boards/arm/efr32_radio/efr32_radio.dtsi

/*
 * Copyright (c) 2020 Piotr Mienkowski
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/ {
	chosen {
		zephyr,console = &usart0;
		zephyr,shell-uart = &usart0;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		sw0 = &button0;
		sw1 = &button1;
		watchdog0 = &wdog0;
		spi-flash0 = &mx25r80;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpiof 4 0>;
			label = "LED 0";
		};
		led1: led_1 {
			gpios = <&gpiof 5 0>;
			label = "LED 1";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			/* gpio flags need validation */
			gpios = <&gpiof 6 GPIO_ACTIVE_LOW>;
			label = "User Push Button 0";
		};
		button1: button_1 {
			/* gpio flags need validation */
			gpios = <&gpiof 7 GPIO_ACTIVE_LOW>;
			label = "User Push Button 1";
		};
	};

};

&usart0 {
	current-speed = <115200>;
	location-rx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>;
	location-tx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>;
	status = "okay";
};

&usart1 {
	compatible = "silabs,gecko-spi-usart";

	#address-cells = <1>;
	#size-cells = <0>;

	location-rx = <GECKO_LOCATION(11) GECKO_PORT_C GECKO_PIN(7)>;
	location-tx = <GECKO_LOCATION(11) GECKO_PORT_C GECKO_PIN(6)>;
	location-clk = <GECKO_LOCATION(11) GECKO_PORT_C GECKO_PIN(8)>;

	cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;

	status = "okay";

	mx25r80: mx25r8035f@0 {
		compatible = "jedec,spi-nor";
		label = "MX25R8035F";
		reg = <0>;
		spi-max-frequency = <33000000>;
		size = <0x800000>;
		jedec-id = [c2 28 14];
	};
};

&rtcc0 {
	prescaler = <1>;
	status = "okay";
};

&gpio {
	location-swo = <0>;
	status = "okay";
};

&gpioa {
	status = "okay";
};

&gpiob {
	status = "okay";
};

&gpioc {
	status = "okay";
};

&gpiod {
	status = "okay";
};

&gpiof {
	status = "okay";
};

&wdog0 {
	status = "okay";
};