# Copyright (c) 2019, Marc Reilly <marc@cpdesign.com.au>
# Copyright (c) 2019, PHYTEC Messtechnik GmbH
# SPDX-License-Identifier: Apache-2.0

description: ST7789V 320x240 display controller

compatible: "sitronix,st7789v"

include: [spi-device.yaml, display-controller.yaml]

properties:
    reset-gpios:
      type: phandle-array
      required: false
      description: |
        RESET pin.

        The RESET pin of ST7789V is active low.
        If connected directly the MCU pin should be configured
        as active low.

    cmd-data-gpios:
      type: phandle-array
      required: false
      description: |
        D/CX pin. If configured, 4-lines serial interface is used, otherwise
        3-lines serial interface is used and a D/CX bit (9-bit) is added to
        the protocol.

        The D/CX pin of ST7789V is active low (transmission command byte).
        If connected directly the MCU pin should be configured
        as active low.

    x-offset:
      type: int
      required: true
      description: The column offset in pixels of the LCD to the controller memory

    y-offset:
      type: int
      required: true
      description: The row offset in pixels of the LCD to the controller memory

    vcom:
      type: int
      required: true
      description: VCOM Setting

    gctrl:
      type: int
      required: true
      description: Gate Control

    vrhs:
      type: int
      required: false
      description: VRH Setting

    vdvs:
      type: int
      required: false
      description: VDV Setting

    mdac:
      type: int
      required: true
      description: Memory Data Access Control

    lcm:
      type: int
      required: true
      description: LCM Setting

    colmod:
      type: int
      required: true
      description: Interface Pixel Format

    gamma:
      type: int
      required: true
      description: Gamma Setting

    porch-param:
      type: uint8-array
      required: true
      description: Porch Setting

    cmd2en-param:
      type: uint8-array
      required: true
      description: Command 2 Enable Parameter

    pwctrl1-param:
      type: uint8-array
      required: true
      description: Power Control 1 Parameter

    pvgam-param:
      type: uint8-array
      required: true
      description: Positive Voltage Gamma Control Parameter

    nvgam-param:
      type: uint8-array
      required: true
      description: Negative Voltage Gamma Control Parameter

    ram-param:
      type: uint8-array
      required: true
      description: RAM Control Parameter

    rgb-param:
      type: uint8-array
      required: true
      description: RGB Interface Control Parameter