#include "skeleton.dtsi"

#include <dt-bindings/i2c/i2c.h>

#define __SIZE_K(x) (x * 1024)

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "snps,arcem4";
			reg = <1>;
		};

		core_intc: arcv2-intc@0 {
			compatible = "snps,arcv2-intc";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	flash0: flash@DT_FLASH_ADDR {
		reg = <DT_FLASH_ADDR DT_FLASH_SIZE>;
	};

	sram0: memory@a8000400 {
		device_type = "memory";
		compatible = "mmio-sram";
		reg = <0xa8000400 DT_SRAM_SIZE>;
	};

	dccm0: dccm@80000000 {
		device_type = "memory";
		compatible = "arc,dccm";
		reg = <0x80000000 DT_DCCM_SIZE>;
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges;

		uart0: uart@b0002000 {
			compatible = "intel,qmsi-uart";
			reg = <0xb0002000 0x400>;
			interrupts = <41 0>;
			interrupt-parent = <&core_intc>;
			label = "UART_0";

			status = "disabled";
		};

		uart1: uart@b0002400 {
			compatible = "intel,qmsi-uart";
			reg = <0xb0002400 0x400>;
			interrupts = <42 0>;
			interrupt-parent = <&core_intc>;
			label = "UART_1";

			status = "disabled";
		};

		i2c0: i2c@80012000 {
			compatible = "intel,qmsi-ss-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x80012000 0x100>;
			interrupts = <22 1>, <25 1>, <24 1>, <23 1>;
			interrupt-names = "error", "stop", "tx", "rx";
			interrupt-parent = <&core_intc>;
			label = "I2C_0";

			status = "disabled";
		};

		i2c1: i2c@80012100 {
			compatible = "intel,qmsi-ss-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x80012100 0x100>;
			interrupts = <26 1>, <29 1>, <28 1>, <27 1>;
			interrupt-names = "error", "stop", "tx", "rx";
			interrupt-parent = <&core_intc>;
			label = "I2C_1";

			status = "disabled";
		};

		i2c2: i2c@b0002800 {
			compatible = "intel,qmsi-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0xb0002800 0x400>;
			interrupts = <36 1>;
			interrupt-parent = <&core_intc>;
			label = "I2C_2";

			status = "disabled";
		};

		i2c3: i2c@b0002c00 {
			compatible = "intel,qmsi-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0xb0002c00 0x400>;
			interrupts = <37 1>;
			interrupt-parent = <&core_intc>;
			label = "I2C_3";

			status = "disabled";
		};
	};
};