/*********************************************************************
*                SEGGER Microcontroller GmbH & Co. KG                *
*                        The Embedded Experts                        *
**********************************************************************
*                                                                    *
*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
*                                                                    *
*       www.segger.com     Support: support@segger.com               *
*                                                                    *
**********************************************************************
*                                                                    *
*       SEGGER SystemView * Real-time application analysis           *
*                                                                    *
**********************************************************************
*                                                                    *
* All rights reserved.                                               *
*                                                                    *
* SEGGER strongly recommends to not make any changes                 *
* to or modify the source code of this software in order to stay     *
* compatible with the RTT protocol and J-Link.                       *
*                                                                    *
* Redistribution and use in source and binary forms, with or         *
* without modification, are permitted provided that the following    *
* conditions are met:                                                *
*                                                                    *
* o Redistributions of source code must retain the above copyright   *
*   notice, this list of conditions and the following disclaimer.    *
*                                                                    *
* o Redistributions in binary form must reproduce the above          *
*   copyright notice, this list of conditions and the following      *
*   disclaimer in the documentation and/or other materials provided  *
*   with the distribution.                                           *
*                                                                    *
* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
*   nor the names of its contributors may be used to endorse or      *
*   promote products derived from this software without specific     *
*   prior written permission.                                        *
*                                                                    *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF           *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE           *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR           *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;    *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF      *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT          *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE  *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH   *
* DAMAGE.                                                            *
*                                                                    *
**********************************************************************
*                                                                    *
*       SystemView version: V2.42                                    *
*                                                                    *
**********************************************************************
-------------------------- END-OF-HEADER -----------------------------
File    : SEGGER_SYSVIEW_ConfDefaults.h
Purpose : Defines defaults for configurable defines used in
          SEGGER SystemView.
Revision: $Rev: 3734 $
*/

#ifndef SEGGER_SYSVIEW_CONFDEFAULTS_H
#define SEGGER_SYSVIEW_CONFDEFAULTS_H

/*********************************************************************
*
*       #include Section
*
**********************************************************************
*/

#include "SEGGER_SYSVIEW_Conf.h"
#include "SEGGER_RTT_Conf.h"

#ifdef __cplusplus
extern "C" {
#endif

/*********************************************************************
*
*       Configuration defaults
*
**********************************************************************
*/

// Number of bytes that SystemView uses for a buffer.
#ifndef   SEGGER_SYSVIEW_RTT_BUFFER_SIZE
  #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE    1024
#endif

// The RTT channel that SystemView will use.
#ifndef   SEGGER_SYSVIEW_RTT_CHANNEL
  #define SEGGER_SYSVIEW_RTT_CHANNEL        0
#endif
// Sanity check of RTT channel
#if (SEGGER_SYSVIEW_RTT_CHANNEL == 0) && (SEGGER_RTT_MAX_NUM_UP_BUFFERS < 2)
  #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > 1!"
#elif (SEGGER_SYSVIEW_RTT_CHANNEL >= SEGGER_RTT_MAX_NUM_UP_BUFFERS)
  #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS  in SEGGER_RTT_Conf.h has to be > SEGGER_SYSVIEW_RTT_CHANNEL!"
#endif

// Place the SystemView buffer into its own/the RTT section
#if !(defined SEGGER_SYSVIEW_BUFFER_SECTION) && (defined SEGGER_RTT_SECTION)
  #define SEGGER_SYSVIEW_BUFFER_SECTION            SEGGER_RTT_SECTION
#endif

// Retrieve a system timestamp.  This gets the Cortex-M cycle counter.
#ifndef   SEGGER_SYSVIEW_GET_TIMESTAMP
  #error "SEGGER_SYSVIEW_GET_TIMESTAMP has to be defined in SEGGER_SYSVIEW_Conf.h!"
#endif

// Define number of valid bits low-order delivered by clock source.
#ifndef   SEGGER_SYSVIEW_TIMESTAMP_BITS
  #define SEGGER_SYSVIEW_TIMESTAMP_BITS     32
#endif

// Lowest Id reported by the Application.
#ifndef   SEGGER_SYSVIEW_ID_BASE 
  #define SEGGER_SYSVIEW_ID_BASE            0
#endif

// Number of bits to shift Ids to save bandwidth
#ifndef   SEGGER_SYSVIEW_ID_SHIFT
  #define SEGGER_SYSVIEW_ID_SHIFT           0
#endif

#ifndef   SEGGER_SYSVIEW_GET_INTERRUPT_ID
  #error "SEGGER_SYSVIEW_GET_INTERRUPT_ID has to be defined in SEGGER_SYSVIEW_Conf.h!"
#endif

#ifndef   SEGGER_SYSVIEW_MAX_ARGUMENTS
  #define SEGGER_SYSVIEW_MAX_ARGUMENTS      16
#endif

#ifndef   SEGGER_SYSVIEW_MAX_STRING_LEN
  #define SEGGER_SYSVIEW_MAX_STRING_LEN     128
#endif

// Use a static buffer instead of a buffer on the stack for packets
#ifndef   SEGGER_SYSVIEW_USE_STATIC_BUFFER
  #define SEGGER_SYSVIEW_USE_STATIC_BUFFER  1
#endif

// Maximum packet size used by SystemView for the static buffer
#ifndef   SEGGER_SYSVIEW_MAX_PACKET_SIZE
  #define SEGGER_SYSVIEW_MAX_PACKET_SIZE   SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32
#endif

// Use post-mortem analysis instead of real-time analysis
#ifndef   SEGGER_SYSVIEW_POST_MORTEM_MODE
  #define SEGGER_SYSVIEW_POST_MORTEM_MODE   0
#endif

// Configure how frequently syncronization is sent
#ifndef   SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
  #define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT  8
#endif

// Lock SystemView (nestable)
#ifndef   SEGGER_SYSVIEW_LOCK
  #define SEGGER_SYSVIEW_LOCK()             SEGGER_RTT_LOCK()
#endif

// Unlock SystemView (nestable)
#ifndef   SEGGER_SYSVIEW_UNLOCK
  #define SEGGER_SYSVIEW_UNLOCK()           SEGGER_RTT_UNLOCK()
#endif

#ifdef __cplusplus
}
#endif

#endif

/*************************** End of file ****************************/