# Copyright (c) 2018 STMicroelectronics
# SPDX-License-Identifier: Apache-2.0

include: sensor-device.yaml

properties:
  irq-gpios:
    type: phandle-array
    description: |
      The INT1 and (optional) INT2 signal connections.  These signals
      are active-high as produced by the sensor.

  disconnect-sdo-sa0-pull-up:
    type: boolean
    description: |
      Indicates the device driver should disconnect SDO/SA0 pull-up
      during device initialization (e.g. to save current
      leakage). Note that only subset of devices supported by this
      binding have SDO/SA0 pull-up (e.g. LIS2DH12, LIS3DH).

  anym-on-int1:
    type: boolean
    description: |
      Indicates that the device driver should use interrupt 1
      for any movement. This is for boards that only have one
      interrupt line connected from the sensor to the processor.

  anym-no-latch:
    type: boolean
    description: |
      Disable the latching of interrupts for any movement.

  anym-mode:
    type: int
    default: 0
    description: |
      Select the interrupt mode for any movement.

      0 = OR combination of interrupt events
      1 = 6D movement recognition
      2 = AND combination of interrupt events
      3 = 6D position recognition

      The default of 0 is the power-on-reset value.
    enum:
      - 0
      - 1
      - 2
      - 3