/*
 * Copyright (c) 2021 Espressif Systems (Shanghai) Co., Ltd.
 *
 * SPDX-License-Identifier: Apache-2.0
 */
/dts-v1/;

#include <espressif/esp32.dtsi>

/ {
	model = "esp32";
	compatible = "espressif,esp32";

	aliases {
		led0 = &blue_led;
		led1 = &green_led;
		led2 = &red_led;
		uart-0 = &uart0;
		i2c-0 = &i2c0;
	};

	chosen {
		zephyr,sram = &sram0;
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,flash = &flash0;
		zephyr,display = &ili9341;
	};

	leds {
		compatible = "gpio-leds";

		blue_led: led_0 {
			gpios =  <&gpio0 4 GPIO_ACTIVE_HIGH>;
			label = "Blue - LED0";
		};

		green_led: led_1 {
			gpios =  <&gpio0 2 GPIO_ACTIVE_HIGH>;
			label = "Green - LED1";
		};

		red_led: led_2 {
			gpios =  <&gpio0 0 GPIO_ACTIVE_HIGH>;
			label = "Red - LED2";
		};
	};
};

&cpu0 {
	clock-frequency = <ESP32_CLK_CPU_240M>;
};

&cpu1 {
	clock-frequency = <ESP32_CLK_CPU_240M>;
};

&uart0 {
	status = "okay";
	current-speed = <115200>;
	tx-pin = <1>;
	rx-pin = <3>;
};

&gpio0 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&i2c0 {
	status = "okay";
	clock-frequency = <I2C_BITRATE_STANDARD>;
	sda-pin = <21>;
	scl-pin = <22>;
};

&spi2 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	miso-pin = <12>;
	mosi-pin = <13>;
	sclk-pin = <14>;
	csel-pin = <15>;
};

&spi3 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	miso-pin = <25>;
	mosi-pin = <23>;
	sclk-pin = <19>;
	csel-pin = <22>;

	ili9341: ili9341@0 {
		compatible = "ilitek,ili9341";
		label = "DISPLAY";
		spi-max-frequency = <25000000>;
		reg = <0>;
		cmd-data-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
		pixel-format = <0>;
		rotation = <0>;
		width = <240>;
		height = <320>;
	};
};

&timer0 {
	status = "okay";
};

&timer1 {
	status = "okay";
};

&timer2 {
	status = "okay";
};

&timer3 {
	status = "okay";
};

&trng0 {
	status = "okay";
};

&flash0 {
	status = "okay";
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		/* Reserve 60kB for the bootloader */
		boot_partition: partition@1000 {
			label = "mcuboot";
			reg = <0x00001000 0x0000F000>;
			read-only;
		};

		/* Reserve 1024kB for the application in slot 0 */
		slot0_partition: partition@10000 {
			label = "image-0";
			reg = <0x00010000 0x00100000>;
		};

		/* Reserve 1024kB for the application in slot 1 */
		slot1_partition: partition@110000 {
			label = "image-1";
			reg = <0x00110000 0x00100000>;
		};

		/* Reserve 256kB for the scratch partition */
		scratch_partition: partition@210000 {
			   label = "image-scratch";
			   reg = <0x00210000 0x00040000>;
		};

		storage_partition: partition@250000 {
			label = "storage";
			reg = <0x00250000 0x00006000>;
		};
	};
};