/*
 * Copyright (c) 2017 Linaro Limited
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <st/f4/stm32f405-pinctrl.dtsi>
#include <st/f4/stm32f401.dtsi>

/ {
	soc {
		pinctrl: pin-controller@40020000 {
			reg = <0x40020000 0x2400>;

			gpiof: gpio@40021400 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40021400 0x400>;
				clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000020>;
				label = "GPIOF";
			};

			gpiog: gpio@40021800 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40021800 0x400>;
				clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000040>;
				label = "GPIOG";
			};

			gpioi: gpio@40022000 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40022000 0x400>;
				clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000100>;
				label = "GPIOI";
			};
		};

		usart3: serial@40004800 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40004800 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>;
			interrupts = <39 0>;
			status = "disabled";
			label = "UART_3";
		};

		uart4: serial@40004c00 {
			compatible ="st,stm32-uart";
			reg = <0x40004c00 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>;
			interrupts = <52 0>;
			status = "disabled";
			label = "UART_4";
		};

		uart5: serial@40005000 {
			compatible = "st,stm32-uart";
			reg = <0x40005000 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>;
			interrupts = <53 0>;
			status = "disabled";
			label = "UART_5";
		};

		timers6: timers@40001000 {
			compatible = "st,stm32-timers";
			reg = <0x40001000 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000010>;
			status = "disabled";
			label = "TIMERS_6";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				st,prescaler = <10000>;
				label = "PWM_6";
				#pwm-cells = <2>;
			};
		};

		timers7: timers@40001400 {
			compatible = "st,stm32-timers";
			reg = <0x40001400 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000020>;
			status = "disabled";
			label = "TIMERS_7";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				st,prescaler = <10000>;
				label = "PWM_7";
				#pwm-cells = <2>;
			};
		};

		timers8: timers@40010400 {
			compatible = "st,stm32-timers";
			reg = <0x40010400 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000002>;
			status = "disabled";
			label = "TIMERS_8";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				st,prescaler = <10000>;
				label = "PWM_8";
				#pwm-cells = <2>;
			};
		};

		timers12: timers@40001800 {
			compatible = "st,stm32-timers";
			reg = <0x40001800 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000040>;
			status = "disabled";
			label = "TIMERS_12";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				st,prescaler = <10000>;
				label = "PWM_12";
				#pwm-cells = <2>;
			};
		};

		timers13: timers@40001c00 {
			compatible = "st,stm32-timers";
			reg = <0x40001c00 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000080>;
			status = "disabled";
			label = "TIMERS_13";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				st,prescaler = <10000>;
				label = "PWM_13";
				#pwm-cells = <2>;
			};
		};

		timers14: timers@40002000 {
			compatible = "st,stm32-timers";
			reg = <0x40002000 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000100>;
			status = "disabled";
			label = "TIMERS_14";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				st,prescaler = <10000>;
				label = "PWM_14";
				#pwm-cells = <2>;
			};
		};

		usbotg_hs: usb@40040000 {
			compatible = "st,stm32-otghs", "st,stm32-otgfs";
			reg = <0x40040000 0x40000>;
			interrupts = <77 0>, <74 0>, <75 0>;
			interrupt-names = "otghs", "ep1_out", "ep1_in";
			num-bidir-endpoints = <6>;
			ram-size = <4096>;
			maximum-speed = "full-speed";
			phys = <&otghs_fs_phy>;
			status = "disabled";
			label= "OTGHS";
		};
	};

	otghs_fs_phy: otghs_fs_phy {
		compatible = "usb-nop-xceiv";
		#phy-cells = <0>;
		label = "OTGHS_FS_PHY";
	};
};