diff --git a/Kconfig.zephyr b/Kconfig.zephyr
index 63cd4d0..a0fead7 100644
--- a/Kconfig.zephyr
+++ b/Kconfig.zephyr
@@ -85,7 +85,7 @@
 	  This option is selected by targets having a FLASH_LOAD_OFFSET
 	  and FLASH_LOAD_SIZE.
 
-config USE_CODE_PARTITION
+config USE_DT_CODE_PARTITION
 	bool "Link application into /chosen/zephyr,code-partition from devicetree"
 	depends on HAS_FLASH_LOAD_OFFSET
 	help
@@ -98,9 +98,9 @@
 DT_CHOSEN_Z_CODE_PARTITION := zephyr,code-partition
 
 config FLASH_LOAD_OFFSET
-	# Only user-configurable when USE_CODE_PARTITION is disabled
-	hex "Kernel load offset" if !USE_CODE_PARTITION
-	default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_CODE_PARTITION
+	# Only user-configurable when USE_DT_CODE_PARTITION is disabled
+	hex "Kernel load offset" if !USE_DT_CODE_PARTITION
+	default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_DT_CODE_PARTITION
 	default 0
 	depends on HAS_FLASH_LOAD_OFFSET
 	help
@@ -112,9 +112,9 @@
 	  If unsure, leave at the default value 0.
 
 config FLASH_LOAD_SIZE
-	# Only user-configurable when USE_CODE_PARTITION is disabled
-	hex "Kernel load size" if !USE_CODE_PARTITION
-	default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_CODE_PARTITION
+	# Only user-configurable when USE_DT_CODE_PARTITION is disabled
+	hex "Kernel load size" if !USE_DT_CODE_PARTITION
+	default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_DT_CODE_PARTITION
 	default 0
 	depends on HAS_FLASH_LOAD_OFFSET
 	help
@@ -356,7 +356,7 @@
 
 config BOOTLOADER_MCUBOOT
 	bool "MCUboot bootloader support"
-	select USE_CODE_PARTITION
+	select USE_DT_CODE_PARTITION
 	help
 	  This option signifies that the target uses MCUboot as a bootloader,
 	  or in other words that the image is to be chain-loaded by MCUboot.
diff --git a/boards/arm/nrf52840_pca10059/Kconfig.defconfig b/boards/arm/nrf52840_pca10059/Kconfig.defconfig
index bd2dd76..f82a146 100644
--- a/boards/arm/nrf52840_pca10059/Kconfig.defconfig
+++ b/boards/arm/nrf52840_pca10059/Kconfig.defconfig
@@ -9,7 +9,7 @@
 config BOARD
 	default "nrf52840_pca10059"
 
-if BOARD_HAS_NRF5_BOOTLOADER && !USE_CODE_PARTITION
+if BOARD_HAS_NRF5_BOOTLOADER && !USE_DT_CODE_PARTITION
 
 # To let the nRF5 bootloader load an application, the application
 # must be linked after Nordic MBR, that is factory-programmed on the board.
@@ -18,14 +18,14 @@
 # DTS file, so we manually override FLASH_LOAD_OFFEST to link the application
 # correctly, after Nordic MBR.
 
-# When building MCUBoot, MCUBoot itself will select USE_CODE_PARTITION
+# When building MCUBoot, MCUBoot itself will select USE_DT_CODE_PARTITION
 # which will make it link into the correct partition specified in DTS file,
 # so no override is necessary.
 
 config FLASH_LOAD_OFFSET
 	default 0x1000
 
-endif # BOARD_HAS_NRF5_BOOTLOADER && !USE_CODE_PARTITION
+endif # BOARD_HAS_NRF5_BOOTLOADER && !USE_DT_CODE_PARTITION
 
 if ADC
 
diff --git a/soc/riscv/openisa_rv32m1/linker.ld b/soc/riscv/openisa_rv32m1/linker.ld
index 7fe1ae9..b441b89 100644
--- a/soc/riscv/openisa_rv32m1/linker.ld
+++ b/soc/riscv/openisa_rv32m1/linker.ld
@@ -28,7 +28,7 @@
 
 #define VECTOR_SIZE CONFIG_RISCV_RV32M1_VECTOR_SIZE
 
-#ifdef CONFIG_USE_CODE_PARTITION
+#ifdef CONFIG_USE_DT_CODE_PARTITION
 
 #ifdef CONFIG_BOOTLOADER_MCUBOOT