/*
 * Copyright (c) 2019 Intel Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#ifndef ZEPHYR_INCLUDE_DRIVERS_PCIE_PCIE_H_
#define ZEPHYR_INCLUDE_DRIVERS_PCIE_PCIE_H_

#include <stddef.h>
#include <dt-bindings/pcie/pcie.h>
#include <zephyr/types.h>

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @typedef pcie_bdf_t
 * @brief A unique PCI(e) endpoint (bus, device, function).
 *
 * A PCI(e) endpoint is uniquely identified topologically using a
 * (bus, device, function) tuple. The internal structure is documented
 * in include/dt-bindings/pcie/pcie.h: see PCIE_BDF() and friends, since
 * these tuples are referenced from devicetree.
 */
typedef uint32_t pcie_bdf_t;

/**
 * @typedef pcie_id_t
 * @brief A unique PCI(e) identifier (vendor ID, device ID).
 *
 * The PCIE_CONF_ID register for each endpoint is a (vendor ID, device ID)
 * pair, which is meant to tell the system what the PCI(e) endpoint is. Again,
 * look to PCIE_ID_* macros in include/dt-bindings/pcie/pcie.h for more.
 */
typedef uint32_t pcie_id_t;

struct pcie_mbar {
	uintptr_t phys_addr;
	size_t size;
};

/*
 * These functions are arch-, board-, or SoC-specific.
 */

/**
 * @brief Look up the BDF based on PCI(e) vendor & device ID
 *
 * This function is used to look up the BDF for a device given its
 * vendor and device ID.
 *
 * @param id PCI(e) vendor & device ID encoded using PCIE_ID()
 * @return The BDF for the device, or PCIE_BDF_NONE if it was not found
 */
extern pcie_bdf_t pcie_bdf_lookup(pcie_id_t id);

/**
 * @brief Read a 32-bit word from an endpoint's configuration space.
 *
 * This function is exported by the arch/SoC/board code.
 *
 * @param bdf PCI(e) endpoint
 * @param reg the configuration word index (not address)
 * @return the word read (0xFFFFFFFFU if nonexistent endpoint or word)
 */
extern uint32_t pcie_conf_read(pcie_bdf_t bdf, unsigned int reg);

/**
 * @brief Write a 32-bit word to an endpoint's configuration space.
 *
 * This function is exported by the arch/SoC/board code.
 *
 * @param bdf PCI(e) endpoint
 * @param reg the configuration word index (not address)
 * @param data the value to write
 */
extern void pcie_conf_write(pcie_bdf_t bdf, unsigned int reg, uint32_t data);

/**
 * @brief Probe for the presence of a PCI(e) endpoint.
 *
 * @param bdf the endpoint to probe
 * @param id the endpoint ID to expect, or PCIE_ID_NONE for "any device"
 * @return true if the device is present, false otherwise
 */
extern bool pcie_probe(pcie_bdf_t bdf, pcie_id_t id);

/**
 * @brief Get the MBAR at a specific BAR index
 * @param bdf the PCI(e) endpoint
 * @param bar_index 0-based BAR index
 * @param mbar Pointer to struct pcie_mbar
 * @return true if the mbar was found and is valid, false otherwise
 */
extern bool pcie_get_mbar(pcie_bdf_t bdf,
			  unsigned int bar_index,
			  struct pcie_mbar *mbar);

/**
 * @brief Probe the nth MMIO address assigned to an endpoint.
 * @param bdf the PCI(e) endpoint
 * @param index (0-based) index
 * @param mbar Pointer to struct pcie_mbar
 * @return true if the mbar was found and is valid, false otherwise
 *
 * A PCI(e) endpoint has 0 or more memory-mapped regions. This function
 * allows the caller to enumerate them by calling with index=0..n.
 * Value of n has to be below 6, as there is a maximum of 6 BARs. The indices
 * are order-preserving with respect to the endpoint BARs: e.g., index 0
 * will return the lowest-numbered memory BAR on the endpoint.
 */
extern bool pcie_probe_mbar(pcie_bdf_t bdf,
			    unsigned int index,
			    struct pcie_mbar *mbar);

/**
 * @brief Set or reset bits in the endpoint command/status register.
 *
 * @param bdf the PCI(e) endpoint
 * @param bits the powerset of bits of interest
 * @param on use true to set bits, false to reset them
 */
extern void pcie_set_cmd(pcie_bdf_t bdf, uint32_t bits, bool on);

#ifndef CONFIG_PCIE_CONTROLLER
/**
 * @brief Allocate an IRQ for an endpoint.
 *
 * This function first checks the IRQ register and if it contains a valid
 * value this is returned. If the register does not contain a valid value
 * allocation of a new one is attempted.
 * Such function is only exposed if CONFIG_PCIE_CONTROLLER is unset.
 * It is thus available where architecture tied dynamic IRQ allocation for
 * PCIe device makes sense.
 *
 * @param bdf the PCI(e) endpoint
 * @return the IRQ number, or PCIE_CONF_INTR_IRQ_NONE if allocation failed.
 */
extern unsigned int pcie_alloc_irq(pcie_bdf_t bdf);
#endif /* CONFIG_PCIE_CONTROLLER */

/**
 * @brief Return the IRQ assigned by the firmware/board to an endpoint.
 *
 * @param bdf the PCI(e) endpoint
 * @return the IRQ number, or PCIE_CONF_INTR_IRQ_NONE if unknown.
 */
extern unsigned int pcie_get_irq(pcie_bdf_t bdf);

/**
 * @brief Enable the PCI(e) endpoint to generate the specified IRQ.
 *
 * @param bdf the PCI(e) endpoint
 * @param irq the IRQ to generate
 *
 * If MSI is enabled and the endpoint supports it, the endpoint will
 * be configured to generate the specified IRQ via MSI. Otherwise, it
 * is assumed that the IRQ has been routed by the boot firmware
 * to the specified IRQ, and the IRQ is enabled (at the I/O APIC, or
 * wherever appropriate).
 */
extern void pcie_irq_enable(pcie_bdf_t bdf, unsigned int irq);

/**
 * @brief Find a PCI(e) capability in an endpoint's configuration space.
 *
 * @param bdf the PCI endpoint to examine
 * @param cap_id the capability ID of interest
 * @return the index of the configuration word, or 0 if no capability.
 */
extern uint32_t pcie_get_cap(pcie_bdf_t bdf, uint32_t cap_id);

/**
 * @brief Find an Extended PCI(e) capability in an endpoint's configuration space.
 *
 * @param bdf the PCI endpoint to examine
 * @param cap_id the capability ID of interest
 * @return the index of the configuration word, or 0 if no capability.
 */
extern uint32_t pcie_get_ext_cap(pcie_bdf_t bdf, uint32_t cap_id);

/**
 * @brief Dynamically connect a PCIe endpoint IRQ to an ISR handler
 *
 * @param bdf the PCI endpoint to examine
 * @param irq the IRQ to connect (see pcie_alloc_irq())
 * @param priority priority of the IRQ
 * @param routine the ISR handler to connect to the IRQ
 * @param parameter the parameter to provide to the handler
 * @param flags IRQ connection flags
 * @return true if connected, false otherwise
 */
extern bool pcie_connect_dynamic_irq(pcie_bdf_t bdf,
				     unsigned int irq,
				     unsigned int priority,
				     void (*routine)(const void *parameter),
				     const void *parameter,
				     uint32_t flags);

/*
 * Configuration word 13 contains the head of the capabilities list.
 */

#define PCIE_CONF_CAPPTR	13U	/* capabilities pointer */
#define PCIE_CONF_CAPPTR_FIRST(w)	(((w) >> 2) & 0x3FU)

/*
 * The first word of every capability contains a capability identifier,
 * and a link to the next capability (or 0) in configuration space.
 */

#define PCIE_CONF_CAP_ID(w)		((w) & 0xFFU)
#define PCIE_CONF_CAP_NEXT(w)		(((w) >> 10) & 0x3FU)

/*
 * The extended PCI Express capabilities lie at the end of the PCI configuration space
 */

#define PCIE_CONF_EXT_CAPPTR	64U

/*
 * The first word of every capability contains an extended capability identifier,
 * and a link to the next capability (or 0) in the extended configuration space.
 */

#define PCIE_CONF_EXT_CAP_ID(w)		((w) & 0xFFFFU)
#define PCIE_CONF_EXT_CAP_VER(w)	(((w) >> 16) & 0xFU)
#define PCIE_CONF_EXT_CAP_NEXT(w)	(((w) >> 20) & 0xFFFU)

/*
 * Configuration word 0 aligns directly with pcie_id_t.
 */

#define PCIE_CONF_ID		0U

/*
 * Configuration word 1 contains command and status bits.
 */

#define PCIE_CONF_CMDSTAT	1U	/* command/status register */

#define PCIE_CONF_CMDSTAT_IO		0x00000001U  /* I/O access enable */
#define PCIE_CONF_CMDSTAT_MEM		0x00000002U  /* mem access enable */
#define PCIE_CONF_CMDSTAT_MASTER	0x00000004U  /* bus master enable */
#define PCIE_CONF_CMDSTAT_CAPS		0x00100000U  /* capabilities list */

/*
 * Configuration word 2 has additional function identification that
 * we only care about for debug output (PCIe shell commands).
 */

#define PCIE_CONF_CLASSREV	2U	/* class/revision register */

#define PCIE_CONF_CLASSREV_CLASS(w)	(((w) >> 24) & 0xFFU)
#define PCIE_CONF_CLASSREV_SUBCLASS(w)  (((w) >> 16) & 0xFFU)
#define PCIE_CONF_CLASSREV_PROGIF(w)	(((w) >> 8) & 0xFFU)
#define PCIE_CONF_CLASSREV_REV(w)	((w) & 0xFFU)

/*
 * The only part of configuration word 3 that is of interest to us is
 * the header type, as we use it to distinguish functional endpoints
 * from bridges (which are, for our purposes, transparent).
 */

#define PCIE_CONF_TYPE		3U

#define PCIE_CONF_MULTIFUNCTION(w)	(((w) & 0x00800000U) != 0U)
#define PCIE_CONF_TYPE_BRIDGE(w)	(((w) & 0x007F0000U) != 0U)

/*
 * Words 4-9 are BARs are I/O or memory decoders. Memory decoders may
 * be 64-bit decoders, in which case the next configuration word holds
 * the high-order bits (and is, thus, not a BAR itself).
 */

#define PCIE_CONF_BAR0		4U
#define PCIE_CONF_BAR1		5U
#define PCIE_CONF_BAR2		6U
#define PCIE_CONF_BAR3		7U
#define PCIE_CONF_BAR4		8U
#define PCIE_CONF_BAR5		9U

#define PCIE_CONF_BAR_IO(w)		(((w) & 0x00000001U) == 0x00000001U)
#define PCIE_CONF_BAR_MEM(w)		(((w) & 0x00000001U) != 0x00000001U)
#define PCIE_CONF_BAR_64(w)		(((w) & 0x00000006U) == 0x00000004U)
#define PCIE_CONF_BAR_ADDR(w)		((w) & ~0xfUL)
#define PCIE_CONF_BAR_IO_ADDR(w)	((w) & ~0x3UL)
#define PCIE_CONF_BAR_FLAGS(w)		((w) & 0xfUL)
#define PCIE_CONF_BAR_NONE		0U

#define PCIE_CONF_BAR_INVAL		0xFFFFFFF0U
#define PCIE_CONF_BAR_INVAL64		0xFFFFFFFFFFFFFFF0UL

#define PCIE_CONF_BAR_INVAL_FLAGS(w)			\
	((((w) & 0x00000006U) == 0x00000006U) ||	\
	 (((w) & 0x00000006U) == 0x00000002U))

/*
 * Type 1 Header has files related to bus management
 */
#define PCIE_BUS_NUMBER         6U

#define PCIE_BUS_PRIMARY_NUMBER(w)      ((w) & 0xffUL)
#define PCIE_BUS_SECONDARY_NUMBER(w)    (((w) >> 8) & 0xffUL)
#define PCIE_BUS_SUBORDINATE_NUMBER(w)  (((w) >> 16) & 0xffUL)
#define PCIE_SECONDARY_LATENCY_TIMER(w) (((w) >> 24) & 0xffUL)

#define PCIE_BUS_NUMBER_VAL(prim, sec, sub, lat) \
	(((prim) & 0xffUL) |			 \
	 (((sec) & 0xffUL) << 8) |		 \
	 (((sub) & 0xffUL) << 16) |		 \
	 (((lat) & 0xffUL) << 24))

/*
 * Type 1 words 7 to 12 setups Bridge Memory base and limits
 */
#define PCIE_IO_SEC_STATUS      7U

#define PCIE_IO_BASE(w)         ((w) & 0xffUL)
#define PCIE_IO_LIMIT(w)        (((w) >> 8) & 0xffUL)
#define PCIE_SEC_STATUS(w)      (((w) >> 16) & 0xffffUL)

#define PCIE_IO_SEC_STATUS_VAL(iob, iol, sec_status) \
	(((iob) & 0xffUL) |			     \
	 (((iol) & 0xffUL) << 8) |		     \
	 (((sec_status) & 0xffffUL) << 16))

#define PCIE_MEM_BASE_LIMIT     8U

#define PCIE_MEM_BASE(w)        ((w) & 0xffffUL)
#define PCIE_MEM_LIMIT(w)       (((w) >> 16) & 0xffffUL)

#define PCIE_MEM_BASE_LIMIT_VAL(memb, meml) \
	(((memb) & 0xffffUL) |		    \
	 (((meml) & 0xffffUL) << 16))

#define PCIE_PREFETCH_BASE_LIMIT        9U

#define PCIE_PREFETCH_BASE(w)   ((w) & 0xffffUL)
#define PCIE_PREFETCH_LIMIT(w)  (((w) >> 16) & 0xffffUL)

#define PCIE_PREFETCH_BASE_LIMIT_VAL(pmemb, pmeml) \
	(((pmemb) & 0xffffUL) |			   \
	 (((pmeml) & 0xffffUL) << 16))

#define PCIE_PREFETCH_BASE_UPPER        10U

#define PCIE_PREFETCH_LIMIT_UPPER       11U

#define PCIE_IO_BASE_LIMIT_UPPER        12U

#define PCIE_IO_BASE_UPPER(w)   ((w) & 0xffffUL)
#define PCIE_IO_LIMIT_UPPER(w)  (((w) >> 16) & 0xffffUL)

#define PCIE_IO_BASE_LIMIT_UPPER_VAL(iobu, iolu) \
	(((iobu) & 0xffffUL) |			 \
	 (((iolu) & 0xffffUL) << 16))

/*
 * Word 15 contains information related to interrupts.
 *
 * We're only interested in the low byte, which is [supposed to be] set by
 * the firmware to indicate which wire IRQ the device interrupt is routed to.
 */

#define PCIE_CONF_INTR		15U

#define PCIE_CONF_INTR_IRQ(w)	((w) & 0xFFU)
#define PCIE_CONF_INTR_IRQ_NONE	0xFFU  /* no interrupt routed */

#define PCIE_MAX_BUS  (0xFFFFFFFF & PCIE_BDF_BUS_MASK)
#define PCIE_MAX_DEV  (0xFFFFFFFF & PCIE_BDF_DEV_MASK)
#define PCIE_MAX_FUNC (0xFFFFFFFF & PCIE_BDF_FUNC_MASK)

/**
 * @brief Initialize an interrupt handler for a PCIe endpoint IRQ
 *
 * This routine is only meant to be used by drivers using PCIe bus and having
 * fixed or MSI based IRQ (so no runtime detection of the IRQ). In case
 * of runtime detection see pcie_connect_dynamic_irq()
 *
 * @param bdf_p PCIe endpoint BDF
 * @param irq_p IRQ line number.
 * @param priority_p Interrupt priority.
 * @param isr_p Address of interrupt service routine.
 * @param isr_param_p Parameter passed to interrupt service routine.
 * @param flags_p Architecture-specific IRQ configuration flags..
 */
#define PCIE_IRQ_CONNECT(bdf_p, irq_p, priority_p,			\
			 isr_p, isr_param_p, flags_p)			\
	ARCH_PCIE_IRQ_CONNECT(bdf_p, irq_p, priority_p,			\
			      isr_p, isr_param_p, flags_p)

#ifdef __cplusplus
}
#endif

#endif /* ZEPHYR_INCLUDE_DRIVERS_PCIE_PCIE_H_ */