/*
 * Copyright (c) 2018, Cue Health Inc
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#include <nrfx_pwm.h>
#include <pwm.h>
#include <hal/nrf_gpio.h>
#include <stdbool.h>

#define LOG_LEVEL CONFIG_PWM_LOG_LEVEL
#include <logging/log.h>
LOG_MODULE_REGISTER(pwm_nrfx);

#define PWM_NRFX_CH_POLARITY_MASK       BIT(15)
#define PWM_NRFX_CH_PULSE_CYCLES_MASK   BIT_MASK(15)
#define PWM_NRFX_CH_VALUE_NORMAL        PWM_NRFX_CH_POLARITY_MASK
#define PWM_NRFX_CH_VALUE_INVERTED      (0)
#define PWM_NRFX_CH_PIN_MASK            ~NRFX_PWM_PIN_INVERTED

struct pwm_nrfx_config {
	nrfx_pwm_t pwm;
	nrfx_pwm_config_t initial_config;
	nrf_pwm_sequence_t seq;
};

struct pwm_nrfx_data {
	u32_t period_cycles;
	u16_t current[NRF_PWM_CHANNEL_COUNT];
	u16_t countertop;
	u8_t  prescaler;
};

static u32_t pwm_period_check_and_set(const struct pwm_nrfx_config *config,
				      struct pwm_nrfx_data *data,
				      u32_t pwm,
				      u32_t period_cycles)
{
	NRF_PWM_Type *pwm_instance = config->pwm.p_registers;

	if (!nrfx_pwm_is_stopped(&config->pwm)) {
		/* Succeed if requested period matches already used period */
		if (period_cycles == data->period_cycles) {
			return 0;
		}

		/* Fail if requested period != already running period */
		LOG_ERR("Fail:requested period cycles:%d, != used %d\n",
			period_cycles, data->period_cycles);
		return -EINVAL;
	}

	/* Check if period_cycles is above COUNTERTOP MAX value, if so, we
	 * have to see if we can change frequency to something that will fit
	 */
	if (period_cycles > PWM_COUNTERTOP_COUNTERTOP_Msk) {
		/* See if there is a prescaler that will make it work: */
		bool matching_prescaler_found = false;

		/* Go through all available prescaler values on device (skip 0
		 * here as it is used in the 'else' block).
		 * nRF52832 has 0-7 (Div1 - Div128)
		 */
		for (u8_t prescaler = 1;
		     prescaler <= PWM_PRESCALER_PRESCALER_Msk;
		     prescaler++) {
			u32_t new_countertop = period_cycles >> prescaler;

			/* If we find value that fits, set it, continue */
			if (new_countertop <= PWM_COUNTERTOP_COUNTERTOP_Msk) {
				data->prescaler = prescaler;
				data->countertop = new_countertop;
				data->period_cycles = period_cycles;
				matching_prescaler_found = true;
				break;
			}
		}

		/* Check if able to find matching prescaler and countertop */
		if (matching_prescaler_found == false) {
			LOG_ERR("Prescaler for period_cycles %d not found.\n",
				period_cycles);
			return -EINVAL;
		}
	} else {
		/* If period_cycles fit the PWM counter without dividing
		 * the PWM clock, use the zero prescaler.
		 */
		data->prescaler = 0U;
		data->countertop = period_cycles;
		data->period_cycles = period_cycles;
	}

	/* Write new PRESCALER and COUNTERTOP to PWM instance */
	nrf_pwm_configure(pwm_instance,
			  data->prescaler,
			  config->initial_config.count_mode,
			  data->countertop);

	return 0;
}

static u8_t pwm_channel_map(const uint8_t *output_pins, u32_t pwm)
{
	u8_t i;

	/* Find pin, return channel number */
	for (i = 0U; i < NRF_PWM_CHANNEL_COUNT; i++) {
		if (output_pins[i] != NRFX_PWM_PIN_NOT_USED
		    && (pwm == (output_pins[i] & PWM_NRFX_CH_PIN_MASK))) {
			return i;
		}
	}

	/* Return NRF_PWM_CHANNEL_COUNT to show that PWM pin was not found. */
	return NRF_PWM_CHANNEL_COUNT;
}

static bool any_channel_active(const struct pwm_nrfx_data *data)
{
	u8_t channel;

	for (channel = 0U; channel < NRF_PWM_CHANNEL_COUNT; channel++) {
		u16_t channel_pulse_cycle =
			data->current[channel]
			& PWM_NRFX_CH_PULSE_CYCLES_MASK;

		if (channel_pulse_cycle > 0
		    && channel_pulse_cycle < data->countertop) {
			return true;
		}
	}

	return false;
}

static int pwm_nrfx_pin_set(struct device *dev, u32_t pwm,
			    u32_t period_cycles, u32_t pulse_cycles)
{
	/* We assume here that period_cycles will always be 16MHz
	 * peripheral clock. Since pwm_nrfx_get_cycles_per_sec() function might
	 * be removed, see ISSUE #6958.
	 * TODO: Remove this comment when issue has been resolved.
	 */
	const struct pwm_nrfx_config *config = dev->config->config_info;
	struct pwm_nrfx_data *data = dev->driver_data;
	u8_t channel;
	u32_t ret;

	/* Check if PWM pin is one of the predefiend DTS config pins.
	 * Return its array index (channel number),
	 * or NRF_PWM_CHANNEL_COUNT if not initialized through DTS.
	 */
	channel = pwm_channel_map(config->initial_config.output_pins, pwm);
	if (channel == NRF_PWM_CHANNEL_COUNT) {
		LOG_ERR("PWM pin %d not enabled through DTS configuration.",
			pwm);
		return -EINVAL;
	}

	/* Check if period_cycle is either matching currently used, or
	 * possible to use with our prescaler options.
	 */
	ret = pwm_period_check_and_set(config, data, pwm, period_cycles);
	if (ret) {
		LOG_ERR("Incompatible period %d", period_cycles);
		return ret;
	}

	/* Check if pulse is bigger than period, fail if so */
	if (pulse_cycles > period_cycles) {
		LOG_ERR("Invalid pulse_cycles %d, > period_cycles %d.",
			pulse_cycles, period_cycles);
		return -EINVAL;
	}

	/* Store new pulse value bit[14:0], and polarity bit[15] for channel. */
	data->current[channel] = (
		(data->current[channel] & PWM_NRFX_CH_POLARITY_MASK)
		| (pulse_cycles >> data->prescaler));

	/* If Channel is off/fully on (duty 0% or 100%), also set GPIO register
	 * since this will the setting if we in the future disable the
	 * peripheral when no channels are active.
	 */
	if (pulse_cycles == 0U || pulse_cycles == period_cycles) {
		/* If pulse 0% and pin not inverted, set LOW.
		 * If pulse 100% and pin inverted, set LOW.
		 * If pulse 0% and pin inverted, set HIGH.
		 * If pulse 100% and pin not inverted, set HIGH.
		 */
		bool channel_inverted_state =
			config->initial_config.output_pins[channel]
			& NRFX_PWM_PIN_INVERTED;

		bool pulse_0_and_not_inverted =
			(pulse_cycles == 0U)
			&& !channel_inverted_state;
		bool pulse_100_and_inverted =
			(pulse_cycles == period_cycles)
			&& channel_inverted_state;

		if (pulse_0_and_not_inverted || pulse_100_and_inverted) {
			nrf_gpio_pin_clear(pwm);
		} else {
			nrf_gpio_pin_set(pwm);
		}
	}

	/* Check if all channels are off (duty 0% or 100%) */
	if (!any_channel_active(data)) {
		nrfx_pwm_stop(&config->pwm, false);
	} else {
		/* A PWM Channel is active: Start sequence. */

		/* Since we are playing the sequence in a loop, the
		 * sequence only has to be started when its not already
		 * playing. The new channel values will be used
		 * immediately when they are written into the seq array.
		 */
		nrfx_pwm_simple_playback(&config->pwm,
			 &config->seq,
			 1,
			 NRFX_PWM_FLAG_LOOP);
	}

	return 0;
}

static int pwm_nrfx_get_cycles_per_sec(struct device *dev, u32_t pwm,
				       u64_t *cycles)
{
	/* TODO: Since this function might be removed, we will always return
	 * 16MHz from this function and handle the conversion with prescaler,
	 * etc, in the pin set function. See issue #6958.
	 */
	*cycles = 16ul * 1000ul * 1000ul;

	return 0;
}

static const struct pwm_driver_api pwm_nrfx_drv_api_funcs = {
	.pin_set = pwm_nrfx_pin_set,
	.get_cycles_per_sec = pwm_nrfx_get_cycles_per_sec,
};

static int pwm_nrfx_init(struct device *dev)
{
	const struct pwm_nrfx_config *config = dev->config->config_info;

	nrfx_err_t result = nrfx_pwm_init(&config->pwm,
					  &config->initial_config,
					  NULL);
	if (result != NRFX_SUCCESS) {
		LOG_ERR("Failed to initialize device: %s", dev->config->name);
		return -EBUSY;
	}

	return 0;
}

#ifdef CONFIG_DEVICE_POWER_MANAGEMENT

static void pwm_nrfx_uninit(struct device *dev)
{
	const struct pwm_nrfx_config *config = dev->config->config_info;

	nrfx_pwm_uninit(&config->pwm);
}

static int pwm_nrfx_set_power_state(u32_t new_state,
				    u32_t current_state,
				    struct device *dev)
{
	int err = 0;

	switch (new_state) {
	case DEVICE_PM_ACTIVE_STATE:
		err = pwm_nrfx_init(dev);
		break;
	case DEVICE_PM_LOW_POWER_STATE:
	case DEVICE_PM_SUSPEND_STATE:
	case DEVICE_PM_FORCE_SUSPEND_STATE:
	case DEVICE_PM_OFF_STATE:
		if (current_state == DEVICE_PM_ACTIVE_STATE) {
			pwm_nrfx_uninit(dev);
		}
		break;
	default:
		assert(false);
		break;
	}
	return err;
}

static int pwm_nrfx_pm_control(struct device *dev,
			       u32_t ctrl_command,
			       void *context,
			       u32_t *current_state)
{
	int err = 0;

	if (ctrl_command == DEVICE_PM_SET_POWER_STATE) {
		u32_t new_state = *((const u32_t *)context);

		if (new_state != (*current_state)) {
			err = pwm_nrfx_set_power_state(new_state,
						       *current_state,
						       dev);
			if (!err) {
				(*current_state) = new_state;
			}
		}
	} else {
		assert(ctrl_command == DEVICE_PM_GET_POWER_STATE);
		*((u32_t *)context) = (*current_state);
	}

	return err;
}

#define PWM_NRFX_PM_CONTROL(idx)					\
	static int pwm_##idx##_nrfx_pm_control(struct device *dev,	\
					       u32_t ctrl_command,	\
					       void *context,		\
					       device_pm_cb cb,		\
					       void *arg)		\
	{								\
		static u32_t current_state = DEVICE_PM_ACTIVE_STATE;	\
		int ret = 0;                                            \
		ret = pwm_nrfx_pm_control(dev, ctrl_command, context,	\
					   &current_state);		\
		if (cb) {                                               \
			cb(dev, ret, context, arg);                     \
		}                                                       \
		return ret;                                             \
	}
#else

#define PWM_NRFX_PM_CONTROL(idx)

#endif /* CONFIG_DEVICE_POWER_MANAGEMENT */

#define PWM_NRFX_OUTPUT_PIN(dev_idx, ch_idx)				      \
	(DT_NORDIC_NRF_PWM_PWM_##dev_idx##_CH##ch_idx##_PIN |		      \
	 (DT_NORDIC_NRF_PWM_PWM_##dev_idx##_CH##ch_idx##_INVERTED ?	      \
	  NRFX_PWM_PIN_INVERTED : 0))

#define PWM_NRFX_DEFAULT_VALUE(dev_idx, ch_idx)                             \
	(DT_NORDIC_NRF_PWM_PWM_##dev_idx##_CH##ch_idx##_INVERTED ?            \
	 PWM_NRFX_CH_VALUE_INVERTED : PWM_NRFX_CH_VALUE_NORMAL)

#define PWM_NRFX_DEVICE(idx)						      \
	static struct pwm_nrfx_data pwm_nrfx_##idx##_data = {		      \
		.current = {						      \
			PWM_NRFX_DEFAULT_VALUE(idx, 0),			      \
			PWM_NRFX_DEFAULT_VALUE(idx, 1),			      \
			PWM_NRFX_DEFAULT_VALUE(idx, 2),			      \
			PWM_NRFX_DEFAULT_VALUE(idx, 3),			      \
		},							      \
		.countertop = NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE,	      \
		.prescaler = NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 	      \
	};								      \
	static const struct pwm_nrfx_config pwm_nrfx_##idx##z_config = {	      \
		.pwm = NRFX_PWM_INSTANCE(idx),				      \
		.initial_config = {					      \
			.output_pins = {				      \
				PWM_NRFX_OUTPUT_PIN(idx, 0),		      \
				PWM_NRFX_OUTPUT_PIN(idx, 1),		      \
				PWM_NRFX_OUTPUT_PIN(idx, 2),		      \
				PWM_NRFX_OUTPUT_PIN(idx, 3),		      \
			},						      \
			.base_clock = NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK,     \
			.count_mode = NRF_PWM_MODE_UP,			      \
			.top_value = NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE,	      \
			.load_mode = NRF_PWM_LOAD_INDIVIDUAL,		      \
			.step_mode = NRF_PWM_STEP_TRIGGERED,		      \
		},							      \
		.seq.values.p_raw = pwm_nrfx_##idx##_data.current,	      \
		.seq.length = NRF_PWM_CHANNEL_COUNT			      \
	};								      \
	PWM_NRFX_PM_CONTROL(idx)					      \
	DEVICE_DEFINE(pwm_nrfx_##idx,					      \
		      DT_NORDIC_NRF_PWM_PWM_##idx##_LABEL,		      \
		      pwm_nrfx_init, pwm_##idx##_nrfx_pm_control,	      \
		      &pwm_nrfx_##idx##_data,				      \
		      &pwm_nrfx_##idx##z_config,				      \
		      POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,	      \
		      &pwm_nrfx_drv_api_funcs)

#ifdef CONFIG_PWM_0
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH0_PIN
#define DT_NORDIC_NRF_PWM_PWM_0_CH0_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH0_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_0_CH0_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH1_PIN
#define DT_NORDIC_NRF_PWM_PWM_0_CH1_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH1_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_0_CH1_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH2_PIN
#define DT_NORDIC_NRF_PWM_PWM_0_CH2_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH2_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_0_CH2_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH3_PIN
#define DT_NORDIC_NRF_PWM_PWM_0_CH3_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_0_CH3_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_0_CH3_INVERTED 0
#endif
PWM_NRFX_DEVICE(0);
#endif

#ifdef CONFIG_PWM_1
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH0_PIN
#define DT_NORDIC_NRF_PWM_PWM_1_CH0_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH0_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_1_CH0_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH1_PIN
#define DT_NORDIC_NRF_PWM_PWM_1_CH1_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH1_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_1_CH1_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH2_PIN
#define DT_NORDIC_NRF_PWM_PWM_1_CH2_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH2_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_1_CH2_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH3_PIN
#define DT_NORDIC_NRF_PWM_PWM_1_CH3_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_1_CH3_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_1_CH3_INVERTED 0
#endif
PWM_NRFX_DEVICE(1);
#endif

#ifdef CONFIG_PWM_2
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH0_PIN
#define DT_NORDIC_NRF_PWM_PWM_2_CH0_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH0_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_2_CH0_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH1_PIN
#define DT_NORDIC_NRF_PWM_PWM_2_CH1_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH1_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_2_CH1_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH2_PIN
#define DT_NORDIC_NRF_PWM_PWM_2_CH2_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH2_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_2_CH2_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH3_PIN
#define DT_NORDIC_NRF_PWM_PWM_2_CH3_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_2_CH3_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_2_CH3_INVERTED 0
#endif
PWM_NRFX_DEVICE(2);
#endif

#ifdef CONFIG_PWM_3
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH0_PIN
#define DT_NORDIC_NRF_PWM_PWM_3_CH0_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH0_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_3_CH0_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH1_PIN
#define DT_NORDIC_NRF_PWM_PWM_3_CH1_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH1_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_3_CH1_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH2_PIN
#define DT_NORDIC_NRF_PWM_PWM_3_CH2_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH2_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_3_CH2_INVERTED 0
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH3_PIN
#define DT_NORDIC_NRF_PWM_PWM_3_CH3_PIN NRFX_PWM_PIN_NOT_USED
#endif
#ifndef DT_NORDIC_NRF_PWM_PWM_3_CH3_INVERTED
#define DT_NORDIC_NRF_PWM_PWM_3_CH3_INVERTED 0
#endif
PWM_NRFX_DEVICE(3);
#endif