blob: 1e5558f5856d5e3f5b8f4ffe0b9da2fbe2a1a121 [file] [log] [blame]
/* ENC28J60 Stand-alone Ethernet Controller with SPI
*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT microchip_enc28j60
#define LOG_MODULE_NAME eth_enc28j60
#define LOG_LEVEL CONFIG_ETHERNET_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(LOG_MODULE_NAME);
#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <string.h>
#include <errno.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/spi.h>
#include <zephyr/net/net_pkt.h>
#include <zephyr/net/net_if.h>
#include <zephyr/net/ethernet.h>
#include <ethernet/eth_stats.h>
#include "eth_enc28j60_priv.h"
#define D10D24S 11
static int eth_enc28j60_soft_reset(const struct device *dev)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2] = { ENC28J60_SPI_SC, 0xFF };
const struct spi_buf tx_buf = {
.buf = buf,
.len = 1,
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
return spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_set_bank(const struct device *dev, uint16_t reg_addr)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
.len = 2
};
const struct spi_buf rx_buf = {
.buf = buf,
.len = 2
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
const struct spi_buf_set rx = {
.buffers = &rx_buf,
.count = 1
};
buf[0] = ENC28J60_SPI_RCR | ENC28J60_REG_ECON1;
buf[1] = 0x0;
if (!spi_transceive_dt(&config->spi, &tx, &rx)) {
buf[0] = ENC28J60_SPI_WCR | ENC28J60_REG_ECON1;
buf[1] = (buf[1] & 0xFC) | ((reg_addr >> 8) & 0x0F);
spi_write_dt(&config->spi, &tx);
} else {
LOG_DBG("Failure while setting bank to 0x%04x", reg_addr);
}
}
static void eth_enc28j60_write_reg(const struct device *dev,
uint16_t reg_addr,
uint8_t value)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
.len = 2
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
buf[0] = ENC28J60_SPI_WCR | (reg_addr & 0xFF);
buf[1] = value;
spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_read_reg(const struct device *dev, uint16_t reg_addr,
uint8_t *value)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[3];
const struct spi_buf tx_buf = {
.buf = buf,
.len = 2
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
struct spi_buf rx_buf = {
.buf = buf,
};
const struct spi_buf_set rx = {
.buffers = &rx_buf,
.count = 1
};
uint8_t rx_size = 2U;
if (reg_addr & 0xF000) {
rx_size = 3U;
}
rx_buf.len = rx_size;
buf[0] = ENC28J60_SPI_RCR | (reg_addr & 0xFF);
buf[1] = 0x0;
if (!spi_transceive_dt(&config->spi, &tx, &rx)) {
*value = buf[rx_size - 1];
} else {
LOG_DBG("Failure while reading register 0x%04x", reg_addr);
*value = 0U;
}
}
static void eth_enc28j60_set_eth_reg(const struct device *dev,
uint16_t reg_addr,
uint8_t value)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
.len = 2
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
buf[0] = ENC28J60_SPI_BFS | (reg_addr & 0xFF);
buf[1] = value;
spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_clear_eth_reg(const struct device *dev,
uint16_t reg_addr,
uint8_t value)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[2];
const struct spi_buf tx_buf = {
.buf = buf,
.len = 2
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
buf[0] = ENC28J60_SPI_BFC | (reg_addr & 0xFF);
buf[1] = value;
spi_write_dt(&config->spi, &tx);
}
static void eth_enc28j60_write_mem(const struct device *dev,
uint8_t *data_buffer,
uint16_t buf_len)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[1] = { ENC28J60_SPI_WBM };
struct spi_buf tx_buf[2] = {
{
.buf = buf,
.len = 1
},
};
const struct spi_buf_set tx = {
.buffers = tx_buf,
.count = 2
};
uint16_t num_segments;
uint16_t num_remaining;
int i;
num_segments = buf_len / MAX_BUFFER_LENGTH;
num_remaining = buf_len - MAX_BUFFER_LENGTH * num_segments;
for (i = 0; i < num_segments; i++, data_buffer += MAX_BUFFER_LENGTH) {
tx_buf[1].buf = data_buffer;
tx_buf[1].len = MAX_BUFFER_LENGTH;
if (spi_write_dt(&config->spi, &tx)) {
LOG_ERR("Failed to write memory");
return;
}
}
if (num_remaining > 0) {
tx_buf[1].buf = data_buffer;
tx_buf[1].len = num_remaining;
if (spi_write_dt(&config->spi, &tx)) {
LOG_ERR("Failed to write memory");
}
}
}
static void eth_enc28j60_read_mem(const struct device *dev,
uint8_t *data_buffer,
uint16_t buf_len)
{
const struct eth_enc28j60_config *config = dev->config;
uint8_t buf[1] = { ENC28J60_SPI_RBM };
const struct spi_buf tx_buf = {
.buf = buf,
.len = 1
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1
};
struct spi_buf rx_buf[2] = {
{
.buf = NULL,
.len = 1
},
};
const struct spi_buf_set rx = {
.buffers = rx_buf,
.count = 2
};
uint16_t num_segments;
uint16_t num_remaining;
int i;
num_segments = buf_len / MAX_BUFFER_LENGTH;
num_remaining = buf_len - MAX_BUFFER_LENGTH * num_segments;
for (i = 0; i < num_segments; i++, data_buffer += MAX_BUFFER_LENGTH) {
rx_buf[1].buf = data_buffer;
rx_buf[1].len = MAX_BUFFER_LENGTH;
if (spi_transceive_dt(&config->spi, &tx, &rx)) {
LOG_ERR("Failed to read memory");
return;
}
}
if (num_remaining > 0) {
rx_buf[1].buf = data_buffer;
rx_buf[1].len = num_remaining;
if (spi_transceive_dt(&config->spi, &tx, &rx)) {
LOG_ERR("Failed to read memory");
}
}
}
static void eth_enc28j60_write_phy(const struct device *dev,
uint16_t reg_addr,
int16_t data)
{
uint8_t data_mistat;
eth_enc28j60_set_bank(dev, ENC28J60_REG_MIREGADR);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MIREGADR, reg_addr);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MIWRL, data & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MIWRH, data >> 8);
eth_enc28j60_set_bank(dev, ENC28J60_REG_MISTAT);
do {
/* wait 10.24 useconds */
k_busy_wait(D10D24S);
eth_enc28j60_read_reg(dev, ENC28J60_REG_MISTAT,
&data_mistat);
} while ((data_mistat & ENC28J60_BIT_MISTAT_BUSY));
}
static void eth_enc28j60_gpio_callback(const struct device *dev,
struct gpio_callback *cb,
uint32_t pins)
{
struct eth_enc28j60_runtime *context =
CONTAINER_OF(cb, struct eth_enc28j60_runtime, gpio_cb);
k_sem_give(&context->int_sem);
}
static void eth_enc28j60_init_buffers(const struct device *dev)
{
uint8_t data_estat;
/* Reception buffers initialization */
eth_enc28j60_set_bank(dev, ENC28J60_REG_ERXSTL);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXSTL,
ENC28J60_RXSTART & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXSTH,
ENC28J60_RXSTART >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXRDPTL,
ENC28J60_RXSTART & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXRDPTH,
ENC28J60_RXSTART >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXNDL,
ENC28J60_RXEND & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXNDH,
ENC28J60_RXEND >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXSTL,
ENC28J60_TXSTART & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXSTH,
ENC28J60_TXSTART >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXNDL,
ENC28J60_TXEND & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXNDH,
ENC28J60_TXEND >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERDPTL,
ENC28J60_RXSTART & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERDPTH,
ENC28J60_RXSTART >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_EWRPTL,
ENC28J60_TXSTART & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_EWRPTH,
ENC28J60_TXSTART >> 8);
eth_enc28j60_set_bank(dev, ENC28J60_REG_ERXFCON);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXFCON,
ENC28J60_RECEIVE_FILTERS);
/* Waiting for OST */
do {
/* wait 10.24 useconds */
k_busy_wait(D10D24S);
eth_enc28j60_read_reg(dev, ENC28J60_REG_ESTAT, &data_estat);
} while (!(data_estat & ENC28J60_BIT_ESTAT_CLKRDY));
}
static void eth_enc28j60_init_mac(const struct device *dev)
{
const struct eth_enc28j60_config *config = dev->config;
struct eth_enc28j60_runtime *context = dev->data;
uint8_t data_macon;
eth_enc28j60_set_bank(dev, ENC28J60_REG_MACON1);
/* Set MARXEN to enable MAC to receive frames */
eth_enc28j60_read_reg(dev, ENC28J60_REG_MACON1, &data_macon);
data_macon |= ENC28J60_BIT_MACON1_MARXEN | ENC28J60_BIT_MACON1_RXPAUS
| ENC28J60_BIT_MACON1_TXPAUS;
eth_enc28j60_write_reg(dev, ENC28J60_REG_MACON1, data_macon);
data_macon = ENC28J60_MAC_CONFIG;
if (config->full_duplex) {
data_macon |= ENC28J60_BIT_MACON3_FULDPX;
}
eth_enc28j60_write_reg(dev, ENC28J60_REG_MACON3, data_macon);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAIPGL, ENC28J60_MAC_NBBIPGL);
if (config->full_duplex) {
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAIPGH,
ENC28J60_MAC_NBBIPGH);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MABBIPG,
ENC28J60_MAC_BBIPG_FD);
} else {
eth_enc28j60_write_reg(dev, ENC28J60_REG_MABBIPG,
ENC28J60_MAC_BBIPG_HD);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MACON4, 1 << 6);
}
/* Configure MAC address */
eth_enc28j60_set_bank(dev, ENC28J60_REG_MAADR1);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAADR6,
context->mac_address[5]);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAADR5,
context->mac_address[4]);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAADR4,
context->mac_address[3]);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAADR3,
context->mac_address[2]);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAADR2,
context->mac_address[1]);
eth_enc28j60_write_reg(dev, ENC28J60_REG_MAADR1,
context->mac_address[0]);
}
static void eth_enc28j60_init_phy(const struct device *dev)
{
const struct eth_enc28j60_config *config = dev->config;
if (config->full_duplex) {
eth_enc28j60_write_phy(dev, ENC28J60_PHY_PHCON1,
ENC28J60_BIT_PHCON1_PDPXMD);
eth_enc28j60_write_phy(dev, ENC28J60_PHY_PHCON2, 0x0);
} else {
eth_enc28j60_write_phy(dev, ENC28J60_PHY_PHCON1, 0x0);
eth_enc28j60_write_phy(dev, ENC28J60_PHY_PHCON2,
ENC28J60_BIT_PHCON2_HDLDIS);
}
}
static struct net_if *get_iface(struct eth_enc28j60_runtime *ctx,
uint16_t vlan_tag)
{
#if defined(CONFIG_NET_VLAN)
struct net_if *iface;
iface = net_eth_get_vlan_iface(ctx->iface, vlan_tag);
if (!iface) {
return ctx->iface;
}
return iface;
#else
ARG_UNUSED(vlan_tag);
return ctx->iface;
#endif
}
static int eth_enc28j60_tx(const struct device *dev, struct net_pkt *pkt)
{
struct eth_enc28j60_runtime *context = dev->data;
uint16_t tx_bufaddr = ENC28J60_TXSTART;
uint16_t len = net_pkt_get_len(pkt);
uint8_t per_packet_control;
uint16_t tx_bufaddr_end;
struct net_buf *frag;
uint8_t tx_end;
LOG_DBG("pkt %p (len %u)", pkt, len);
k_sem_take(&context->tx_rx_sem, K_FOREVER);
/* Latest errata sheet: DS80349C
* always reset transmit logic (Errata Issue 12)
* the Microchip TCP/IP stack implementation used to first check
* whether TXERIF is set and only then reset the transmit logic
* but this has been changed in later versions; possibly they
* have a reason for this; they don't mention this in the errata
* sheet
*/
eth_enc28j60_set_eth_reg(dev, ENC28J60_REG_ECON1,
ENC28J60_BIT_ECON1_TXRST);
eth_enc28j60_clear_eth_reg(dev, ENC28J60_REG_ECON1,
ENC28J60_BIT_ECON1_TXRST);
/* Write the buffer content into the transmission buffer */
eth_enc28j60_set_bank(dev, ENC28J60_REG_ETXSTL);
eth_enc28j60_write_reg(dev, ENC28J60_REG_EWRPTL, tx_bufaddr & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_EWRPTH, tx_bufaddr >> 8);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXSTL, tx_bufaddr & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXSTH, tx_bufaddr >> 8);
/* Write the data into the buffer */
per_packet_control = ENC28J60_PPCTL_BYTE;
eth_enc28j60_write_mem(dev, &per_packet_control, 1);
for (frag = pkt->frags; frag; frag = frag->frags) {
eth_enc28j60_write_mem(dev, frag->data, frag->len);
}
tx_bufaddr_end = tx_bufaddr + len;
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXNDL,
tx_bufaddr_end & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ETXNDH, tx_bufaddr_end >> 8);
/* Signal ENC28J60 to send the buffer */
eth_enc28j60_set_eth_reg(dev, ENC28J60_REG_ECON1,
ENC28J60_BIT_ECON1_TXRTS);
do {
/* wait 10.24 useconds */
k_busy_wait(D10D24S);
eth_enc28j60_read_reg(dev, ENC28J60_REG_EIR, &tx_end);
tx_end &= ENC28J60_BIT_EIR_TXIF;
} while (!tx_end);
eth_enc28j60_read_reg(dev, ENC28J60_REG_ESTAT, &tx_end);
k_sem_give(&context->tx_rx_sem);
if (tx_end & ENC28J60_BIT_ESTAT_TXABRT) {
LOG_ERR("TX failed!");
return -EIO;
}
LOG_DBG("Tx successful");
return 0;
}
static void enc28j60_read_packet(const struct device *dev, uint16_t *vlan_tag,
uint16_t frm_len)
{
const struct eth_enc28j60_config *config = dev->config;
struct eth_enc28j60_runtime *context = dev->data;
struct net_buf *pkt_buf;
struct net_pkt *pkt;
uint16_t lengthfr;
uint8_t dummy[4];
/* Get the frame from the buffer */
pkt = net_pkt_rx_alloc_with_buffer(get_iface(context, *vlan_tag), frm_len,
AF_UNSPEC, 0, K_MSEC(config->timeout));
if (!pkt) {
LOG_ERR("Could not allocate rx buffer");
eth_stats_update_errors_rx(get_iface(context, *vlan_tag));
return;
}
pkt_buf = pkt->buffer;
lengthfr = frm_len;
do {
size_t frag_len;
uint8_t *data_ptr;
size_t spi_frame_len;
data_ptr = pkt_buf->data;
/* Review the space available for the new frag */
frag_len = net_buf_tailroom(pkt_buf);
if (frm_len > frag_len) {
spi_frame_len = frag_len;
} else {
spi_frame_len = frm_len;
}
eth_enc28j60_read_mem(dev, data_ptr, spi_frame_len);
net_buf_add(pkt_buf, spi_frame_len);
/* One fragment has been written via SPI */
frm_len -= spi_frame_len;
pkt_buf = pkt_buf->frags;
} while (frm_len > 0);
/* Let's pop the useless CRC */
eth_enc28j60_read_mem(dev, dummy, 4);
/* Pops one padding byte from spi circular buffer
* introduced by the device when the frame length is odd
*/
if (lengthfr & 0x01) {
eth_enc28j60_read_mem(dev, dummy, 1);
}
#if defined(CONFIG_NET_VLAN)
struct net_eth_hdr *hdr = NET_ETH_HDR(pkt);
if (ntohs(hdr->type) == NET_ETH_PTYPE_VLAN) {
struct net_eth_vlan_hdr *hdr_vlan =
(struct net_eth_vlan_hdr *)NET_ETH_HDR(pkt);
net_pkt_set_vlan_tci(pkt, ntohs(hdr_vlan->vlan.tci));
*vlan_tag = net_pkt_vlan_tag(pkt);
#if CONFIG_NET_TC_RX_COUNT > 1
enum net_priority prio;
prio = net_vlan2priority(net_pkt_vlan_priority(pkt));
net_pkt_set_priority(pkt, prio);
#endif
} else {
net_pkt_set_iface(pkt, context->iface);
}
#else /* CONFIG_NET_VLAN */
net_pkt_set_iface(pkt, context->iface);
#endif /* CONFIG_NET_VLAN */
/* Feed buffer frame to IP stack */
LOG_DBG("Received packet of length %u", lengthfr);
if (net_recv_data(net_pkt_iface(pkt), pkt) < 0) {
net_pkt_unref(pkt);
}
}
static int eth_enc28j60_rx(const struct device *dev, uint16_t *vlan_tag)
{
struct eth_enc28j60_runtime *context = dev->data;
uint8_t counter;
/* Errata 6. The Receive Packet Pending Interrupt Flag (EIR.PKTIF)
* does not reliably/accurately report the status of pending packet.
* Use EPKTCNT register instead.
*/
eth_enc28j60_set_bank(dev, ENC28J60_REG_EPKTCNT);
eth_enc28j60_read_reg(dev, ENC28J60_REG_EPKTCNT, &counter);
if (!counter) {
return 0;
}
k_sem_take(&context->tx_rx_sem, K_FOREVER);
do {
uint16_t frm_len = 0U;
uint8_t info[RSV_SIZE];
uint16_t next_packet;
uint8_t rdptl = 0U;
uint8_t rdpth = 0U;
/* remove read fifo address to packet header address */
eth_enc28j60_set_bank(dev, ENC28J60_REG_ERXRDPTL);
eth_enc28j60_read_reg(dev, ENC28J60_REG_ERXRDPTL, &rdptl);
eth_enc28j60_read_reg(dev, ENC28J60_REG_ERXRDPTH, &rdpth);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERDPTL, rdptl);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERDPTH, rdpth);
/* Read address for next packet */
eth_enc28j60_read_mem(dev, info, 2);
next_packet = info[0] | (uint16_t)info[1] << 8;
/* Errata 14. Even values in ERXRDPT
* may corrupt receive buffer.
No need adjust next packet
if (next_packet == 0) {
next_packet = ENC28J60_RXEND;
} else if (!(next_packet & 0x01)) {
next_packet--;
}*/
/* Read reception status vector */
eth_enc28j60_read_mem(dev, info, 4);
/* Get the frame length from the rx status vector,
* minus CRC size at the end which is always present
*/
frm_len = sys_get_le16(info) - 4;
enc28j60_read_packet(dev, vlan_tag, frm_len);
/* Free buffer memory and decrement rx counter */
eth_enc28j60_set_bank(dev, ENC28J60_REG_ERXRDPTL);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXRDPTL,
next_packet & 0xFF);
eth_enc28j60_write_reg(dev, ENC28J60_REG_ERXRDPTH,
next_packet >> 8);
eth_enc28j60_set_eth_reg(dev, ENC28J60_REG_ECON2,
ENC28J60_BIT_ECON2_PKTDEC);
/* Check if there are frames to clean from the buffer */
eth_enc28j60_set_bank(dev, ENC28J60_REG_EPKTCNT);
eth_enc28j60_read_reg(dev, ENC28J60_REG_EPKTCNT, &counter);
} while (counter);
k_sem_give(&context->tx_rx_sem);
return 0;
}
static void eth_enc28j60_rx_thread(const struct device *dev)
{
struct eth_enc28j60_runtime *context = dev->data;
uint16_t vlan_tag = NET_VLAN_TAG_UNSPEC;
uint8_t int_stat;
while (true) {
k_sem_take(&context->int_sem, K_FOREVER);
eth_enc28j60_read_reg(dev, ENC28J60_REG_EIR, &int_stat);
if (int_stat & ENC28J60_BIT_EIR_PKTIF) {
eth_enc28j60_rx(dev, &vlan_tag);
/* Clear rx interruption flag */
eth_enc28j60_clear_eth_reg(dev, ENC28J60_REG_EIR,
ENC28J60_BIT_EIR_PKTIF
| ENC28J60_BIT_EIR_RXERIF);
}
}
}
static enum ethernet_hw_caps eth_enc28j60_get_capabilities(const struct device *dev)
{
ARG_UNUSED(dev);
return ETHERNET_LINK_10BASE_T
#if defined(CONFIG_NET_VLAN)
| ETHERNET_HW_VLAN
#endif
;
}
static void eth_enc28j60_iface_init(struct net_if *iface)
{
const struct device *dev = net_if_get_device(iface);
struct eth_enc28j60_runtime *context = dev->data;
net_if_set_link_addr(iface, context->mac_address,
sizeof(context->mac_address),
NET_LINK_ETHERNET);
/* For VLAN, this value is only used to get the correct L2 driver.
* The iface pointer in context should contain the main interface
* if the VLANs are enabled.
*/
if (context->iface == NULL) {
context->iface = iface;
}
ethernet_init(iface);
}
static const struct ethernet_api api_funcs = {
.iface_api.init = eth_enc28j60_iface_init,
.get_capabilities = eth_enc28j60_get_capabilities,
.send = eth_enc28j60_tx,
};
static int eth_enc28j60_init(const struct device *dev)
{
const struct eth_enc28j60_config *config = dev->config;
struct eth_enc28j60_runtime *context = dev->data;
/* SPI config */
if (!spi_is_ready(&config->spi)) {
LOG_ERR("SPI master port %s not ready", config->spi.bus->name);
return -EINVAL;
}
/* Initialize GPIO */
if (!device_is_ready(config->interrupt.port)) {
LOG_ERR("GPIO port %s not ready", config->interrupt.port->name);
return -EINVAL;
}
if (gpio_pin_configure_dt(&config->interrupt, GPIO_INPUT)) {
LOG_ERR("Unable to configure GPIO pin %u",
config->interrupt.pin);
return -EINVAL;
}
gpio_init_callback(&(context->gpio_cb), eth_enc28j60_gpio_callback,
BIT(config->interrupt.pin));
if (gpio_add_callback(config->interrupt.port, &(context->gpio_cb))) {
return -EINVAL;
}
gpio_pin_interrupt_configure_dt(&config->interrupt,
GPIO_INT_EDGE_TO_ACTIVE);
if (eth_enc28j60_soft_reset(dev)) {
LOG_ERR("Soft-reset failed");
return -EIO;
}
/* Errata B7/1 */
k_busy_wait(D10D24S);
/* Assign octets not previously taken from devicetree */
context->mac_address[0] = MICROCHIP_OUI_B0;
context->mac_address[1] = MICROCHIP_OUI_B1;
context->mac_address[2] = MICROCHIP_OUI_B2;
eth_enc28j60_init_buffers(dev);
eth_enc28j60_init_mac(dev);
eth_enc28j60_init_phy(dev);
/* Enable interruptions */
eth_enc28j60_set_eth_reg(dev, ENC28J60_REG_EIE, ENC28J60_BIT_EIE_INTIE);
eth_enc28j60_set_eth_reg(dev, ENC28J60_REG_EIE, ENC28J60_BIT_EIE_PKTIE);
/* Enable Reception */
eth_enc28j60_set_eth_reg(dev, ENC28J60_REG_ECON1,
ENC28J60_BIT_ECON1_RXEN);
/* Start interruption-poll thread */
k_thread_create(&context->thread, context->thread_stack,
CONFIG_ETH_ENC28J60_RX_THREAD_STACK_SIZE,
(k_thread_entry_t)eth_enc28j60_rx_thread,
(void *)dev, NULL, NULL,
K_PRIO_COOP(CONFIG_ETH_ENC28J60_RX_THREAD_PRIO),
0, K_NO_WAIT);
LOG_INF("ENC28J60 Initialized");
return 0;
}
#ifdef CONFIG_ETH_ENC28J60_0
static struct eth_enc28j60_runtime eth_enc28j60_0_runtime = {
.mac_address = DT_INST_PROP(0, local_mac_address),
.tx_rx_sem = Z_SEM_INITIALIZER(eth_enc28j60_0_runtime.tx_rx_sem,
1, UINT_MAX),
.int_sem = Z_SEM_INITIALIZER(eth_enc28j60_0_runtime.int_sem,
0, UINT_MAX),
};
static const struct eth_enc28j60_config eth_enc28j60_0_config = {
.spi = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8), 0),
.interrupt = GPIO_DT_SPEC_INST_GET(0, int_gpios),
.full_duplex = IS_ENABLED(CONFIG_ETH_ENC28J60_0_FULL_DUPLEX),
.timeout = CONFIG_ETH_ENC28J60_TIMEOUT,
};
ETH_NET_DEVICE_DT_INST_DEFINE(0,
eth_enc28j60_init, NULL,
&eth_enc28j60_0_runtime, &eth_enc28j60_0_config,
CONFIG_ETH_INIT_PRIORITY, &api_funcs, NET_ETH_MTU);
#endif /* CONFIG_ETH_ENC28J60_0 */