| # Copyright (c) 2017 Intel Corporation |
| # Copyright (c) 2018 Phytec Messtechnik GmbH |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig APDS9960 |
| bool "APDS9960 Sensor" |
| default y |
| depends on DT_HAS_AVAGO_APDS9960_ENABLED |
| depends on I2C |
| help |
| Enable driver for APDS9960 sensors. |
| |
| if APDS9960 |
| |
| choice |
| prompt "Trigger mode" |
| default APDS9960_TRIGGER_NONE |
| help |
| Specify the type of triggering used by the driver. |
| |
| config APDS9960_TRIGGER_NONE |
| bool "No trigger" |
| |
| config APDS9960_TRIGGER_GLOBAL_THREAD |
| bool "Use global thread" |
| depends on GPIO |
| select APDS9960_TRIGGER |
| |
| endchoice |
| |
| config APDS9960_TRIGGER |
| bool |
| |
| config APDS9960_ENABLE_ALS |
| bool "Ambient Light Sense" |
| default y |
| help |
| Enable Ambient Light Sense (ALS). |
| |
| choice |
| prompt "Proximity Gain" |
| default APDS9960_PGAIN_4X |
| |
| config APDS9960_PGAIN_1X |
| bool "1x" |
| |
| config APDS9960_PGAIN_2X |
| bool "2x" |
| |
| config APDS9960_PGAIN_4X |
| bool "4x" |
| |
| config APDS9960_PGAIN_8X |
| bool "8x" |
| |
| endchoice |
| |
| choice |
| prompt "ALS and Color Gain" |
| default APDS9960_AGAIN_4X |
| |
| config APDS9960_AGAIN_1X |
| bool "1x" |
| |
| config APDS9960_AGAIN_4X |
| bool "4x" |
| |
| config APDS9960_AGAIN_16X |
| bool "16x" |
| |
| config APDS9960_AGAIN_64X |
| bool "64x" |
| |
| endchoice |
| |
| choice |
| prompt "Proximity Pulse Length" |
| default APDS9960_PPULSE_LENGTH_8US |
| |
| config APDS9960_PPULSE_LENGTH_4US |
| bool "4us" |
| |
| config APDS9960_PPULSE_LENGTH_8US |
| bool "8us" |
| |
| config APDS9960_PPULSE_LENGTH_16US |
| bool "16us" |
| |
| config APDS9960_PPULSE_LENGTH_32US |
| bool "32us" |
| |
| endchoice |
| |
| choice |
| prompt "Proximity LED boost current" |
| default APDS9960_PLED_BOOST_100PCT |
| |
| config APDS9960_PLED_BOOST_300PCT |
| bool "300%" |
| |
| config APDS9960_PLED_BOOST_200PCT |
| bool "200%" |
| |
| config APDS9960_PLED_BOOST_150PCT |
| bool "150%" |
| |
| config APDS9960_PLED_BOOST_100PCT |
| bool "100%" |
| |
| endchoice |
| |
| config APDS9960_PPULSE_COUNT |
| int "Proximity Pulse Count" |
| range 1 64 |
| default 8 |
| |
| endif # APDS9960 |