| .. zephyr:board:: stm32c0116_dk |
| |
| Overview |
| ******** |
| |
| The STM32C0116-DK Discovery kit helps to discover features of the STM32C0 Series |
| microcontroller in a UFQFPN20 package. This Discovery kit features one UFQFPN20 |
| to DIL20 module designed with the STM32C011F6 microcontroller and allows the user to develop |
| and share applications. It includes an on-board ST-LINK/V2-1 to debug and program the embedded |
| STM32 microcontroller. Important board features include: |
| |
| More information about the board can be found at the `STM32C0116-DK website`_. |
| |
| Hardware |
| ******** |
| |
| The STM32C0116-DK Discovery kit provides the following hardware components: |
| |
| - STM32C011F6 microcontroller with 32 Kbytes of Flash memory and 6 Kbytes of RAM, in a UFQFPN20 package |
| - On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage and debug port |
| - User LED |
| - Reset push-button |
| - 5 way joystick using a single ADC input pin |
| - Individual STM32 UFQFPN20 to DIL20 module |
| - Board connectors: |
| |
| - USB Micro-B |
| - DIL20 socket |
| - Dedicated LCD footprint |
| - Grove (UART) |
| - 2 x 10 pin headers for MCU daughterboard |
| - Extension connectors |
| |
| More information about STM32C011F6 can be found here: |
| |
| - `STM32C011F6 on www.st.com`_ |
| - `STM32C0x1 reference manual`_ |
| |
| Supported Features |
| ================== |
| |
| .. zephyr:board-supported-hw:: |
| |
| Pin Mapping |
| =========== |
| |
| STM32C0116-DK Discovery kit has 4 GPIO controllers. These controllers are responsible for pin muxing, |
| input/output, pull-up, etc. |
| |
| For more details please refer to `STM32C0116-DK board User Manual`_. |
| |
| Default Zephyr Peripheral Mapping: |
| ---------------------------------- |
| |
| The STM32C0116 Discovery board is configured as follows: |
| |
| - UART_2 TX/RX : PA2/PA3 |
| - UART_1 TX/RX : PA9/PA10 (ST-Link Virtual Port Com) |
| - PWM_1_CH3 : PB6 |
| - ADC1_CH8 : PA8 |
| - LD3 : PB6 |
| |
| Programming and Debugging |
| ************************* |
| |
| STM32C0116-DK Discovery kit includes an ST-LINK/V2 embedded debug tool interface. |
| |
| Applications for the ``stm32c0116_dk`` board configuration can be built and |
| flashed in the usual way (see :ref:`build_an_application` and |
| :ref:`application_run` for more details). |
| |
| Flashing |
| ======== |
| |
| The board is configured to be flashed using west `STM32CubeProgrammer`_ runner, |
| so its :ref:`installation <stm32cubeprog-flash-host-tools>` is required. |
| |
| Alternatively, JLink can also be used to flash the board using |
| the ``--runner`` (or ``-r``) option: |
| |
| .. code-block:: console |
| |
| $ west flash --runner jlink |
| |
| Flashing an application to STM32C0116-DK |
| ------------------------------------------- |
| |
| First, connect the STM32C0116 Discovery kit to your host computer using |
| the USB port to prepare it for flashing. Then build and flash your application. |
| |
| Here is an example for the :zephyr:code-sample:`hello_world` application. |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/hello_world |
| :board: stm32c0116_dk |
| :goals: build flash |
| |
| Run a serial host program to connect with your board: |
| |
| .. code-block:: console |
| |
| $ minicom -D /dev/ttyACM0 |
| |
| You should see the following message on the console: |
| |
| .. code-block:: console |
| |
| Hello World! arm |
| |
| |
| .. _STM32C0116-DK website: |
| https://www.st.com/en/evaluation-tools/stm32c0116-dk.html |
| |
| .. _STM32C0116-DK board User Manual: |
| https://www.st.com/resource/en/user_manual/um2970-discovery-kit-with-stm32c011f6-mcu-stmicroelectronics.pdf |
| |
| .. _STM32C011F6 on www.st.com: |
| https://www.st.com/resource/en/datasheet/stm32c011f6.pdf |
| |
| .. _STM32C0x1 reference manual: |
| https://www.st.com/resource/en/reference_manual/rm0490-stm32c0x1-advanced-armbased-64bit-mcus-stmicroelectronics.pdf |
| |
| .. _STM32CubeProgrammer: |
| https://www.st.com/en/development-tools/stm32cubeprog.html |
