)]}' { "commit": "3ebc2e46b25d6b194427c18dfaa7f97416defb4a", "tree": "ca18b0019f5ddec42258a7868b06df9a7ceacb83", "parents": [ "3830bc51f21f6edb19ceda4b89b0e0f361c28ed4" ], "author": { "name": "Marti Bolivar", "email": "marti@opensourcefoundries.com", "time": "Thu Dec 14 16:52:59 2017 -0500" }, "committer": { "name": "Anas Nashif", "email": "nashif@linux.intel.com", "time": "Fri Dec 15 09:57:30 2017 -0500" }, "message": "scripts: runner: dfu-util: support DT-based flashing for DfuSe\n\nEnable DT support in the dfu-util flasher when the target is a\nDfuSe (DFU + ST extensions) device.\n\nUntangling DfuSe-specific options (currently, the default is \u0027leave\u0027,\nto immediately start running after the flashing is done) from the\nactual address makes this cleaner, and sets up a subsequent patch to\nlet callers set DfuSe options.\n\nIt also lets us fix an unnecessary printline when flashing DfuSe\ndevices. There\u0027s no need to reset those, since the \u0027leave\u0027 modifier\nstarts execution immediately.\n\nSigned-off-by: Marti Bolivar \u003cmarti@opensourcefoundries.com\u003e\n", "tree_diff": [ { "type": "modify", "old_id": "ca9346ea8ec93164d244c005cd65bc0c23d60006", "old_mode": 33188, "old_path": "boards/arm/96b_carbon/board.cmake", "new_id": "f998b714c82572f5240019011bc314df35b28479", "new_mode": 33188, "new_path": "boards/arm/96b_carbon/board.cmake" }, { "type": "modify", "old_id": "e7303d5e8cd04982cfa1a4a4613ef6480b99f794", "old_mode": 33188, "old_path": "scripts/support/runner/dfu.py", "new_id": "d41f162c0ed05910766d59e7274173d8d2dede20", "new_mode": 33188, "new_path": "scripts/support/runner/dfu.py" } ] }