# Kconfig.cmsdk_ahb - ARM CMSDK (Cortex-M System Design Kit) AHB GPIO cfg
#
#
# Copyright (c) 2016 Linaro Limited
#
# SPDX-License-Identifier: Apache-2.0
#

menuconfig GPIO_CMSDK_AHB
	bool "ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers"
	depends on GPIO && SOC_SERIES_BEETLE
	default n
	help
	  Enable config options to support the ARM CMSDK GPIO controllers.

	  Says n if not sure.

if GPIO_CMSDK_AHB

# ---------- Port 0 ----------

config GPIO_CMSDK_AHB_PORT0
	bool "Enable driver for GPIO Port 0"
	depends on GPIO_CMSDK_AHB
	default n
	help
	  Build the driver to utilize GPIO controller Port 0.

config GPIO_CMSDK_AHB_PORT0_DEV_NAME
	string "Device name for Port 0"
	depends on GPIO_CMSDK_AHB_PORT0
	default "GPIO_0"
	help
	  Device name for Port 0.

config GPIO_CMSDK_AHB_PORT0_IRQ_PRI
	int "Interrupt Priority for Port 0"
	depends on GPIO_CMSDK_AHB_PORT0
	default 3
	help
	  Interrupt priority for Port 0.

# ---------- Port 1 ----------

config GPIO_CMSDK_AHB_PORT1
	bool "Enable driver for GPIO Port 1"
	depends on GPIO_CMSDK_AHB
	default n
	help
	  Build the driver to utilize GPIO controller Port 1.

config GPIO_CMSDK_AHB_PORT1_DEV_NAME
	string "Device name for Port 1"
	depends on GPIO_CMSDK_AHB_PORT1
	default "GPIO_1"
	help
	  Device name for Port 1.

config GPIO_CMSDK_AHB_PORT1_IRQ_PRI
	int "Interrupt Priority for Port 1"
	depends on GPIO_CMSDK_AHB_PORT1
	default 3
	help
	  Interrupt priority for Port 1.

# ---------- Port 2 ----------

config GPIO_CMSDK_AHB_PORT2
	bool "Enable driver for GPIO Port 2"
	depends on GPIO_CMSDK_AHB
	default n
	help
	  Build the driver to utilize GPIO controller Port 2.

config GPIO_CMSDK_AHB_PORT2_DEV_NAME
	string "Device name for Port 2"
	depends on GPIO_CMSDK_AHB_PORT2
	default "GPIO_2"
	help
	  Device name for Port 2.

config GPIO_CMSDK_AHB_PORT2_IRQ_PRI
	int "Interrupt Priority for Port 2"
	depends on GPIO_CMSDK_AHB_PORT2
	default 3
	help
	  Interrupt priority for Port 2.

# ---------- Port 3 ----------

config GPIO_CMSDK_AHB_PORT3
	bool "Enable driver for GPIO Port 3"
	depends on GPIO_CMSDK_AHB
	default n
	help
	  Build the driver to utilize GPIO controller Port 3.

config GPIO_CMSDK_AHB_PORT3_DEV_NAME
	string "Device name for Port 3"
	depends on GPIO_CMSDK_AHB_PORT3
	default "GPIO_3"
	help
	  Device name for Port 3.

config GPIO_CMSDK_AHB_PORT3_IRQ_PRI
	int "Interrupt Priority for Port 3"
	depends on GPIO_CMSDK_AHB_PORT3
	default 3
	help
	  Interrupt priority for Port 3.

endif # GPIO_CMSDK_AHB