# Kconfig - STM32 MCU clock control driver config
#
# Copyright (c) 2017 Linaro
# Copyright (c) 2017 RnDity Sp. z o.o.
#
#  SPDX-License-Identifier: Apache-2.0
#

if SOC_FAMILY_STM32

menuconfig CLOCK_CONTROL_STM32_CUBE
	bool "STM32 Reset & Clock Control"
	select USE_STM32_LL_UTILS
	select USE_STM32_LL_RCC if SOC_SERIES_STM32MP1X
	help
	  Enable driver for Reset & Clock Control subsystem found
	  in STM32 family of MCUs


if CLOCK_CONTROL_STM32_CUBE

config CLOCK_CONTROL_STM32_DEVICE_INIT_PRIORITY
	int "Clock Control Device Priority"
	default 1
	help
	  This option controls the priority of clock control
	  device initialization. Higher priority ensures that the device
	  is initialized earlier in the startup cycle. If unsure, leave
	  at default value 1

choice CLOCK_STM32_SYSCLK_SRC
prompt "STM32 System Clock Source"

config CLOCK_STM32_SYSCLK_SRC_HSE
	bool "HSE"
	help
	  Use HSE as source of SYSCLK

config CLOCK_STM32_SYSCLK_SRC_HSI
	bool "HSI"
	help
	  Use HSI as source of SYSCLK

config CLOCK_STM32_SYSCLK_SRC_MSI
	bool "MSI"
	depends on SOC_SERIES_STM32L0X || SOC_SERIES_STM32L4X || SOC_SERIES_STM32WBX
	help
	  Use MSI as source of SYSCLK

config CLOCK_STM32_SYSCLK_SRC_PLL
	bool "PLL"
	help
	  Use PLL as source of SYSCLK

endchoice #CLOCK_STM32_SYSCLK_SRC

config CLOCK_STM32_HSE_BYPASS
	bool "HSE bypass"
	depends on CLOCK_STM32_SYSCLK_SRC_HSE || CLOCK_STM32_PLL_SRC_HSE
	help
	  Enable this option to bypass external high-speed clock (HSE).

config CLOCK_STM32_HSE_CLOCK
	int "HSE clock value"
	depends on CLOCK_STM32_SYSCLK_SRC_HSE || CLOCK_STM32_PLL_SRC_HSE
	default 8000000
	help
	  Value of external high-speed clock (HSE).

config CLOCK_STM32_MSI_RANGE
	int "MSI frequency range"
	depends on CLOCK_STM32_SYSCLK_SRC_MSI
	default 8
	help
	  Frequency range of MSI when MSI range is provided in RCC_CR register
	  Range 0: 100kHz
	  Range 1: 200kHz
	  Range 2 around 400 kHz
	  Range 3 around 800 kHz
	  Range 4: 1 MHz
	  Range 5: 2 MHz
	  Range 6: 4 MHz (reset value)
	  Range 7: 8 MHz
	  Range 8: 16 MHz
	  Range 9: 24 MHz
	  Range 10: 32 MHz
	  Range 11: 48 MHz

choice
prompt "STM32 PLL Clock Source"
depends on CLOCK_STM32_SYSCLK_SRC_PLL
default CLOCK_STM32_PLL_SRC_HSI

config CLOCK_STM32_PLL_SRC_MSI
	bool "MSI"
	depends on SOC_SERIES_STM32L0X || SOC_SERIES_STM32L4X || SOC_SERIES_STM32WBX
	help
	  Use MSI as source of PLL

config CLOCK_STM32_PLL_SRC_HSI
	bool "HSI"
	help
	  Use HSI as source of PLL

config CLOCK_STM32_PLL_SRC_HSE
	bool "HSE"
	help
	  Use HSE as source of PLL

config CLOCK_STM32_PLL_SRC_PLL2
	bool "PLL2"
	depends on SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE
	help
	 Use PLL2 as source of main PLL. This is equivalent of defining
	 PLL2 as source PREDIV1SCR. If not selected, default source is HSE.

endchoice


# Source series specific files for PLL settings

source "drivers/clock_control/Kconfig.stm32f0_f3"
source "drivers/clock_control/Kconfig.stm32f1"
source "drivers/clock_control/Kconfig.stm32f2_f4_f7"
source "drivers/clock_control/Kconfig.stm32h7"
source "drivers/clock_control/Kconfig.stm32l0_l1"
source "drivers/clock_control/Kconfig.stm32l4_wb"
source "drivers/clock_control/Kconfig.stm32g0"

# Bus clocks configuration options

if !SOC_SERIES_STM32H7X

config CLOCK_STM32_AHB_PRESCALER
	int "AHB prescaler"
	default 1
	range 1 512
	depends on !SOC_SERIES_STM32WBX
	help
	  AHB prescaler, allowed values: 1, 2, 4, 8, 16, 64, 128,
	  256, 512.

config CLOCK_STM32_APB1_PRESCALER
	int "APB1 prescaler"
	default 1
	range 1 16
	help
	  APB1 Low speed clock (PCLK1) prescaler, allowed values:
	  1, 2, 4, 8, 16

config CLOCK_STM32_APB2_PRESCALER
	int "APB2 prescaler"
	default 1
	range 1 16
	depends on !SOC_SERIES_STM32F0X
	help
	  APB2 High speed clock (PCLK2) prescaler, allowed values:
	  1, 2, 4, 8, 16

config CLOCK_STM32_CPU1_PRESCALER
	int "CPU1 HCLK prescaler"
	default 1
	range 1 512
	depends on SOC_SERIES_STM32WBX
	help
	  CPU1 HCLK prescaler, allowed values: 1, 2, 4, 8, 16, 64, 128,
	  256, 512.

config CLOCK_STM32_CPU2_PRESCALER
	int "CPU2 HCLK prescaler"
	default 1
	range 1 512
	depends on SOC_SERIES_STM32WBX
	help
	  CPU2 HCLK prescaler, allowed values: 1, 2, 4, 8, 16, 64, 128,
	  256, 512.

config CLOCK_STM32_AHB4_PRESCALER
	int "AHB4 HCLK prescaler"
	default 1
	range 1 512
	depends on SOC_SERIES_STM32WBX
	help
	  HCLK4 prescaler, allowed values: 1, 2, 4, 8, 16, 64, 128,
	  256, 512.

endif # !SOC_SERIES_STM32H7X

# Micro-controller Clock output configuration options

choice
prompt "STM32 MCO1 Clock Source"
default CLOCK_STM32_MCO1_SRC_NOCLOCK

config CLOCK_STM32_MCO1_SRC_NOCLOCK
	bool "NOCLOCK"
	help
	  MCO1 output disabled, no clock on MCO1

config CLOCK_STM32_MCO1_SRC_LSE
	bool "LSE"
	depends on SOC_SERIES_STM32F4X
	help
	  Use LSE as source of MCO1

config CLOCK_STM32_MCO1_SRC_HSE
	bool "HSE"
	depends on SOC_SERIES_STM32F4X
	help
	  Use HSE as source of MCO1

config CLOCK_STM32_MCO1_SRC_HSI
	bool "HSI"
	depends on SOC_SERIES_STM32F4X
	help
	  Use HSI as source of MCO1

config CLOCK_STM32_MCO1_SRC_PLLCLK
	bool "PLLCLK"
	depends on SOC_SERIES_STM32F4X
	help
	  Use PLLCLK as source of MCO1

endchoice

config CLOCK_STM32_MCO1_DIV
	int "MCO1 prescaler"
	depends on !CLOCK_STM32_MCO1_SRC_NOCLOCK
	default 1
	range 1   5
	help
	  allowed values: 1, 2, 3, 4, 5

choice
prompt "STM32 MCO2 Clock Source"
default CLOCK_STM32_MCO2_SRC_NOCLOCK

config CLOCK_STM32_MCO2_SRC_NOCLOCK
	bool "NOCLOCK"
	help
	  MCO2 output disabled, no clock on MCO2

config CLOCK_STM32_MCO2_SRC_SYSCLK
	bool "SYSCLK"
	depends on SOC_SERIES_STM32F4X
	help
	  Use SYSCLK as source of MCO2

config CLOCK_STM32_MCO2_SRC_PLLI2S
	bool "PLLI2S"
	depends on SOC_SERIES_STM32F4X
	help
	  Use PLLI2S as source of MCO2

config CLOCK_STM32_MCO2_SRC_HSE
	bool "HSE"
	depends on SOC_SERIES_STM32F4X
	help
	  Use HSE as source of MCO2

config CLOCK_STM32_MCO2_SRC_PLLCLK
	bool "PLLCLK"
	depends on SOC_SERIES_STM32F4X
	help
	  Use PLLCLK as source of MCO2

endchoice

config CLOCK_STM32_MCO2_DIV
	int "MCO2 prescaler"
	depends on !CLOCK_STM32_MCO2_SRC_NOCLOCK
	default 1
	range 1 5
	help
	  allowed values: 1, 2, 3, 4, 5

endif # CLOCK_CONTROL_STM32_CUBE
endif # SOC_FAMILY_STM32