blob: 7de1352879513739a1058d38308972b59a51f686 [file] [log] [blame]
// SPDX-License-Identifier: Apache-2.0
/*
* Copyright (c) 2021 Blue Clover
*/
/dts-v1/;
#include <nordic/nrf52832_qfaa.dtsi>
#include "blueclover_plt_demo_v2_nrf52832-pinctrl.dtsi"
/ {
model = "Blue Clover PLT Demo Board V2";
compatible = "nordic,blueclover-plt-demo-v2-nrf52832";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
buttons {
compatible = "gpio-keys";
button0: button_0 {
gpios = <&gpio0 26 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 0";
};
button1: button_1 {
gpios = <&gpio0 21 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 1";
};
};
/* These aliases are provided for compatibility with samples */
aliases {
sw0 = &button0;
sw1 = &button1;
pwm-buzzer = &pwm0;
watchdog0 = &wdt0;
accel0 = &bmi270;
};
};
&gpiote {
status ="okay";
};
&gpio0 {
status ="okay";
};
&uart0 {
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&i2c0 {
compatible = "nordic,nrf-twi";
status = "okay";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
sht3xd@44 {
compatible = "sensirion,sht3xd";
reg = <0x44>;
label = "SHT3XD";
};
bmi270: bmi270@68 {
compatible = "bosch,bmi270";
reg = <0x68>;
label = "BMI270";
};
};
&pwm0 {
/* buzzer */
status = "okay";
pinctrl-0 = <&pwm0_default>;
pinctrl-1 = <&pwm0_sleep>;
pinctrl-names = "default", "sleep";
};
&spi1 {
compatible = "nordic,nrf-spi";
status = "okay";
pinctrl-0 = <&spi1_default>;
pinctrl-1 = <&spi1_sleep>;
pinctrl-names = "default", "sleep";
apa102@0 {
compatible = "apa,apa102";
reg = <0>;
spi-max-frequency = <5250000>;
label = "APA102";
};
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0xc000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x32000>;
};
slot1_partition: partition@3e000 {
label = "image-1";
reg = <0x0003E000 0x32000>;
};
scratch_partition: partition@70000 {
label = "image-scratch";
reg = <0x00070000 0xa000>;
};
storage_partition: partition@7a000 {
label = "storage";
reg = <0x0007a000 0x00006000>;
};
};
};