/*
 * Copyright (c) 2018 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

flash_controller: flash-controller@39000 {
	compatible = "nordic,nrf91-flash-controller";
	reg = <0x39000 0x1000>;

	#address-cells = <1>;
	#size-cells = <1>;

	label="NRF_FLASH_DRV_NAME";

	flash0: flash@0 {
		compatible = "soc-nv-flash";
		label = "NRF_FLASH";
		erase-block-size = <4096>;
		write-block-size = <4>;
	};
};

adc: adc@e000 {
	compatible = "nordic,nrf-saadc";
	reg = <0xe000 0x1000>;
	interrupts = <14 1>;
	status = "disabled";
	label = "ADC_0";
};

dppic: dppic@17000 {
	compatible = "nordic,nrf-dppic";
	reg = <0x17000 0x1000>;
	status = "ok";
	label = "DPPIC";
};

uart0: uart@8000 {
	compatible = "nordic,nrf-uarte";
	reg = <0x8000 0x1000>;
	interrupts = <8 1>;
	status = "disabled";
	label = "UART_0";
};

uart1: uart@9000 {
	compatible = "nordic,nrf-uarte";
	reg = <0x9000 0x1000>;
	interrupts = <9 1>;
	status = "disabled";
	label = "UART_1";
};

uart2: uart@a000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xa000 0x1000>;
	interrupts = <10 1>;
	status = "disabled";
	label = "UART_2";
};

uart3: uart@b000 {
	compatible = "nordic,nrf-uarte";
	reg = <0xb000 0x1000>;
	interrupts = <11 1>;
	status = "disabled";
	label = "UART_3";
};

i2c0: i2c@8000 {
	compatible = "nordic,nrf-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x8000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <8 1>;
	status = "disabled";
	label = "I2C_0";
};

i2c1: i2c@9000 {
	compatible = "nordic,nrf-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x9000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <9 1>;
	status = "disabled";
	label = "I2C_1";
};

i2c2: i2c@a000 {
	compatible = "nordic,nrf-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xa000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <10 1>;
	status = "disabled";
	label = "I2C_2";
};

i2c3: i2c@b000 {
	compatible = "nordic,nrf-i2c";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xb000 0x1000>;
	clock-frequency = <I2C_BITRATE_STANDARD>;
	interrupts = <11 1>;
	status = "disabled";
	label = "I2C_3";
};

spi0: spi@8000 {
	compatible = "nordic,nrf-spi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x8000 0x1000>;
	interrupts = <8 1>;
	status = "disabled";
	label = "SPI_0";
};

spi1: spi@9000 {
	compatible = "nordic,nrf-spi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x9000 0x1000>;
	interrupts = <9 1>;
	status = "disabled";
	label = "SPI_1";
};

spi2: spi@a000 {
	compatible = "nordic,nrf-spi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xa000 0x1000>;
	interrupts = <10 1>;
	status = "disabled";
	label = "SPI_2";
};

spi3: spi@b000 {
	compatible = "nordic,nrf-spi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xb000 0x1000>;
	interrupts = <11 1>;
	status = "disabled";
	label = "SPI_3";
};

pwm0: pwm@21000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x21000 0x1000>;
	interrupts = <33 1>;
	status = "disabled";
	label = "PWM_0";
};

pwm1: pwm@22000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x22000 0x1000>;
	interrupts = <34 1>;
	status = "disabled";
	label = "PWM_1";
};

pwm2: pwm@23000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x23000 0x1000>;
	interrupts = <35 1>;
	status = "disabled";
	label = "PWM_2";
};

pwm3: pwm@24000 {
	compatible = "nordic,nrf-pwm";
	reg = <0x24000 0x1000>;
	interrupts = <36 1>;
	status = "disabled";
	label = "PWM_3";
};

gpio0: gpio@842500 {
	compatible = "nordic,nrf-gpio";
	gpio-controller;
	reg = <0x842500 0x300>;
	#gpio-cells = <2>;
	label = "GPIO_0";
	status = "disabled";
};

rtc0: rtc@14000 {
	compatible = "nordic,nrf-rtc";
	reg = <0x14000 0x1000>;
	interrupts = <20 1>;
	status = "ok";
	label = "RTC_0";
};

rtc1: rtc@15000 {
	compatible = "nordic,nrf-rtc";
	reg = <0x15000 0x1000>;
	interrupts = <21 1>;
	status = "ok";
	label = "RTC_1";
};

clock: clock@5000 {
	compatible = "nordic,nrf-clock";
	reg = <0x5000 0x1000>;
	interrupts = <5 1>;
	status = "ok";
	label = "CLOCK";
};

power: power@5000 {
	compatible = "nordic,nrf-power";
	reg = <0x5000 0x1000>;
	interrupts = <5 1>;
	status = "ok";
};

wdt: watchdog@18000 {
	compatible = "nordic,nrf-watchdog";
	reg = <0x18000 0x1000>;
	interrupts = <24 1>;
	status = "ok";
	label = "WDT";
};

timer0: timer@f000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0xf000 0x1000>;
	interrupts = <15 1>;
	label = "TIMER_0";
};

timer1: timer@10000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0x10000 0x1000>;
	interrupts = <16 1>;
	label = "TIMER_1";
};

timer2: timer@11000 {
	compatible = "nordic,nrf-timer";
	status = "disabled";
	reg = <0x11000 0x1000>;
	interrupts = <17 1>;
	label = "TIMER_2";
};