source [find interface/stlink-dap.cfg]
transport select "dapdirect_swd"

set WORKAREASIZE 0x8000
set CHIPNAME STM32H7B3LIHxQ
set BOARDNAME STM32H7B3I_DK

# Enable debug when in low power modes
set ENABLE_LOW_POWER 1

# Stop Watchdog counters when halt
set STOP_WATCHDOG 1

# Reset configuration
# use hardware reset, connect under reset
# connect_assert_srst needed if low power mode application running (WFI...)
reset_config srst_only srst_nogate connect_assert_srst
set CONNECT_UNDER_RESET 1
set CORE_RESET 0

source [find target/stm32h7x.cfg]