# Copyright 2022, NXP
# SPDX-License-Identifier: Apache-2.0

description: |
  RT600/RT500 pin control node. This node defines pin configurations in pin
  groups, and has the 'pinctrl' node identifier in the SOC's devicetree. Each
  group within the pin configuration defines a peripheral's pin configuration.
  Each numbered subgroup represents pins with shared configuration for that
  peripheral. The 'pinmux' property of each group selects the pins to be
  configured with these properties. For example, here is a configuration
  for FLEXCOMM0 pins:

  pinmux_flexcomm0_usart: pinmux_flexcomm0_usart {
    group0 {
      pinmux = <FC0_TXD_SCL_MISO_WS_PIO0_1>,
              <FC0_RXD_SDA_MOSI_DATA_PIO0_2>;
      slew-rate = "normal";
      drive-strength = "normal";
    };
  };

  If only the required properties are supplied, the ICON_PIO register will
  be assigned the following values:
  IOCON_FUNC=<pin mux selection>,
  IOCON_PUPDENA = 0,
  IOCON_PUPDSEL = 0,
  IOCON_IBENA = 0,
  IOCON_SLEWRATE = <slew-rate selection>,
  IOCON_FULLDRIVE = <drive-strength selection>,
  IOCON_AMENA = 0,
  IOCON_ODENA = 0,
  IOCON_IIENA = 0,

  Note the inherited pinctrl properties defined below have the following effects:
  drive-open-drain: IOCON_ODENA=1
  bias-pull-up: IOCON_PUPDENA=1, IOCON_PUPSEL=1
  bias-pull-down: IOCON_PUPDENA=1, IOCON_PUPSEL=0
  input-enable: IOCON_IBENA=1

compatible: "nxp,rt-iocon-pinctrl"

include:
  - name: base.yaml
  - name: pincfg-node-group.yaml
    child-binding:
      child-binding:
        property-allowlist:
          - drive-open-drain
          - bias-pull-up
          - bias-pull-down
          - input-enable

child-binding:
  description: iMX RT IOCON pin controller pin group
  child-binding:
    description: |
      iMX RT IOCON pin controller pin configuration node
    properties:
      pinmux:
        required: true
        type: array
        description: |
          Pin mux selection for this group. See the SOC level pinctrl header
          file in NXP's HAL for a defined list of these options.
      slew-rate:
        required: true
        type: string
        enum:
          - "normal"
          - "slow"
        description: |
          Pin output slew rate. Sets the SLEWRATE field in the IOCON register.
          0 SLEWRATE_0- normal mode, output slew rate is standard
          1 SLEWRATE_1- slow mode, output slew rate is slower
      drive-strength:
        required: true
        type: string
        enum:
          - "normal"
          - "high"
        description: |
          Pin output drive strength. Sets the FULLDRIVE field in the
          IOCON register.
          0 FULLDRIVE_0- Normal output drive mode
          1 FULLDRIVE_1- Full output drive mode, output strength is twice
          the drive strength of normal drive mode.
      nxp,invert:
        type: boolean
        description: |
          Invert the pin input logic level
      nxp,analog-mode:
        type: boolean
        description: |
          Set the pin to analog mode. Sets AMENA=1