CONFIG_IPC_SERVICE=y
CONFIG_MBOX=y

CONFIG_ISR_STACK_SIZE=1024
CONFIG_MAIN_STACK_SIZE=512
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
CONFIG_HEAP_MEM_POOL_SIZE=8192

CONFIG_BT=y
CONFIG_BT_HCI_RAW=y
CONFIG_BT_HCI_RAW_RESERVE=1
CONFIG_BT_MAX_CONN=2

# Workaround: Unable to allocate command buffer when using K_NO_WAIT since
# Host number of completed commands does not follow normal flow control.
CONFIG_BT_BUF_CMD_TX_COUNT=10

CONFIG_BT_BUF_EVT_RX_COUNT=16

CONFIG_BT_BUF_EVT_RX_SIZE=255
CONFIG_BT_BUF_ACL_RX_SIZE=255
CONFIG_BT_BUF_ACL_TX_SIZE=251
CONFIG_BT_BUF_CMD_TX_SIZE=255

# Host features
CONFIG_BT_EXT_ADV=y
CONFIG_BT_PER_ADV=y
CONFIG_BT_PER_ADV_SYNC=y
CONFIG_BT_PER_ADV_SYNC_MAX=2

# Controller
CONFIG_BT_LL_SW_SPLIT=y
CONFIG_BT_CTLR_ASSERT_HANDLER=y
CONFIG_BT_CTLR_DTM_HCI=y

# Rx ACL and Adv Reports
CONFIG_BT_CTLR_RX_BUFFERS=9
CONFIG_BT_CTLR_DATA_LENGTH_MAX=251

# Coded PHY support
CONFIG_BT_CTLR_PHY_CODED=y

# Advertising Sets and Extended Scanning
CONFIG_BT_CTLR_ADV_EXT=y
CONFIG_BT_CTLR_ADV_SET=3
CONFIG_BT_CTLR_ADV_DATA_LEN_MAX=191
CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX=1650

CONFIG_BT_CTLR_ADVANCED_FEATURES=y
CONFIG_BT_CTLR_ADV_AUX_SET=3
CONFIG_BT_CTLR_ADV_AUX_PDU_BACK2BACK=y
CONFIG_BT_CTLR_ADV_SYNC_SET=3
CONFIG_BT_CTLR_ADV_SYNC_PDU_BACK2BACK=y
CONFIG_BT_CTLR_ADV_DATA_BUF_MAX=6

# Increase the below to receive interleaved advertising chains
CONFIG_BT_CTLR_SCAN_AUX_SET=1

CONFIG_BT_CTLR_SCAN_UNRESERVED=y
CONFIG_BT_TICKER_NEXT_SLOT_GET_MATCH=y

# Control Procedure
CONFIG_BT_LL_SW_LLCP=y
CONFIG_BT_CTLR_LLCP_LOCAL_PROC_CTX_BUF_NUM=6

# Direction Finding
CONFIG_BT_CTLR_DF=y
CONFIG_BT_CTLR_DF_PER_ADV_CTE_NUM_MAX=3
CONFIG_BT_CTLR_DF_PER_SCAN_CTE_NUM_MAX=3

# Direction Finding Tx
CONFIG_BT_CTLR_DF_CTE_TX=y
CONFIG_BT_CTLR_DF_CONN_CTE_TX=y
CONFIG_BT_CTLR_DF_ANT_SWITCH_TX=y
CONFIG_BT_CTLR_DF_CONN_CTE_RSP=y

# Direction Finding Rx
CONFIG_BT_CTLR_DF_CTE_RX=y
CONFIG_BT_CTLR_DF_CONN_CTE_RX=y
CONFIG_BT_CTLR_DF_ANT_SWITCH_RX=y
CONFIG_BT_CTLR_DF_CONN_CTE_REQ=y