/***************************************************************************//**
 * @file
 * @brief Real Time Counter (RTCC) peripheral API.
 * @version 5.1.2
 *******************************************************************************
 * @section License
 * <b>Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com</b>
 *******************************************************************************
 *
 * Permission is granted to anyone to use this software for any purpose,
 * including commercial applications, and to alter it and redistribute it
 * freely, subject to the following restrictions:
 *
 * 1. The origin of this software must not be misrepresented; you must not
 *    claim that you wrote the original software.
 * 2. Altered source versions must be plainly marked as such, and must not be
 *    misrepresented as being the original software.
 * 3. This notice may not be removed or altered from any source distribution.
 *
 * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no
 * obligation to support this Software. Silicon Labs is providing the
 * Software "AS IS", with no express or implied warranties of any kind,
 * including, but not limited to, any implied warranties of merchantability
 * or fitness for any particular purpose or warranties against infringement
 * of any proprietary rights of a third party.
 *
 * Silicon Labs will not be liable for any consequential, incidental, or
 * special damages, or any other relief, or for any claim by any third party,
 * arising from your use of this Software.
 *
 ******************************************************************************/

#ifndef EM_RTCC_H
#define EM_RTCC_H

#include "em_device.h"
#if defined( RTCC_COUNT ) && ( RTCC_COUNT == 1 )

#include <stdbool.h>
#include "em_assert.h"

#ifdef __cplusplus
extern "C" {
#endif

/***************************************************************************//**
 * @addtogroup emlib
 * @{
 ******************************************************************************/

/***************************************************************************//**
 * @addtogroup RTCC
 * @{
 ******************************************************************************/

/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */
#if defined(_SILICON_LABS_GECKO_INTERNAL_SDID_84)    \
    || defined(_SILICON_LABS_GECKO_INTERNAL_SDID_89)
/* Enable fix for errata "RTCC_E203 - Potential Stability Issue with RTCC
 * Registers". */
#define ERRATA_FIX_RTCC_E203
#endif

#if defined(_SILICON_LABS_GECKO_INTERNAL_SDID_84)
/* Enable fix for errata "RTCC_E204 - Disabling the RTCC Backup RAM may consume extra
 * current". */
#define ERRATA_FIX_RTCC_E204
#endif
/** @endcond */

/*******************************************************************************
 *********************************   ENUM   ************************************
 ******************************************************************************/

/** Operational mode of the counter. */
typedef enum
{
  /** Normal counter mode. The counter is incremented by 1 for each tick. */
  rtccCntModeNormal = _RTCC_CTRL_CNTTICK_PRESC,

  /** Calendar mode. Refer to the RTCC chapter of the Reference Manual for more
   *  details on the calendar mode. */
  rtccCntModeCalendar = _RTCC_CTRL_CNTTICK_CCV0MATCH
} RTCC_CntMode_TypeDef;

/** Counter prescaler selection. */
typedef enum
{
  rtccCntPresc_1     = _RTCC_CTRL_CNTPRESC_DIV1,      /**< Divide clock by 1. */
  rtccCntPresc_2     = _RTCC_CTRL_CNTPRESC_DIV2,      /**< Divide clock by 2. */
  rtccCntPresc_4     = _RTCC_CTRL_CNTPRESC_DIV4,      /**< Divide clock by 4. */
  rtccCntPresc_8     = _RTCC_CTRL_CNTPRESC_DIV8,      /**< Divide clock by 8. */
  rtccCntPresc_16    = _RTCC_CTRL_CNTPRESC_DIV16,     /**< Divide clock by 16. */
  rtccCntPresc_32    = _RTCC_CTRL_CNTPRESC_DIV32,     /**< Divide clock by 32. */
  rtccCntPresc_64    = _RTCC_CTRL_CNTPRESC_DIV64,     /**< Divide clock by 64. */
  rtccCntPresc_128   = _RTCC_CTRL_CNTPRESC_DIV128,    /**< Divide clock by 128. */
  rtccCntPresc_256   = _RTCC_CTRL_CNTPRESC_DIV256,    /**< Divide clock by 256. */
  rtccCntPresc_512   = _RTCC_CTRL_CNTPRESC_DIV512,    /**< Divide clock by 512. */
  rtccCntPresc_1024  = _RTCC_CTRL_CNTPRESC_DIV1024,   /**< Divide clock by 1024. */
  rtccCntPresc_2048  = _RTCC_CTRL_CNTPRESC_DIV2048,   /**< Divide clock by 2048. */
  rtccCntPresc_4096  = _RTCC_CTRL_CNTPRESC_DIV4096,   /**< Divide clock by 4096. */
  rtccCntPresc_8192  = _RTCC_CTRL_CNTPRESC_DIV8192,   /**< Divide clock by 8192. */
  rtccCntPresc_16384 = _RTCC_CTRL_CNTPRESC_DIV16384,  /**< Divide clock by 16384. */
  rtccCntPresc_32768 = _RTCC_CTRL_CNTPRESC_DIV32768   /**< Divide clock by 32768. */
} RTCC_CntPresc_TypeDef;


/** Prescaler mode of the RTCC counter. */
typedef enum
{
  /** CNT register ticks according to the prescaler value. */
  rtccCntTickPresc = _RTCC_CTRL_CNTTICK_PRESC,

  /** CNT register ticks when PRECNT matches the 15 least significant bits of
   *  ch. 0 CCV register. */
  rtccCntTickCCV0Match = _RTCC_CTRL_CNTTICK_CCV0MATCH
} RTCC_PrescMode_TypeDef;


/** Capture/Compare channel mode. */
typedef enum
{
  rtccCapComChModeOff     = _RTCC_CC_CTRL_MODE_OFF,           /**< Capture/Compare channel turned off. */
  rtccCapComChModeCapture = _RTCC_CC_CTRL_MODE_INPUTCAPTURE,  /**< Capture mode. */
  rtccCapComChModeCompare = _RTCC_CC_CTRL_MODE_OUTPUTCOMPARE, /**< Compare mode. */
} RTCC_CapComChMode_TypeDef;

/** Compare match output action mode. */
typedef enum
{
  rtccCompMatchOutActionPulse  = _RTCC_CC_CTRL_CMOA_PULSE,  /**< Generate a pulse. */
  rtccCompMatchOutActionToggle = _RTCC_CC_CTRL_CMOA_TOGGLE, /**< Toggle output. */
  rtccCompMatchOutActionClear  = _RTCC_CC_CTRL_CMOA_CLEAR,  /**< Clear output. */
  rtccCompMatchOutActionSet    = _RTCC_CC_CTRL_CMOA_SET     /**< Set output. */
} RTCC_CompMatchOutAction_TypeDef;


/** PRS input sources. */
typedef enum
{
  rtccPRSCh0 = _RTCC_CC_CTRL_PRSSEL_PRSCH0,   /**< PRS channel 0. */
  rtccPRSCh1 = _RTCC_CC_CTRL_PRSSEL_PRSCH1,   /**< PRS channel 1. */
  rtccPRSCh2 = _RTCC_CC_CTRL_PRSSEL_PRSCH2,   /**< PRS channel 2. */
  rtccPRSCh3 = _RTCC_CC_CTRL_PRSSEL_PRSCH3,   /**< PRS channel 3. */
  rtccPRSCh4 = _RTCC_CC_CTRL_PRSSEL_PRSCH4,   /**< PRS channel 4. */
  rtccPRSCh5 = _RTCC_CC_CTRL_PRSSEL_PRSCH5,   /**< PRS channel 5. */
  rtccPRSCh6 = _RTCC_CC_CTRL_PRSSEL_PRSCH6,   /**< PRS channel 6. */
  rtccPRSCh7 = _RTCC_CC_CTRL_PRSSEL_PRSCH7,   /**< PRS channel 7. */
  rtccPRSCh8 = _RTCC_CC_CTRL_PRSSEL_PRSCH8,   /**< PRS channel 8. */
  rtccPRSCh9 = _RTCC_CC_CTRL_PRSSEL_PRSCH9,   /**< PRS channel 9. */
  rtccPRSCh10 = _RTCC_CC_CTRL_PRSSEL_PRSCH10, /**< PRS channel 10. */
  rtccPRSCh11 = _RTCC_CC_CTRL_PRSSEL_PRSCH11  /**< PRS channel 11. */
} RTCC_PRSSel_TypeDef;


/** Input edge select. */
typedef enum
{
  rtccInEdgeRising  = _RTCC_CC_CTRL_ICEDGE_RISING,  /**< Rising edges detected. */
  rtccInEdgeFalling = _RTCC_CC_CTRL_ICEDGE_FALLING, /**< Falling edges detected. */
  rtccInEdgeBoth    = _RTCC_CC_CTRL_ICEDGE_BOTH,    /**< Both edges detected. */
  rtccInEdgeNone    = _RTCC_CC_CTRL_ICEDGE_NONE     /**< No edge detection, signal is left as is. */
} RTCC_InEdgeSel_TypeDef;


/** Capture/Compare channel compare mode. */
typedef enum
{
  /** CCVx is compared with the CNT register. */
  rtccCompBaseCnt = _RTCC_CC_CTRL_COMPBASE_CNT,

  /** CCVx is compared with a CNT[16:0] and PRECNT[14:0]. */
  rtccCompBasePreCnt = _RTCC_CC_CTRL_COMPBASE_PRECNT
} RTCC_CompBase_TypeDef;

  /** Day compare mode. */
typedef enum
{
  rtccDayCompareModeMonth = _RTCC_CC_CTRL_DAYCC_MONTH,  /**< Day of month is selected for Capture/Compare. */
  rtccDayCompareModeWeek  = _RTCC_CC_CTRL_DAYCC_WEEK    /**< Day of week is selected for Capture/Compare. */
} RTCC_DayCompareMode_TypeDef;

/*******************************************************************************
 *******************************   STRUCTS   ***********************************
 ******************************************************************************/

/** RTCC initialization structure. */
typedef struct
{
  /** Enable/disable counting when initialization is completed. */
  bool                   enable;

  /** Enable/disable timer counting during debug halt. */
  bool                   debugRun;

  /** Enable/disable precounter wrap on ch. 0 CCV value. */
  bool                   precntWrapOnCCV0;

  /** Enable/disable counter wrap on ch. 1 CCV value. */
  bool                   cntWrapOnCCV1;

  /** Counter prescaler. */
  RTCC_CntPresc_TypeDef  presc;

  /** Prescaler mode. */
  RTCC_PrescMode_TypeDef prescMode;

#if defined(_RTCC_CTRL_BUMODETSEN_MASK)
  /** Enable/disable storing RTCC counter value in RTCC_CCV2 upon backup mode
   *  entry. */
  bool                   enaBackupModeSet;
#endif

  /** Enable/disable the check that sets the OSCFFAIL interrupt flag if no
   *  LFCLK-RTCC ticks are detected within one ULFRCO cycles. */
  bool                   enaOSCFailDetect;

  /** Select the operational mode of the counter. */
  RTCC_CntMode_TypeDef   cntMode;

  /** Disable leap year correction for the calendar mode. When this parameter is
   *  set to false, February has 29 days if (year % 4 == 0). If true, February
   *  always has 28 days. */
  bool                   disLeapYearCorr;
} RTCC_Init_TypeDef;


/** RTCC capture/compare channel configuration structure. */
typedef struct
{
  /** Select the mode of the Capture/Compare channel. */
  RTCC_CapComChMode_TypeDef        chMode;

  /** Compare mode channel match output action. */
  RTCC_CompMatchOutAction_TypeDef  compMatchOutAction;

  /** Capture mode channel PRS input channel selection. */
  RTCC_PRSSel_TypeDef              prsSel;

  /** Capture mode channel input edge selection. */
  RTCC_InEdgeSel_TypeDef           inputEdgeSel;

  /** Comparison base of the channel in compare mode. */
  RTCC_CompBase_TypeDef            compBase;

  /** The COMPMASK (5 bit) most significant bits of the compare value will not
   *  be subject to comparison.  */
  uint8_t                          compMask;

  /** Day compare mode. */
  RTCC_DayCompareMode_TypeDef      dayCompMode;
} RTCC_CCChConf_TypeDef;


/*******************************************************************************
 *******************************   DEFINES   ***********************************
 ******************************************************************************/

/** Default RTCC init structure. */
#if defined(_RTCC_CTRL_BUMODETSEN_MASK)
#define RTCC_INIT_DEFAULT                                                   \
{                                                                           \
  true,     /* Start counting when init done.                           */  \
  false,    /* Disable RTCC during debug halt.                          */  \
  false,    /* Disable precounter wrap on ch. 0 CCV value.              */  \
  false,    /* Disable counter wrap on ch. 1 CCV value.                 */  \
  rtccCntPresc_32, /* 977 us per tick.                                  */  \
  rtccCntTickPresc, /* Counter increments according to prescaler value. */  \
  false,    /* No RTCC storage on backup mode entry.                    */  \
  false,    /* No RTCC oscillator failure detection.                    */  \
  rtccCntModeNormal, /* Normal RTCC mode.                               */  \
  false,    /* No leap year correction.                                 */  \
}
#else
#define RTCC_INIT_DEFAULT                                                   \
{                                                                           \
  true,     /* Start counting when init done.                           */  \
  false,    /* Disable RTCC during debug halt.                          */  \
  false,    /* Disable precounter wrap on ch. 0 CCV value.              */  \
  false,    /* Disable counter wrap on ch. 1 CCV value.                 */  \
  rtccCntPresc_32, /* 977 us per tick.                                  */  \
  rtccCntTickPresc, /* Counter increments according to prescaler value. */  \
  false,    /* No RTCC oscillator failure detection.                    */  \
  rtccCntModeNormal, /* Normal RTCC mode.                               */  \
  false,    /* No leap year correction.                                 */  \
}
#endif

/** Default RTCC channel output compare init structure. */
#define RTCC_CH_INIT_COMPARE_DEFAULT                                        \
{                                                                           \
  rtccCapComChModeCompare,     /* Select output compare mode.     */        \
  rtccCompMatchOutActionPulse, /* Create pulse on compare match.  */        \
  rtccPRSCh0,                  /* PRS channel 0 (not used).       */        \
  rtccInEdgeNone,              /* No edge detection.              */        \
  rtccCompBaseCnt,             /* Counter comparison base.        */        \
  0,                           /* No compare mask bits set.       */        \
  rtccDayCompareModeMonth      /* Don't care */                             \
}

/** Default RTCC channel input capture init structure. */
#define RTCC_CH_INIT_CAPTURE_DEFAULT                                        \
{                                                                           \
  rtccCapComChModeCapture,     /* Select input capture mode.      */        \
  rtccCompMatchOutActionPulse, /* Create pulse on capture.        */        \
  rtccPRSCh0,                  /* PRS channel 0.                  */        \
  rtccInEdgeRising,            /* Rising edge detection.          */        \
  rtccCompBaseCnt,             /* Don't care.                     */        \
  0,                           /* Don't care.                     */        \
  rtccDayCompareModeMonth      /* Don't care                      */        \
}

/** Validation of valid RTCC channel for assert statements. */
#define RTCC_CH_VALID( ch )    ( ( ch ) < 3 )

/*******************************************************************************
 *****************************   PROTOTYPES   **********************************
 ******************************************************************************/

/***************************************************************************//**
 * @brief
 *   Get RTCC capture/compare register value (CCV) for selected channel.
 *
 * @param[in] ch
 *   Channel selector.
 *
 * @return
 *   Capture/compare register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_ChannelCCVGet( int ch )
{
  EFM_ASSERT( RTCC_CH_VALID( ch ) );
  return RTCC->CC[ ch ].CCV;
}

/***************************************************************************//**
 * @brief
 *   Set RTCC capture/compare register value (CCV) for selected channel.
 *
 * @param[in] ch
 *   Channel selector.
 *
 * @param[in] value
 *   CCV value.
 ******************************************************************************/
__STATIC_INLINE void RTCC_ChannelCCVSet( int ch, uint32_t value )
{
  EFM_ASSERT( RTCC_CH_VALID( ch ) );
  RTCC->CC[ ch ].CCV = value;
}

/***************************************************************************//**
 * @brief
 *   Get the calendar DATE register content for selected channel.
 *
 * @param[in] ch
 *   Channel selector.
 *
 * @return
 *   DATE register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_ChannelDateGet( int ch )
{
  EFM_ASSERT( RTCC_CH_VALID( ch ) );
  return RTCC->CC[ ch ].DATE;
}

/***************************************************************************//**
 * @brief
 *   Set the calendar DATE register for selected channel.
 *
 * @param[in] ch
 *   Channel selector.
 *
 * @param[in] date
 *   DATE value.
 ******************************************************************************/
__STATIC_INLINE void RTCC_ChannelDateSet( int ch, uint32_t date )
{
  EFM_ASSERT( RTCC_CH_VALID( ch ) );
  RTCC->CC[ ch ].DATE = date;
}

void RTCC_ChannelInit( int ch, RTCC_CCChConf_TypeDef const *confPtr );

/***************************************************************************//**
 * @brief
 *   Get the calendar TIME register content for selected channel.
 *
 * @param[in] ch
 *   Channel selector.
 *
 * @return
 *   TIME register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_ChannelTimeGet( int ch )
{
  EFM_ASSERT( RTCC_CH_VALID( ch ) );
  return RTCC->CC[ ch ].TIME;
}

/***************************************************************************//**
 * @brief
 *   Set the calendar TIME register for selected channel.
 *
 * @param[in] ch
 *   Channel selector.
 *
 * @param[in] time
 *   TIME value.
 ******************************************************************************/
__STATIC_INLINE void RTCC_ChannelTimeSet( int ch, uint32_t time )
{
  EFM_ASSERT( RTCC_CH_VALID( ch ) );
  RTCC->CC[ ch ].TIME = time;
}

/***************************************************************************//**
 * @brief
 *   Get the combined CNT/PRECNT register content.
 *
 * @return
 *   CNT/PRECNT register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_CombinedCounterGet( void )
{
  return RTCC->COMBCNT;
}

/***************************************************************************//**
 * @brief
 *   Get RTCC counter value.
 *
 * @return
 *   Current RTCC counter value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_CounterGet( void )
{
  return RTCC->CNT;
}

/***************************************************************************//**
 * @brief
 *   Set RTCC CNT counter.
 *
 * @param[in] value
 *   CNT value.
 ******************************************************************************/
__STATIC_INLINE void RTCC_CounterSet( uint32_t value )
{
  RTCC->CNT = value;
}

/***************************************************************************//**
 * @brief
 *   Get DATE register value.
 *
 * @return
 *   Current DATE register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_DateGet( void )
{
  return RTCC->DATE;
}

/***************************************************************************//**
 * @brief
 *   Set RTCC DATE register.
 *
 * @param[in] date
 *   DATE value.
 ******************************************************************************/
__STATIC_INLINE void RTCC_DateSet( uint32_t date )
{
  RTCC->DATE = date;
}

/***************************************************************************//**
 * @brief
 *   Enable/disable EM4 wakeup capability.
 *
 * @param[in] enable
 *   True to enable EM4 wakeup, false to disable.
 ******************************************************************************/
__STATIC_INLINE void RTCC_EM4WakeupEnable( bool enable )
{
  if ( enable )
  {
    RTCC->EM4WUEN = RTCC_EM4WUEN_EM4WU;
  }
  else
  {
    RTCC->EM4WUEN = 0;
  }
}

void RTCC_Enable( bool enable );

void RTCC_Init( const RTCC_Init_TypeDef *init );

/***************************************************************************//**
 * @brief
 *   Clear one or more pending RTCC interrupts.
 *
 * @param[in] flags
 *   RTCC interrupt sources to clear. Use a set of interrupt flags OR-ed
 *   together to clear multiple interrupt sources.
 ******************************************************************************/
__STATIC_INLINE void RTCC_IntClear( uint32_t flags )
{
  RTCC->IFC = flags;
}

/***************************************************************************//**
 * @brief
 *   Disable one or more RTCC interrupts.
 *
 * @param[in] flags
 *   RTCC interrupt sources to disable. Use a set of interrupt flags OR-ed
 *   together to disable multiple interrupt.
 ******************************************************************************/
__STATIC_INLINE void RTCC_IntDisable( uint32_t flags )
{
  RTCC->IEN &= ~flags;
}

/***************************************************************************//**
 * @brief
 *   Enable one or more RTCC interrupts.
 *
 * @note
 *   Depending on the use, a pending interrupt may already be set prior to
 *   enabling the interrupt. Consider using RTCC_IntClear() prior to enabling
 *   if such a pending interrupt should be ignored.
 *
 * @param[in] flags
 *   RTCC interrupt sources to enable. Use a set of interrupt flags OR-ed
 *   together to set multiple interrupt.
 ******************************************************************************/
__STATIC_INLINE void RTCC_IntEnable( uint32_t flags )
{
  RTCC->IEN |= flags;
}

/***************************************************************************//**
 * @brief
 *   Get pending RTCC interrupt flags.
 *
 * @note
 *   The event bits are not cleared by the use of this function.
 *
 * @return
 *   Pending RTCC interrupt sources. Returns a set of interrupt flags OR-ed
 *   together for the interrupt sources set.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_IntGet( void )
{
  return RTCC->IF;
}

/***************************************************************************//**
 * @brief
 *   Get enabled and pending RTCC interrupt flags.
 *
 * @details
 *   Useful for handling more interrupt sources in the same interrupt handler.
 *
 * @return
 *   Pending and enabled RTCC interrupt sources. Returns a set of interrupt
 *   flags OR-ed together for the interrupt sources set.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_IntGetEnabled( void )
{
  uint32_t tmp;

  tmp = RTCC->IEN;

  /* Bitwise AND of pending and enabled interrupt flags. */
  return RTCC->IF & tmp;
}

/***************************************************************************//**
 * @brief
 *   Set one or more pending RTCC interrupts from SW.
 *
 * @param[in] flags
 *   RTCC interrupt sources to set to pending. Use a set of interrupt flags
 *   (RTCC_IFS_nnn).
 ******************************************************************************/
__STATIC_INLINE void RTCC_IntSet( uint32_t flags )
{
  RTCC->IFS = flags;
}

/***************************************************************************//**
 * @brief
 *   Lock RTCC registers.
 *
 * @note
 *   When RTCC registers are locked, RTCC_CTRL, RTCC_PRECNT, RTCC_CNT,
 *   RTCC_TIME, RTCC_DATE, RTCC_IEN, RTCC_POWERDOWN and RTCC_CCx_XXX registers
 *   can not be written to.
 ******************************************************************************/
__STATIC_INLINE void RTCC_Lock( void )
{
#if defined(ERRATA_FIX_RTCC_E203)
  /* RTCC_E203 - Potential Stability Issue with RTCC Registers
   * RTCC_LOCK register must be modified while RTCC clock is disabled. */
  uint32_t lfeReg = CMU->LFECLKEN0;
  bool cmuLocked = (CMU->LOCK == CMU_LOCK_LOCKKEY_LOCKED);
  if (cmuLocked)
  {
    CMU->LOCK = CMU_LOCK_LOCKKEY_UNLOCK;
  }
  CMU->LFECLKEN0 = 0x0;
#endif
  RTCC->LOCK = RTCC_LOCK_LOCKKEY_LOCK;
#if defined(ERRATA_FIX_RTCC_E203)
  /* Restore clock state after RTCC_E203 fix. */
  CMU->LFECLKEN0 = lfeReg;
  if (cmuLocked)
  {
    CMU->LOCK = CMU_LOCK_LOCKKEY_LOCK;
  }
#endif
}

/***************************************************************************//**
 * @brief
 *   Get RTCC pre-counter value.
 *
 * @return
 *   Current RTCC pre-counter value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_PreCounterGet( void )
{
  return RTCC->PRECNT;
}

/***************************************************************************//**
 * @brief
 *   Set RTCC pre-counter value.
 *
 * @param[in] preCntVal
 *   RTCC pre-counter value to be set.
 ******************************************************************************/
__STATIC_INLINE void RTCC_PreCounterSet( uint32_t preCntVal )
{
  RTCC->PRECNT = preCntVal;
}

void RTCC_Reset( void );

/***************************************************************************//**
 * @brief
 *   Power down the retention ram.
 *
 * @note
 *   Once retention ram is powered down, it cannot be powered up again.
 ******************************************************************************/
__STATIC_INLINE void RTCC_RetentionRamPowerDown( void )
{
#if !defined(ERRATA_FIX_RTCC_E204)
  /* Devices that are affected by RTCC_E204 should always keep the RTCC
   * backup RAM retained. */
  RTCC->POWERDOWN = RTCC_POWERDOWN_RAM;
#endif
}

void RTCC_StatusClear( void );

/***************************************************************************//**
 * @brief
 *   Get STATUS register value.
 *
 * @return
 *   Current STATUS register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_StatusGet( void )
{
  while ( RTCC->SYNCBUSY & RTCC_SYNCBUSY_CMD )
  {
    // Wait for syncronization.
  }
  return RTCC->STATUS;
}

/***************************************************************************//**
 * @brief
 *   Get TIME register value.
 *
 * @return
 *   Current TIME register value.
 ******************************************************************************/
__STATIC_INLINE uint32_t RTCC_TimeGet( void )
{
  return RTCC->TIME;
}

/***************************************************************************//**
 * @brief
 *   Set RTCC TIME register.
 *
 * @param[in] time
 *   TIME value.
 ******************************************************************************/
__STATIC_INLINE void RTCC_TimeSet( uint32_t time )
{
  RTCC->TIME = time;
}

/***************************************************************************//**
 * @brief
 *   Unlock RTCC registers.
 *
 * @note
 *   When RTCC registers are locked, RTCC_CTRL, RTCC_PRECNT, RTCC_CNT,
 *   RTCC_TIME, RTCC_DATE, RTCC_IEN, RTCC_POWERDOWN and RTCC_CCx_XXX registers
 *   can not be written to.
 ******************************************************************************/
__STATIC_INLINE void RTCC_Unlock( void )
{
#if defined(ERRATA_FIX_RTCC_E203)
  /* RTCC_E203 - Potential Stability Issue with RTCC Registers
   * RTCC_LOCK register must be modified while RTCC clock is disabled. */
  uint32_t lfeReg = CMU->LFECLKEN0;
  bool cmuLocked = (CMU->LOCK == CMU_LOCK_LOCKKEY_LOCKED);
  if (cmuLocked)
  {
    CMU->LOCK = CMU_LOCK_LOCKKEY_UNLOCK;
  }
  CMU->LFECLKEN0 = 0x0;
#endif
  RTCC->LOCK = RTCC_LOCK_LOCKKEY_UNLOCK;
#if defined(ERRATA_FIX_RTCC_E203)
  /* Restore clock state after RTCC_E203 fix. */
  CMU->LFECLKEN0 = lfeReg;
  if (cmuLocked)
  {
    CMU->LOCK = CMU_LOCK_LOCKKEY_LOCK;
  }
#endif
}

/** @} (end addtogroup RTCC) */
/** @} (end addtogroup emlib) */

#ifdef __cplusplus
}
#endif

#endif /* defined( RTCC_COUNT ) && ( RTC_COUNT == 1 ) */
#endif /* EM_RTCC_H */