| .. _amg88xx_shields: |
| |
| Panasonic Grid-EYE (AMG88xx) Shields |
| #################################### |
| |
| Overview |
| ******** |
| |
| The Panasonic AMG88XX is an 8x8 (64) pixel infrared array sensor available |
| only in a SMD design. Here are two sources for easily working with this sensor: |
| |
| - `AMG88xx Evaluation Kit`_ |
| - `Adafruit AMG8833 8x8 Thermal Camera Sensor`_ |
| |
| Current supported shields |
| ========================= |
| |
| +--------------------------------+--------------------------------+ |
| | Name | Shield Designation | |
| | | | |
| +================================+================================+ |
| | AMG88xx Evaluation Kit | amg88xx_eval_kit | |
| +--------------------------------+--------------------------------+ |
| |
| Requirements AMG88xx Evaluation Kit |
| *********************************** |
| |
| On the AMG88xx Evaluation Kit, all jumpers except the J11 and J14 must be removed. |
| This shield can only be used with a board that provides a configuration |
| for Arduino connectors and defines node aliases for I2C and GPIO interfaces |
| (see :ref:`shields` for more details). |
| |
| Pins Assignment of the AMG88xx Evaluation Kit Shield |
| ==================================================== |
| |
| +-----------------------+------------+----------------------------+ |
| | Shield Connector Pin | Function | | |
| +=======================+============+============================+ |
| | D6 | INT | AMG88xx INT Pin | |
| +-----------------------+------------+----------------------------+ |
| | D14 | I2C SDA | AMG88xx SDA Pin | |
| +-----------------------+------------+----------------------------+ |
| | D15 | I2C SCL | AMG88xx SCL Pin | |
| +-----------------------+------------+----------------------------+ |
| |
| The same shield designation can also be used with breakout boards like |
| `Adafruit AMG8833 8x8 Thermal Camera Sensor`_. The wires should be connected |
| according to the table above. |
| |
| Programming |
| *********** |
| |
| Correct shield designation (see the table above) for your shield must |
| be entered when you invoke ``west build``. |
| For example: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/sensor/amg88xx |
| :board: nrf52840dk_nrf52840 |
| :shield: amg88xx_eval_kit |
| :goals: build |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| - https://eu.industrial.panasonic.com/products/sensors-optical-devices/sensors-automotive-and-industrial-applications/infrared-array |
| |
| .. _`AMG88xx Evaluation Kit`: https://eu.industrial.panasonic.com/grideye-evalkit |
| .. _`Adafruit AMG8833 8x8 Thermal Camera Sensor`: https://learn.adafruit.com/adafruit-amg8833-8x8-thermal-camera-sensor/overview |