blob: a397a6b2ce4b1ce762b4ff3be506113a84558b4e [file] [log] [blame]
/*
* Copyright (c) 2020 Laird Connectivity
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "bt510-pinctrl.dtsi"
/ {
model = "Laird Sentrius BT510 Sensor";
compatible = "lairdconnect,bt510";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
leds {
compatible = "gpio-leds";
led1a: led_1a {
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
label = "Green LED 1A";
};
led1b: led_1b {
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
label = "Red LED 1B";
};
};
buttons {
compatible = "gpio-keys";
button0: button_0 {
gpios = <&gpio1 10 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 1 (SW1)";
};
};
ids {
compatible = "gpio-keys";
id0: id_0 {
gpios = <&gpio1 2 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "ID 0";
};
id1: id_1 {
gpios = <&gpio1 1 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "ID 1";
};
id2: id_2 {
gpios = <&gpio0 25 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "ID 2";
};
};
tm {
compatible = "gpio-keys";
tm0: tm_0 {
gpios = <&gpio0 3 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Test mode (TM)";
};
};
mag {
compatible = "gpio-keys";
mag0: mag_0 {
compatible = "honeywell,sm351lt";
gpios = <&gpio1 14 0>;
label = "SM351LT_0";
};
};
/* These aliases are provided for compatibility with samples */
aliases {
led0 = &led1a;
led1 = &led1b;
sw0 = &button0;
mcuboot-button0 = &button0;
mcuboot-led0 = &led1a;
watchdog0 = &wdt0;
accel0 = &lis2dh12;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
status = "okay";
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
};
&i2c0 {
compatible = "nordic,nrf-twim";
status = "okay";
pinctrl-0 = <&i2c0_default>;
pinctrl-1 = <&i2c0_sleep>;
pinctrl-names = "default", "sleep";
lis2dh12: lis2dh12@18 {
compatible = "st,lis2dh12", "st,lis2dh";
reg = <0x18>;
irq-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>,
<&gpio1 12 GPIO_ACTIVE_HIGH>;
label = "LIS2DH12";
disconnect-sdo-sa0-pull-up;
};
si7055@40 {
compatible = "silabs,si7055";
reg = <0x40>;
label = "SI7055";
};
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* 96K */
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0x00018000>;
};
/* 396K */
slot0_partition: partition@18000 {
label = "image-0";
reg = <0x00018000 0x00063000>;
};
/* 396K */
slot1_partition: partition@7b000 {
label = "image-1";
reg = <0x0007b000 0x00063000>;
};
/* 8K */
scratch_partition: partition@de000 {
label = "image-scratch";
reg = <0x000de000 0x00002000>;
};
/*
* The flash starting at 0x000e0000 and ending at
* 0x000fffff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
/* 128K */
storage_partition: partition@e0000 {
label = "storage";
reg = <0x000e0000 0x00020000>;
};
};
};