# SPDX-License-Identifier: Apache-2.0

CONFIG_SOC_SERIES_STM32L5X=y
CONFIG_SOC_STM32L562XX=y
# 110MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=110000000

# enable uart driver
CONFIG_SERIAL=y

# enable pinmux
CONFIG_PINMUX=y

# enable GPIO
CONFIG_GPIO=y

# clock configuration
CONFIG_CLOCK_CONTROL=y
# SYSCLK selection
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# PLL configuration
CONFIG_CLOCK_STM32_PLL_SRC_MSI=y
CONFIG_CLOCK_STM32_MSI_RANGE=6
# produce 110MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=1
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=55
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=7
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=1
CONFIG_CLOCK_STM32_APB2_PRESCALER=1

# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# Enable MPU
CONFIG_ARM_MPU=y

# Enable HW stack protection
CONFIG_HW_STACK_PROTECTION=y