/*
 * Copyright (c) 2024 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <mem.h>
#include <nordic/nrf_common.dtsi>

/delete-node/ &sw_pwm;

/* Domain IDs. Can be used to specify channel links in IPCT nodes. */
#define NRF_DOMAIN_ID_APPLICATION 0
#define NRF_DOMAIN_ID_FLPR 1

/ {
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpuapp: cpu@0 {
			compatible = "arm,cortex-m33f";
			reg = <0>;
			device_type = "cpu";
			clock-frequency = <DT_FREQ_M(128)>;
			#address-cells = <1>;
			#size-cells = <1>;
			itm: itm@e0000000 {
				compatible = "arm,armv8m-itm";
				reg = <0xe0000000 0x1000>;
				swo-ref-frequency = <DT_FREQ_M(128)>;
			};
		};

		cpuflpr: cpu@1 {
			compatible = "nordic,vpr";
			reg = <1>;
			device_type = "cpu";
			clock-frequency = <DT_FREQ_M(128)>;
			riscv,isa = "rv32emc";
			nordic,bus-width = <32>;

			cpuflpr_vevif_local: mailbox {
				compatible = "nordic,nrf-vevif-local";
				status = "disabled";
				interrupt-parent = <&cpuflpr_clic>;
				interrupts = <0 NRF_DEFAULT_IRQ_PRIORITY>,
							<1 NRF_DEFAULT_IRQ_PRIORITY>,
							<2 NRF_DEFAULT_IRQ_PRIORITY>,
							<3 NRF_DEFAULT_IRQ_PRIORITY>,
							<4 NRF_DEFAULT_IRQ_PRIORITY>,
							<5 NRF_DEFAULT_IRQ_PRIORITY>,
							<6 NRF_DEFAULT_IRQ_PRIORITY>,
							<7 NRF_DEFAULT_IRQ_PRIORITY>,
							<8 NRF_DEFAULT_IRQ_PRIORITY>,
							<9 NRF_DEFAULT_IRQ_PRIORITY>,
							<10 NRF_DEFAULT_IRQ_PRIORITY>,
							<11 NRF_DEFAULT_IRQ_PRIORITY>,
							<12 NRF_DEFAULT_IRQ_PRIORITY>,
							<13 NRF_DEFAULT_IRQ_PRIORITY>,
							<14 NRF_DEFAULT_IRQ_PRIORITY>,
							<15 NRF_DEFAULT_IRQ_PRIORITY>,
							<16 NRF_DEFAULT_IRQ_PRIORITY>,
							<17 NRF_DEFAULT_IRQ_PRIORITY>,
							<18 NRF_DEFAULT_IRQ_PRIORITY>,
							<19 NRF_DEFAULT_IRQ_PRIORITY>,
							<20 NRF_DEFAULT_IRQ_PRIORITY>,
							<21 NRF_DEFAULT_IRQ_PRIORITY>,
							<22 NRF_DEFAULT_IRQ_PRIORITY>,
							<23 NRF_DEFAULT_IRQ_PRIORITY>,
							<24 NRF_DEFAULT_IRQ_PRIORITY>,
							<25 NRF_DEFAULT_IRQ_PRIORITY>,
							<26 NRF_DEFAULT_IRQ_PRIORITY>,
							<27 NRF_DEFAULT_IRQ_PRIORITY>,
							<28 NRF_DEFAULT_IRQ_PRIORITY>,
							<29 NRF_DEFAULT_IRQ_PRIORITY>,
							<30 NRF_DEFAULT_IRQ_PRIORITY>,
							<31 NRF_DEFAULT_IRQ_PRIORITY>;
				#mbox-cells = <1>;
				nordic,tasks = <18>;
				nordic,tasks-mask = <0x007f0000>;
			};
		};
	};

	clocks {
		lfxo: lfxo {
			compatible = "nordic,nrf-lfxo";
			#clock-cells = <0>;
			clock-frequency = <32768>;
		};

		hfxo: hfxo {
			compatible = "nordic,nrf-hfxo";
			#clock-cells = <0>;
			clock-frequency = <DT_FREQ_M(32)>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;

		uicr: uicr@ffd000 {
			compatible = "nordic,nrf-uicr";
			reg = <0xffd000 0x1000>;
		};

		ficr: ficr@ffc000 {
			compatible = "nordic,nrf-ficr";
			reg = <0xffc000 0x1000>;
			#nordic,ficr-cells = <1>;
		};

		cpuapp_sram: memory@20000000 {
			compatible = "mmio-sram";
			reg = <0x20000000 DT_SIZE_K(188)>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x20000000 0x2f000>;
		};

		cpuflpr_sram: memory@2002f000 {
			compatible = "mmio-sram";
			reg = <0x2002f000 DT_SIZE_K(68)>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x2002f000 0x11000>;
		};

		global_peripherals: peripheral@50000000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x50000000 0x10000000>;

			dppic00: dppic@42000 {
				compatible = "nordic,nrf-dppic";
				reg = <0x42000 0x808>;
				status = "disabled";
			};

			spi00: spi@4a000 {
				/*
				 * This spi node can be either SPIM or SPIS,
				 * for the user to pick:
				 * compatible = "nordic,nrf-spim" or
				 *              "nordic,nrf-spis".
				 */
				compatible = "nordic,nrf-spim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x4a000 0x1000>;
				interrupts = <74 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(32)>;
				easydma-maxcnt-bits = <16>;
				rx-delay-supported;
				rx-delay = <1>;
				status = "disabled";
			};

			uart00: uart@4a000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x4a000 0x1000>;
				interrupts = <74 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			cpuflpr_vpr: vpr@4c000 {
				compatible = "nordic,nrf-vpr-coprocessor";
				reg = <0x4c000 0x1000>;
				ranges = <0x0 0x4c000 0x1000>;
				#address-cells = <1>;
				#size-cells = <1>;
				status = "disabled";

				cpuflpr_vevif_remote: mailbox@0 {
					compatible = "nordic,nrf-vevif-remote";
					reg = <0x0 0x1000>;
					#mbox-cells = <1>;
					nordic,tasks = <18>;
					nordic,tasks-mask = <0x007f0000>;
					status = "disabled";
				};

				cpuflpr_clic: interrupt-controller@f0000000 {
					compatible = "nordic,nrf-clic";
					reg = <0xf0000000 0x1780>;
					interrupt-controller;
					#interrupt-cells = <2>;
					#address-cells = <1>;
					status = "disabled";
				};
			};

			gpio2: gpio@50400 {
				compatible = "nordic,nrf-gpio";
				gpio-controller;
				reg = <0x50400 0x300>;
				#gpio-cells = <2>;
				ngpios = <11>;
				status = "disabled";
				port = <2>;
			};

			timer00: timer@55000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0x55000 0x1000>;
				cc-num = <6>;
				max-bit-width = <32>;
				interrupts = <85 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			dppic10: dppic@82000 {
				compatible = "nordic,nrf-dppic";
				reg = <0x82000 0x808>;
				status = "disabled";
			};

			timer10: timer@85000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0x85000 0x1000>;
				cc-num = <8>;
				max-bit-width = <32>;
				interrupts = <133 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			egu10: egu@87000 {
				compatible = "nordic,nrf-egu";
				reg = <0x87000 0x1000>;
				interrupts = <135 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			radio: radio@8a000 {
				compatible = "nordic,nrf-radio";
				reg = <0x8a000 0x1000>;
				interrupts = <138 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
				dfe-supported;
				ieee802154-supported;
				ble-2mbps-supported;
				ble-coded-phy-supported;

				ieee802154: ieee802154 {
					compatible = "nordic,nrf-ieee802154";
					status = "disabled";
				};
			};

			dppic20: dppic@c2000 {
				compatible = "nordic,nrf-dppic";
				reg = <0xc2000 0x808>;
				status = "disabled";
			};

			i2c20: i2c@c6000 {
				compatible = "nordic,nrf-twim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xc6000 0x1000>;
				clock-frequency = <I2C_BITRATE_STANDARD>;
				interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <16>;
				status = "disabled";
			};

			spi20: spi@c6000 {
				/*
				 * This spi node can be either SPIM or SPIS,
				 * for the user to pick:
				 * compatible = "nordic,nrf-spim" or
				 *              "nordic,nrf-spis".
				 */
				compatible = "nordic,nrf-spim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xc6000 0x1000>;
				interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				easydma-maxcnt-bits = <16>;
				rx-delay-supported;
				rx-delay = <1>;
				status = "disabled";
			};

			uart20: uart@c6000 {
				compatible = "nordic,nrf-uarte";
				reg = <0xc6000 0x1000>;
				interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			i2c21: i2c@c7000 {
				compatible = "nordic,nrf-twim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xc7000 0x1000>;
				clock-frequency = <I2C_BITRATE_STANDARD>;
				interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <16>;
				status = "disabled";
			};

			spi21: spi@c7000 {
				/*
				 * This spi node can be either SPIM or SPIS,
				 * for the user to pick:
				 * compatible = "nordic,nrf-spim" or
				 *              "nordic,nrf-spis".
				 */
				compatible = "nordic,nrf-spim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xc7000 0x1000>;
				interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				easydma-maxcnt-bits = <16>;
				rx-delay-supported;
				rx-delay = <1>;
				status = "disabled";
			};

			uart21: uart@c7000 {
				compatible = "nordic,nrf-uarte";
				reg = <0xc7000 0x1000>;
				interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			i2c22: i2c@c8000 {
				compatible = "nordic,nrf-twim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xc8000 0x1000>;
				clock-frequency = <I2C_BITRATE_STANDARD>;
				interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <16>;
				status = "disabled";
			};

			spi22: spi@c8000 {
				/*
				 * This spi node can be either SPIM or SPIS,
				 * for the user to pick:
				 * compatible = "nordic,nrf-spim" or
				 *              "nordic,nrf-spis".
				 */
				compatible = "nordic,nrf-spim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xc8000 0x1000>;
				interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				easydma-maxcnt-bits = <16>;
				rx-delay-supported;
				rx-delay = <1>;
				status = "disabled";
			};

			uart22: uart@c8000 {
				compatible = "nordic,nrf-uarte";
				reg = <0xc8000 0x1000>;
				interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			egu20: egu@c9000 {
				compatible = "nordic,nrf-egu";
				reg = <0xc9000 0x1000>;
				interrupts = <201 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			timer20: timer@ca000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0xca000 0x1000>;
				cc-num = <6>;
				max-bit-width = <32>;
				interrupts = <202 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			timer21: timer@cb000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0xcb000 0x1000>;
				cc-num = <6>;
				max-bit-width = <32>;
				interrupts = <203 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			timer22: timer@cc000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0xcc000 0x1000>;
				cc-num = <6>;
				max-bit-width = <32>;
				interrupts = <204 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			timer23: timer@cd000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0xcd000 0x1000>;
				cc-num = <6>;
				max-bit-width = <32>;
				interrupts = <205 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			timer24: timer@ce000 {
				compatible = "nordic,nrf-timer";
				status = "disabled";
				reg = <0xce000 0x1000>;
				cc-num = <6>;
				max-bit-width = <32>;
				interrupts = <206 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <0>;
			};

			pwm20: pwm@d2000 {
				compatible = "nordic,nrf-pwm";
				status = "disabled";
				reg = <0xd2000 0x1000>;
				interrupts = <210 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			pwm21: pwm@d3000 {
				compatible = "nordic,nrf-pwm";
				status = "disabled";
				reg = <0xd3000 0x1000>;
				interrupts = <211 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			pwm22: pwm@d4000 {
				compatible = "nordic,nrf-pwm";
				status = "disabled";
				reg = <0xd4000 0x1000>;
				interrupts = <212 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			adc: adc@d5000 {
				compatible = "nordic,nrf-saadc";
				reg = <0xd5000 0x1000>;
				interrupts = <213 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
				#io-channel-cells = <1>;
			};

			nfct: nfct@d6000 {
				compatible = "nordic,nrf-nfct";
				reg = <0xd6000 0x1000>;
				interrupts = <214 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			temp: temp@d7000 {
				compatible = "nordic,nrf-temp";
				reg = <0xd7000 0x1000>;
				interrupts = <215 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			gpio1: gpio@d8200 {
				compatible = "nordic,nrf-gpio";
				gpio-controller;
				reg = <0xd8200 0x300>;
				#gpio-cells = <2>;
				ngpios = <16>;
				status = "disabled";
				port = <1>;
				gpiote-instance = <&gpiote20>;
			};

			gpiote20: gpiote@da000 {
				compatible = "nordic,nrf-gpiote";
				reg = <0xda000 0x1000>;
				status = "disabled";
				instance = <20>;
			};

			i2s20: i2s@dd000 {
				compatible = "nordic,nrf-i2s";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0xdd000 0x1000>;
				interrupts = <221 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			qdec20: qdec@e0000 {
				compatible = "nordic,nrf-qdec";
				reg = <0xe0000 0x1000>;
				interrupts = <224 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			qdec21: qdec@e1000 {
				compatible = "nordic,nrf-qdec";
				reg = <0xe1000 0x1000>;
				interrupts = <225 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			grtc: grtc@e2000 {
				compatible = "nordic,nrf-grtc";
				reg = <0xe2000 0x1000>;
				cc-num = <12>;
				status = "disabled";
			};

			dppic30: dppic@102000 {
				compatible = "nordic,nrf-dppic";
				reg = <0x102000 0x808>;
				status = "disabled";
			};

			i2c30: i2c@104000 {
				compatible = "nordic,nrf-twim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x104000 0x1000>;
				clock-frequency = <I2C_BITRATE_STANDARD>;
				interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <16>;
				status = "disabled";
			};

			spi30: spi@104000 {
				/*
				 * This spi node can be either SPIM or SPIS,
				 * for the user to pick:
				 * compatible = "nordic,nrf-spim" or
				 *              "nordic,nrf-spis".
				 */
				compatible = "nordic,nrf-spim";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x104000 0x1000>;
				interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				easydma-maxcnt-bits = <16>;
				rx-delay-supported;
				rx-delay = <1>;
				status = "disabled";
			};

			uart30: uart@104000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x104000 0x1000>;
				interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			wdt30: watchdog@108000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x108000 0x620>;
				interrupts = <264 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			wdt31: watchdog@109000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x109000 0x620>;
				interrupts = <265 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			gpio0: gpio@10a000 {
				compatible = "nordic,nrf-gpio";
				gpio-controller;
				reg = <0x10a000 0x300>;
				#gpio-cells = <2>;
				ngpios = <5>;
				status = "disabled";
				port = <0>;
				gpiote-instance = <&gpiote30>;
			};

			gpiote30: gpiote@10c000 {
				compatible = "nordic,nrf-gpiote";
				reg = <0x10c000 0x1000>;
				status = "disabled";
				instance = <30>;
			};

			clock: clock@10e000 {
				compatible = "nordic,nrf-clock";
				reg = <0x10e000 0x1000>;
				interrupts = <270 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};
		};

		rram_controller: rram-controller@5004b000 {
			compatible = "nordic,rram-controller";
			reg = <0x5004b000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;
			interrupts = <75 NRF_DEFAULT_IRQ_PRIORITY>;

			cpuapp_rram: rram@0 {
				compatible = "soc-nv-flash";
				reg = <0x0 DT_SIZE_K(1428)>;
				erase-block-size = <4096>;
				write-block-size = <16>;
			};
			cpuflpr_rram: rram@165000 {
				compatible = "soc-nv-flash";
				reg = <0x165000 DT_SIZE_K(96)>;
				erase-block-size = <4096>;
				write-block-size = <16>;
			};
		};

		cpuapp_ppb: cpuapp-ppb-bus {
			#address-cells = <1>;
			#size-cells = <1>;

			cpuapp_nvic: interrupt-controller@e000e100  {
				#address-cells = <1>;
				compatible = "arm,v8m-nvic";
				reg = <0xe000e100 0xc00>;
				arm,num-irq-priority-bits = <3>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			cpuapp_systick: timer@e000e010 {
				compatible = "arm,armv8m-systick";
				reg = <0xe000e010 0x10>;
				status = "disabled";
			};
		};
	};
};