# Copyright (c) 2019, Song Qiang <songqiang1304521@gmail.com>
# SPDX-License-Identifier: Apache-2.0

description: |
  STM32 DMA controller (V2)

  It is present on stm32 devices like stm32L4 or stm32WB.
  This DMA controller includes several channels with different requests.
  DMA clients connected to the STM32 DMA controller must use the format
  described in the dma.txt file, using a four-cell specifier for each
  capable of supporting 5 or 6 or 7 or 8 independent DMA channels.
  DMA clients connected to the STM32 DMA controller must use the format
  described in the dma.txt file, using a 3-cell specifier for each
  channel: a phandle to the DMA controller plus the following four integer cells:
    1. channel: the dma stream from 1 to <dma-requests>
    2. slot: DMA periph request ID, which is written in the DMAREQ_ID of the DMAMUX_CxCR
    this value is 0 for Memory-to-memory transfers
    or a value between <1> .. <dma-generators> (not supported yet)
    or a value beweeen <dma-generators>+1  ..  <dma-generators>+<dma-requests>
    3. channel-config: A 32bit mask specifying the DMA channel configuration
    which is device dependent:
        -bit 6-7 : Direction  (see dma.h)
               0x0: MEM to MEM
               0x1: MEM to PERIPH
               0x2: PERIPH to MEM
               0x3: reserved for PERIPH to PERIPH
        -bit 9 : Peripheral Increment Address
               0x0: no address increment between transfers
               0x1: increment address between transfers
        -bit 10 : Memory Increment Address
               0x0: no address increment between transfers
               0x1: increment address between transfers
        -bit 11-12 : Peripheral data size
               0x0: Byte (8 bits)
               0x1: Half-word (16 bits)
               0x2: Word (32 bits)
               0x3: reserved
        -bit 13-14 : Memory data size
               0x0: Byte (8 bits)
               0x1: Half-word (16 bits)
               0x2: Word (32 bits)
               0x3: reserved
        -bit 15: Reserved
        -bit 16-17 : Priority level
               0x0: low
               0x1: medium
               0x2: high
               0x3: very high
  Example of dma node for stm32wb55x
     dma2: dma-controller@40020400 {
         compatible = "st,stm32-dma-v2";
         ...
         dma-requests = <7>;
         status = "disabled";
        };

  For the client part, example for stm32l476 on DMA1 instance
    Tx using channel 3 with request 1
    Rx using channel 2 with request 1
    spi1 {
     compatible = "st,stm32-spi";
     dmas = <&dma1 3 1 0x20440>,
            <&dma1 2 1 0x20480>;
     dma-names = "tx", "rx";
    };

compatible: "st,stm32-dma-v2"

include: st,stm32-dma.yaml

properties:
    "#dma-cells":
      const: 3

# Parameter syntax of stm32 follows the dma client dts syntax
# in the Linux kernel declared in
# https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/plain/Bindings/dma/st,stm32-dma.yaml

dma-cells:
  - channel
  - slot
  - channel-config