAM_BANK_NUM; i++) { |
| sys_mm_drv_bank_init(&hpsram_bank[i], |
| SRAM_BANK_PAGE_NUM); |
| } |
| #ifdef CONFIG_SOC_INTEL_COMM_WIDGET |
| used_pages = L2_SRAM_BANK_NUM * SRAM_BANK_SIZE / CONFIG_MM_DRV_PAGE_SIZE; |
| #endif |
| |
| #ifdef CONFIG_MM_DRV_INTEL_ADSP_TLB_REMAP_UNUSED_RAM |
| /* |
| * find virtual address range which are unused |
| * in the system |
| */ |
| if (L2_SRAM_BASE + L2_SRAM_SIZE < UNUSED_L2_START_ALIGNED || |
| L2_SRAM_BASE > UNUSED_L2_START_ALIGNED) { |
| |
| __ASSERT(false, |
| "unused l2 pointer is outside of l2 sram range %p\n", |
| (void *)UNUSED_L2_START_ALIGNED); |
| return -EFAULT; |
| } |
| |
| /* |
| * Unmap all unused physical pages from the entire |
| * virtual address space to save power |
| */ |
| size_t unused_size = CONFIG_KERNEL_VM_BASE + CONFIG_KERNEL_VM_SIZE - |
| UNUSED_L2_START_ALIGNED; |
| |
| ret = sys_mm_drv_unmap_region_initial(UINT_TO_POINTER(UNUSED_L2_START_ALIGNED), |
| unused_size); |
| |
| |
| /* Need to reset max pages statistics after unmap */ |
| for (int i = 0; i < L2_SRAM_BANK_NUM; i++) { |
| sys_mm_drv_bank_stats_reset_max(&hpsram_bank[i]); |
| } |
| #endif |
| |
| /* |
| * Notify PMC about used HP-SRAM pages. |
| */ |
| #ifdef CONFIG_SOC_INTEL_COMM_WIDGET |
| sys_mm_drv_report_page_usage(); |
| #endif |
| |
| return 0; |
| } |
| |
| static void adsp_mm_save_context(void *storage_buffer) |
| { |
| uint16_t entry; |
| uint32_t entry_idx; |
| int page_idx; |
| uint32_t phys_addr; |
| volatile uint16_t *tlb_entries = UINT_TO_POINTER(TLB_BASE); |
| uint8_t *location = (uint8_t *) storage_buffer; |
| |
| /* first, store the existing TLB */ |
| memcpy(location, UINT_TO_POINTER(TLB_BASE), TLB_SIZE); |
| location += TLB_SIZE; |
| |
| /* save context of all the pages */ |
| for (page_idx = 0; page_idx < L2_SRAM_PAGES_NUM; page_idx++) { |
| phys_addr = POINTER_TO_UINT(L2_SRAM_BASE) + |
| CONFIG_MM_DRV_PAGE_SIZE * page_idx; |
| if (sys_mem_blocks_is_region_free( |
| &L2_PHYS_SRAM_REGION, |
| UINT_TO_POINTER(phys_addr), 1)) { |
| /* skip a free page */ |
| continue; |
| } |
| |
| /* map the physical addr 1:1 to virtual address */ |
| entry_idx = get_tlb_entry_idx(phys_addr); |
| entry = pa_to_tlb_entry(phys_addr); |
| |
| if (((tlb_entries[entry_idx] & TLB_PADDR_MASK) != entry) || |
| ((tlb_entries[entry_idx] & TLB_ENABLE_BIT) != TLB_ENABLE_BIT)) { |
| /* this page needs remapping, invalidate cache to avoid stalled data |
| * all cache data has been flushed before |
| * do this for pages to remap only |
| */ |
| sys_cache_data_invd_range(UINT_TO_POINTER(phys_addr), |
| CONFIG_MM_DRV_PAGE_SIZE); |
| |
| /* Enable the translation in the TLB entry */ |
| entry |= TLB_ENABLE_BIT; |
| |
| /* map the page 1:1 virtual to physical */ |
| tlb_entries[entry_idx] = entry; |
| } |
| |
| /* save physical address */ |
| *((uint32_t *) location) = phys_addr; |
| location += sizeof(uint32_t); |
| |
| /* save the page */ |
| memcpy(location, |
| UINT_TO_POINTER(phys_addr), |
| CONFIG_MM_DRV_PAGE_SIZE); |
| location += CONFIG_MM_DRV_PAGE_SIZE; |
| } |
| |
| /* write end marker - a null address */ |
| *((uint32_t *) location) = 0; |
| location += sizeof(uint32_t); |
| |
| sys_cache_data_flush_range( |
| storage_buffer, |
| (uint32_t)location - (uint32_t)storage_buffer); |
| |
| |
| /* system state is frozen, ready to poweroff, no further changes will be stored */ |
| } |
| |
| __imr void adsp_mm_restore_context(void *storage_buffer) |
| { |
| /* at this point system must be in a startup state |
| * TLB must be set to initial state |
| * Note! the stack must NOT be in the area being restored |
| */ |
| uint32_t phys_addr; |
| uint8_t *location; |
| |
| /* restore context of all the pages */ |
| location = (uint8_t *) storage_buffer + TLB_SIZE; |
| |
| phys_addr = *((uint32_t *) location); |
| |
| while (phys_addr != 0) { |
| uint32_t phys_addr_uncached = |
| POINTER_TO_UINT(sys_cache_uncached_ptr_get( |
| (void __sparse_cache *)UINT_TO_POINTER(phys_addr))); |
| uint32_t phys_offset = phys_addr - L2_SRAM_BASE; |
| uint32_t bank_idx = (phys_offset / SRAM_BANK_SIZE); |
| |
| location += sizeof(uint32_t); |
| |
| /* turn on memory bank power, wait till the power is on */ |
| __ASSERT_NO_MSG(bank_idx <= ace_hpsram_get_bank_count()); |
| HPSRAM_REGS(bank_idx)->HSxPGCTL = 0; |
| while (HPSRAM_REGS(bank_idx)->HSxPGISTS == 1) { |
| /* k_busy_wait cannot be used here - not available */ |
| } |
| |
| /* copy data to uncached alias and invalidate cache */ |
| bmemcpy(UINT_TO_POINTER(phys_addr_uncached), |
| location, |
| CONFIG_MM_DRV_PAGE_SIZE); |
| sys_cache_data_invd_range(UINT_TO_POINTER(phys_addr), CONFIG_MM_DRV_PAGE_SIZE); |
| |
| location += CONFIG_MM_DRV_PAGE_SIZE; |
| phys_addr = *((uint32_t *) location); |
| } |
| |
| /* restore original TLB table */ |
| bmemcpy(UINT_TO_POINTER(TLB_BASE), storage_buffer, TLB_SIZE); |
| |
| /* HPSRAM memory is restored */ |
| } |
| |
| static uint32_t adsp_mm_get_storage_size(void) |
| { |
| /* |
| * FIXME - currently the function returns a maximum possible size of the buffer |
| * as L3 memory is generally a huge area its OK (and fast) |
| * in future the function may go through the mapping and calculate a required size |
| */ |
| return L2_SRAM_SIZE + TLB_SIZE + (L2_SRAM_PAGES_NUM * sizeof(void *)) |
| + sizeof(void *); |
| } |
| |
| static const struct intel_adsp_tlb_api adsp_tlb_api_func = { |
| .save_context = adsp_mm_save_context, |
| .get_storage_size = adsp_mm_get_storage_size |
| }; |
| |
| DEVICE_DT_DEFINE(DT_INST(0, intel_adsp_mtl_tlb), |
| sys_mm_drv_mm_init, |
| NULL, |
| NULL, |
| NULL, |
| POST_KERNEL, |
| 0, |
| &adsp_tlb_api_func); |