/*
 * Copyright (c) 2019 Manivannan Sadhasivam
 * Copyright (c) 2020 Grinn
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <drivers/gpio.h>
#include <drivers/lora.h>
#include <drivers/spi.h>
#include <zephyr.h>

#include "sx12xx_common.h"

#include <logging/log.h>
LOG_MODULE_REGISTER(sx127x, CONFIG_LORA_LOG_LEVEL);

#if DT_HAS_COMPAT_STATUS_OKAY(semtech_sx1272)

#include <sx1272/sx1272.h>

#define DT_DRV_COMPAT semtech_sx1272

#define SX127xCheckRfFrequency SX1272CheckRfFrequency
#define SX127xGetBoardTcxoWakeupTime SX1272GetBoardTcxoWakeupTime
#define SX127xSetAntSwLowPower SX1272SetAntSwLowPower
#define SX127xSetBoardTcxo SX1272SetBoardTcxo
#define SX127xSetAntSw SX1272SetAntSw
#define SX127xReset SX1272Reset
#define SX127xIoIrqInit SX1272IoIrqInit
#define SX127xWriteBuffer SX1272WriteBuffer
#define SX127xReadBuffer SX1272ReadBuffer
#define SX127xSetRfTxPower SX1272SetRfTxPower
#define SX127xGetDio1PinState SX1272GetDio1PinState
#define SX127xInit SX1272Init
#define SX127xGetStatus SX1272GetStatus
#define SX127xSetModem SX1272SetModem
#define SX127xSetChannel SX1272SetChannel
#define SX127xIsChannelFree SX1272IsChannelFree
#define SX127xRandom SX1272Random
#define SX127xSetRxConfig SX1272SetRxConfig
#define SX127xSetTxConfig SX1272SetTxConfig
#define SX127xGetTimeOnAir SX1272GetTimeOnAir
#define SX127xSend SX1272Send
#define SX127xSetSleep SX1272SetSleep
#define SX127xSetStby SX1272SetStby
#define SX127xSetRx SX1272SetRx
#define SX127xWrite SX1272Write
#define SX127xRead SX1272Read
#define SX127xSetMaxPayloadLength SX1272SetMaxPayloadLength
#define SX127xSetPublicNetwork SX1272SetPublicNetwork
#define SX127xGetWakeupTime SX1272GetWakeupTime
#define SX127xSetTxContinuousWave SX1272SetTxContinuousWave

#elif DT_HAS_COMPAT_STATUS_OKAY(semtech_sx1276)

#include <sx1276/sx1276.h>

#define DT_DRV_COMPAT semtech_sx1276

#define SX127xCheckRfFrequency SX1276CheckRfFrequency
#define SX127xGetBoardTcxoWakeupTime SX1276GetBoardTcxoWakeupTime
#define SX127xSetAntSwLowPower SX1276SetAntSwLowPower
#define SX127xSetBoardTcxo SX1276SetBoardTcxo
#define SX127xSetAntSw SX1276SetAntSw
#define SX127xReset SX1276Reset
#define SX127xIoIrqInit SX1276IoIrqInit
#define SX127xWriteBuffer SX1276WriteBuffer
#define SX127xReadBuffer SX1276ReadBuffer
#define SX127xSetRfTxPower SX1276SetRfTxPower
#define SX127xGetDio1PinState SX1276GetDio1PinState
#define SX127xInit SX1276Init
#define SX127xGetStatus SX1276GetStatus
#define SX127xSetModem SX1276SetModem
#define SX127xSetChannel SX1276SetChannel
#define SX127xIsChannelFree SX1276IsChannelFree
#define SX127xRandom SX1276Random
#define SX127xSetRxConfig SX1276SetRxConfig
#define SX127xSetTxConfig SX1276SetTxConfig
#define SX127xGetTimeOnAir SX1276GetTimeOnAir
#define SX127xSend SX1276Send
#define SX127xSetSleep SX1276SetSleep
#define SX127xSetStby SX1276SetStby
#define SX127xSetRx SX1276SetRx
#define SX127xWrite SX1276Write
#define SX127xRead SX1276Read
#define SX127xSetMaxPayloadLength SX1276SetMaxPayloadLength
#define SX127xSetPublicNetwork SX1276SetPublicNetwork
#define SX127xGetWakeupTime SX1276GetWakeupTime
#define SX127xSetTxContinuousWave SX1276SetTxContinuousWave

#else
#error No SX127x instance in device tree.
#endif

BUILD_ASSERT(DT_NUM_INST_STATUS_OKAY(semtech_sx1272) +
	     DT_NUM_INST_STATUS_OKAY(semtech_sx1276) <= 1,
	     "Multiple SX127x instances in DT");

#if DT_INST_NODE_HAS_PROP(0, tcxo_power_startup_delay_ms)
#define TCXO_POWER_STARTUP_DELAY_MS			\
	DT_INST_PROP(0, tcxo_power_startup_delay_ms)
#else
#define TCXO_POWER_STARTUP_DELAY_MS		0
#endif

/*
 * Those macros must be in sync with 'power-amplifier-output' dts property.
 */
#define SX127X_PA_RFO				0
#define SX127X_PA_BOOST				1

#if DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios) &&	\
	DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
#define SX127X_PA_OUTPUT(power)				\
	((power) > 14 ? SX127X_PA_BOOST : SX127X_PA_RFO)
#elif DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios)
#define SX127X_PA_OUTPUT(power)		SX127X_PA_RFO
#elif DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
#define SX127X_PA_OUTPUT(power)		SX127X_PA_BOOST
#elif DT_INST_NODE_HAS_PROP(0, power_amplifier_output)
#define SX127X_PA_OUTPUT(power)				\
	DT_INST_ENUM_IDX(0, power_amplifier_output)
#else
BUILD_ASSERT(0, "None of rfo-enable-gpios, pa-boost-enable-gpios and "
	     "power-amplifier-output has been specified. "
	     "Look at semtech,sx127x-base.yaml to fix that.");
#endif

#define SX127X_PADAC_20DBM_ON (RF_PADAC_20DBM_ON)
#define SX127X_PADAC_20DBM_OFF (RF_PADAC_20DBM_OFF)
#define SX127X_PADAC_20DBM_MASK (~RF_PADAC_20DBM_MASK)

#define SX127X_PACONFIG_PASELECT_PABOOST (RF_PACONFIG_PASELECT_PABOOST)
#define SX127X_PACONFIG_OUTPUTPOWER_MASK (~RF_PACONFIG_OUTPUTPOWER_MASK)

#ifdef RF_PACONFIG_MAX_POWER_MASK
#define SX127X_PACONFIG_MAX_POWER_SHIFT 4
#endif

extern DioIrqHandler *DioIrq[];

/* Helper macro that UTIL_LISTIFY can use and produces an element with comma */
#define SX127X_DIO_GPIO_LEN(inst) \
	DT_INST_PROP_LEN(inst, dio_gpios)

#define SX127X_DIO_GPIO_ELEM(idx, inst) \
	GPIO_DT_SPEC_INST_GET_BY_IDX(inst, dio_gpios, idx)

#define SX127X_DIO_GPIO_INIT(n) \
	LISTIFY(SX127X_DIO_GPIO_LEN(n), SX127X_DIO_GPIO_ELEM, (,), n)

static const struct gpio_dt_spec sx127x_dios[] = { SX127X_DIO_GPIO_INIT(0) };

#define SX127X_MAX_DIO ARRAY_SIZE(sx127x_dios)

struct sx127x_config {
	struct spi_dt_spec bus;
	struct gpio_dt_spec reset;
#if DT_INST_NODE_HAS_PROP(0, antenna_enable_gpios)
	struct gpio_dt_spec antenna_enable;
#endif
#if DT_INST_NODE_HAS_PROP(0, rfi_enable_gpios)
	struct gpio_dt_spec rfi_enable;
#endif
#if DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios)
	struct gpio_dt_spec rfo_enable;
#endif
#if DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
	struct gpio_dt_spec pa_boost_enable;
#endif
#if DT_INST_NODE_HAS_PROP(0, tcxo_power_gpios)
	struct gpio_dt_spec tcxo_power;
#endif
};

static const struct sx127x_config dev_config = {
	.bus = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8) | SPI_TRANSFER_MSB, 0),
	.reset = GPIO_DT_SPEC_INST_GET(0, reset_gpios),
#if DT_INST_NODE_HAS_PROP(0, antenna_enable_gpios)
	.antenna_enable = GPIO_DT_SPEC_INST_GET(0, antenna_enable_gpios),
#endif
#if DT_INST_NODE_HAS_PROP(0, rfi_enable_gpios)
	.rfi_enable = GPIO_DT_SPEC_INST_GET(0, rfi_enable_gpios),
#endif
#if DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios)
	.rfo_enable = GPIO_DT_SPEC_INST_GET(0, rfo_enable_gpios),
#endif
#if DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
	.pa_boost_enable = GPIO_DT_SPEC_INST_GET(0, pa_boost_enable_gpios),
#endif
#if DT_INST_NODE_HAS_PROP(0, tcxo_power_gpios)
	.tcxo_power = GPIO_DT_SPEC_INST_GET(0, tcxo_power_gpios),
#endif
};

static struct sx127x_data {
#if DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios) &&	\
	DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
	uint8_t tx_power;
#endif
#if DT_INST_NODE_HAS_PROP(0, tcxo_power_gpios)
	bool tcxo_power_enabled;
#endif
	struct k_work dio_work[SX127X_MAX_DIO];
} dev_data;

static int8_t clamp_int8(int8_t x, int8_t min, int8_t max)
{
	if (x < min) {
		return min;
	} else if (x > max) {
		return max;
	} else {
		return x;
	}
}

bool SX127xCheckRfFrequency(uint32_t frequency)
{
	/* TODO */
	return true;
}

uint32_t SX127xGetBoardTcxoWakeupTime(void)
{
	return TCXO_POWER_STARTUP_DELAY_MS;
}

static inline void sx127x_antenna_enable(int val)
{
#if DT_INST_NODE_HAS_PROP(0, antenna_enable_gpios)
	gpio_pin_set_dt(&dev_config.antenna_enable, val);
#endif
}

static inline void sx127x_rfi_enable(int val)
{
#if DT_INST_NODE_HAS_PROP(0, rfi_enable_gpios)
	gpio_pin_set_dt(&dev_config.rfi_enable, val);
#endif
}

static inline void sx127x_rfo_enable(int val)
{
#if DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios)
	gpio_pin_set_dt(&dev_config.rfo_enable, val);
#endif
}

static inline void sx127x_pa_boost_enable(int val)
{
#if DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
	gpio_pin_set_dt(&dev_config.pa_boost_enable, val);
#endif
}

void SX127xSetAntSwLowPower(bool low_power)
{
	if (low_power) {
		/* force inactive (low power) state of all antenna paths */
		sx127x_rfi_enable(0);
		sx127x_rfo_enable(0);
		sx127x_pa_boost_enable(0);

		sx127x_antenna_enable(0);
	} else {
		sx127x_antenna_enable(1);

		/* rely on SX127xSetAntSw() to configure proper antenna path */
	}
}

void SX127xSetBoardTcxo(uint8_t state)
{
#if DT_INST_NODE_HAS_PROP(0, tcxo_power_gpios)
	bool enable = state;

	if (enable == dev_data.tcxo_power_enabled) {
		return;
	}

	if (enable) {
		gpio_pin_set_dt(&dev_config.tcxo_power, 1);

		if (TCXO_POWER_STARTUP_DELAY_MS > 0) {
			k_sleep(K_MSEC(TCXO_POWER_STARTUP_DELAY_MS));
		}
	} else {
		gpio_pin_set_dt(&dev_config.tcxo_power, 0);
	}

	dev_data.tcxo_power_enabled = enable;
#endif
}

void SX127xSetAntSw(uint8_t opMode)
{
	switch (opMode) {
	case RFLR_OPMODE_TRANSMITTER:
		sx127x_rfi_enable(0);

		if (SX127X_PA_OUTPUT(dev_data.tx_power) == SX127X_PA_BOOST) {
			sx127x_rfo_enable(0);
			sx127x_pa_boost_enable(1);
		} else {
			sx127x_pa_boost_enable(0);
			sx127x_rfo_enable(1);
		}
		break;
	default:
		sx127x_rfo_enable(0);
		sx127x_pa_boost_enable(0);
		sx127x_rfi_enable(1);
		break;
	}
}

void SX127xReset(void)
{
	SX127xSetBoardTcxo(true);

	gpio_pin_set_dt(&dev_config.reset, 1);

	k_sleep(K_MSEC(1));

	gpio_pin_set_dt(&dev_config.reset, 0);

	k_sleep(K_MSEC(6));
}

static void sx127x_dio_work_handle(struct k_work *work)
{
	int dio = work - dev_data.dio_work;

	(*DioIrq[dio])(NULL);
}

static void sx127x_irq_callback(const struct device *dev,
				struct gpio_callback *cb, uint32_t pins)
{
	unsigned int i, pin;

	pin = find_lsb_set(pins) - 1;

	for (i = 0; i < SX127X_MAX_DIO; i++) {
		if (dev == sx127x_dios[i].port &&
		    pin == sx127x_dios[i].pin) {
			k_work_submit(&dev_data.dio_work[i]);
		}
	}
}

void SX127xIoIrqInit(DioIrqHandler **irqHandlers)
{
	unsigned int i;
	static struct gpio_callback callbacks[SX127X_MAX_DIO];

	/* Setup DIO gpios */
	for (i = 0; i < SX127X_MAX_DIO; i++) {
		if (!irqHandlers[i]) {
			continue;
		}

		if (!device_is_ready(sx127x_dios[i].port)) {
			LOG_ERR("GPIO port %s not ready",
				sx127x_dios[i].port->name);
			return;
		}

		k_work_init(&dev_data.dio_work[i], sx127x_dio_work_handle);

		gpio_pin_configure_dt(&sx127x_dios[i], GPIO_INPUT);

		gpio_init_callback(&callbacks[i],
				   sx127x_irq_callback,
				   BIT(sx127x_dios[i].pin));

		if (gpio_add_callback(sx127x_dios[i].port, &callbacks[i]) < 0) {
			LOG_ERR("Could not set gpio callback.");
			return;
		}
		gpio_pin_interrupt_configure_dt(&sx127x_dios[i],
						GPIO_INT_EDGE_TO_ACTIVE);
	}

}

static int sx127x_transceive(uint8_t reg, bool write, void *data, size_t length)
{
	const struct spi_buf buf[2] = {
		{
			.buf = &reg,
			.len = sizeof(reg)
		},
		{
			.buf = data,
			.len = length
		}
	};

	struct spi_buf_set tx = {
		.buffers = buf,
		.count = ARRAY_SIZE(buf),
	};

	if (!write) {
		const struct spi_buf_set rx = {
			.buffers = buf,
			.count = ARRAY_SIZE(buf)
		};

		return spi_transceive_dt(&dev_config.bus, &tx, &rx);
	}

	return spi_write_dt(&dev_config.bus, &tx);
}

int sx127x_read(uint8_t reg_addr, uint8_t *data, uint8_t len)
{
	return sx127x_transceive(reg_addr, false, data, len);
}

int sx127x_write(uint8_t reg_addr, uint8_t *data, uint8_t len)
{
	return sx127x_transceive(reg_addr | BIT(7), true, data, len);
}

void SX127xWriteBuffer(uint32_t addr, uint8_t *buffer, uint8_t size)
{
	int ret;

	ret = sx127x_write(addr, buffer, size);
	if (ret < 0) {
		LOG_ERR("Unable to write address: 0x%x", addr);
	}
}

void SX127xReadBuffer(uint32_t addr, uint8_t *buffer, uint8_t size)
{
	int ret;

	ret = sx127x_read(addr, buffer, size);
	if (ret < 0) {
		LOG_ERR("Unable to read address: 0x%x", addr);
	}
}

void SX127xSetRfTxPower(int8_t power)
{
	int ret;
	uint8_t pa_config = 0;
	uint8_t pa_dac = 0;

	ret = sx127x_read(REG_PADAC, &pa_dac, 1);
	if (ret < 0) {
		LOG_ERR("Unable to read PA dac");
		return;
	}

	pa_dac &= ~SX127X_PADAC_20DBM_MASK;

	if (SX127X_PA_OUTPUT(power) == SX127X_PA_BOOST) {
		power = clamp_int8(power, 2, 20);

		pa_config |= SX127X_PACONFIG_PASELECT_PABOOST;
		if (power > 17) {
			pa_dac |= SX127X_PADAC_20DBM_ON;
			pa_config |= (power - 5) & SX127X_PACONFIG_OUTPUTPOWER_MASK;
		} else {
			pa_dac |= SX127X_PADAC_20DBM_OFF;
			pa_config |= (power - 2) & SX127X_PACONFIG_OUTPUTPOWER_MASK;
		}
	} else {
#ifdef SX127X_PACONFIG_MAX_POWER_SHIFT
		power = clamp_int8(power, -4, 15);

		pa_dac |= SX127X_PADAC_20DBM_OFF;
		if (power > 0) {
			/* Set the power range to 0 -- 10.8+0.6*7 dBm */
			pa_config |= 7 << SX127X_PACONFIG_MAX_POWER_SHIFT;
			pa_config |= power & SX127X_PACONFIG_OUTPUTPOWER_MASK;
		} else {
			/* Set the power range to -4.2 -- 10.8+0.6*0 dBm */
			pa_config |= (power + 4) & SX127X_PACONFIG_OUTPUTPOWER_MASK;
		}
#else
		power = clamp_int8(power, -1, 14);

		pa_dac |= SX127X_PADAC_20DBM_OFF;
		pa_config |= (power + 1) & SX127X_PACONFIG_OUTPUTPOWER_MASK;
#endif
	}

#if DT_INST_NODE_HAS_PROP(0, rfo_enable_gpios) &&	\
	DT_INST_NODE_HAS_PROP(0, pa_boost_enable_gpios)
	dev_data.tx_power = power;
#endif

	ret = sx127x_write(REG_PACONFIG, &pa_config, 1);
	if (ret < 0) {
		LOG_ERR("Unable to write PA config");
		return;
	}

	ret = sx127x_write(REG_PADAC, &pa_dac, 1);
	if (ret < 0) {
		LOG_ERR("Unable to write PA dac");
		return;
	}
}

uint32_t SX127xGetDio1PinState(void)
{
#if SX127X_DIO_GPIO_LEN(0) >= 2
	if (gpio_pin_get_dt(&sx127x_dios[1]) > 0) {
		return 1U;
	}
#endif

	return 0U;
}

/* Initialize Radio driver callbacks */
const struct Radio_s Radio = {
	.Init = SX127xInit,
	.GetStatus = SX127xGetStatus,
	.SetModem = SX127xSetModem,
	.SetChannel = SX127xSetChannel,
	.IsChannelFree = SX127xIsChannelFree,
	.Random = SX127xRandom,
	.SetRxConfig = SX127xSetRxConfig,
	.SetTxConfig = SX127xSetTxConfig,
	.CheckRfFrequency = SX127xCheckRfFrequency,
	.TimeOnAir = SX127xGetTimeOnAir,
	.Send = SX127xSend,
	.Sleep = SX127xSetSleep,
	.Standby = SX127xSetStby,
	.Rx = SX127xSetRx,
	.Write = SX127xWrite,
	.Read = SX127xRead,
	.WriteBuffer = SX127xWriteBuffer,
	.ReadBuffer = SX127xReadBuffer,
	.SetMaxPayloadLength = SX127xSetMaxPayloadLength,
	.SetPublicNetwork = SX127xSetPublicNetwork,
	.GetWakeupTime = SX127xGetWakeupTime,
	.IrqProcess = NULL,
	.RxBoosted = NULL,
	.SetRxDutyCycle = NULL,
	.SetTxContinuousWave = SX127xSetTxContinuousWave,
};

static int sx127x_antenna_configure(void)
{
	int ret;

	ret = sx12xx_configure_pin(antenna_enable, GPIO_OUTPUT_INACTIVE);
	if (ret) {
		return ret;
	}

	ret = sx12xx_configure_pin(rfi_enable, GPIO_OUTPUT_INACTIVE);
	if (ret) {
		return ret;
	}

	ret = sx12xx_configure_pin(rfo_enable, GPIO_OUTPUT_INACTIVE);
	if (ret) {
		return ret;
	}

	ret = sx12xx_configure_pin(pa_boost_enable, GPIO_OUTPUT_INACTIVE);
	if (ret) {
		return ret;
	}

	return 0;
}

static int sx127x_lora_init(const struct device *dev)
{
	int ret;
	uint8_t regval;

	if (!spi_is_ready(&dev_config.bus)) {
		LOG_ERR("SPI device not ready");
		return -ENODEV;
	}

	ret = sx12xx_configure_pin(tcxo_power, GPIO_OUTPUT_INACTIVE);
	if (ret) {
		return ret;
	}

	/* Setup Reset gpio and perform soft reset */
	ret = sx12xx_configure_pin(reset, GPIO_OUTPUT_ACTIVE);
	if (ret) {
		return ret;
	}

	k_sleep(K_MSEC(100));
	gpio_pin_set_dt(&dev_config.reset, 0);
	k_sleep(K_MSEC(100));

	ret = sx127x_read(REG_VERSION, &regval, 1);
	if (ret < 0) {
		LOG_ERR("Unable to read version info");
		return -EIO;
	}

	LOG_INF("SX127x version 0x%02x found", regval);

	ret = sx127x_antenna_configure();
	if (ret < 0) {
		LOG_ERR("Unable to configure antenna");
		return -EIO;
	}

	ret = sx12xx_init(dev);
	if (ret < 0) {
		LOG_ERR("Failed to initialize SX12xx common");
		return ret;
	}

	return 0;
}

static const struct lora_driver_api sx127x_lora_api = {
	.config = sx12xx_lora_config,
	.send = sx12xx_lora_send,
	.send_async = sx12xx_lora_send_async,
	.recv = sx12xx_lora_recv,
	.recv_async = sx12xx_lora_recv_async,
	.test_cw = sx12xx_lora_test_cw,
};

DEVICE_DT_INST_DEFINE(0, &sx127x_lora_init, NULL, NULL,
		      NULL, POST_KERNEL, CONFIG_LORA_INIT_PRIORITY,
		      &sx127x_lora_api);