/*
 * Copyright (c) 2013-2014 Wind River Systems, Inc.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file
 * @brief Linker command/script file
 *
 * Linker script for the Cortex-A and Cortex-R platforms.
 */

#include <zephyr/linker/sections.h>
#include <zephyr/devicetree.h>

#include <zephyr/linker/devicetree_regions.h>
#include <zephyr/linker/linker-defs.h>
#include <zephyr/linker/linker-tool.h>

/* physical address of RAM */
#ifdef CONFIG_XIP
  #define ROMABLE_REGION FLASH
  #define RAMABLE_REGION SRAM
#else
  #define ROMABLE_REGION SRAM
  #define RAMABLE_REGION SRAM
#endif

#if !defined(CONFIG_XIP) && (CONFIG_FLASH_SIZE == 0)
  #define ROM_ADDR RAM_ADDR
#else
  #define ROM_ADDR (CONFIG_FLASH_BASE_ADDRESS + CONFIG_FLASH_LOAD_OFFSET)
#endif

#if CONFIG_FLASH_LOAD_SIZE > 0
  #define ROM_SIZE CONFIG_FLASH_LOAD_SIZE
#else
  #define ROM_SIZE (CONFIG_FLASH_SIZE*1K - CONFIG_FLASH_LOAD_OFFSET)
#endif

#if defined(CONFIG_XIP)
  #if defined(CONFIG_IS_BOOTLOADER)
    #define RAM_SIZE (CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
    #define RAM_ADDR (CONFIG_SRAM_BASE_ADDRESS + \
                     (CONFIG_SRAM_SIZE * 1K - RAM_SIZE))
  #else
    #define RAM_SIZE (CONFIG_SRAM_SIZE * 1K)
    #define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
  #endif
#else
  #define RAM_SIZE (CONFIG_SRAM_SIZE * 1K - CONFIG_BOOTLOADER_SRAM_SIZE * 1K)
  #define RAM_ADDR CONFIG_SRAM_BASE_ADDRESS
#endif

/* Set alignment to CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE
 * to make linker section alignment comply with MPU granularity.
 */
#if defined(CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE)
_region_min_align = CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE;
#elif defined(CONFIG_ARM_AARCH32_MMU)
_region_min_align = CONFIG_MMU_PAGE_SIZE;
#else
/* If building without MPU/MMU support, use default 4-byte alignment. */
_region_min_align = 4;
#endif

#if defined(CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT)
  #define MPU_ALIGN(region_size) \
    . = ALIGN(_region_min_align); \
    . = ALIGN(1 << LOG2CEIL(region_size))
#else
  #define MPU_ALIGN(region_size) \
    . = ALIGN(_region_min_align)
#endif

#define BSS_ALIGN ALIGN(_region_min_align)

MEMORY
{
    FLASH    (rx) : ORIGIN = ROM_ADDR, LENGTH = ROM_SIZE
    SRAM     (wx) : ORIGIN = RAM_ADDR, LENGTH = RAM_SIZE
    LINKER_DT_REGIONS()
    /* Used by and documented in include/linker/intlist.ld */
    IDT_LIST (wx) : ORIGIN = 0xFFFFF7FF, LENGTH = 2K
}

ENTRY(CONFIG_KERNEL_ENTRY)

SECTIONS
{
#include <zephyr/linker/rel-sections.ld>

    /*
     * .plt and .iplt are here according to 'arm-zephyr-elf-ld --verbose',
     * before text section.
     */
    SECTION_PROLOGUE(.plt,,)
    {
        *(.plt)
    }

    SECTION_PROLOGUE(.iplt,,)
    {
        *(.iplt)
    }

    GROUP_START(ROMABLE_REGION)

#if defined(CONFIG_XIP)
    __rom_region_start = ROM_ADDR;
#else
    __rom_region_start = RAM_ADDR;
#endif

    SECTION_PROLOGUE(rom_start,,)
    {

/* Located in generated directory. This file is populated by calling
 * zephyr_linker_sources(ROM_START ...). This typically contains the vector
 * table and debug information.
 */
#include <snippets-rom-start.ld>

    } GROUP_LINK_IN(ROMABLE_REGION)

#ifdef CONFIG_CODE_DATA_RELOCATION

#include <linker_relocate.ld>

#endif /* CONFIG_CODE_DATA_RELOCATION */

    SECTION_PROLOGUE(_TEXT_SECTION_NAME,,)
    {
        . = ALIGN(_region_min_align);
        __text_region_start = .;
#ifndef CONFIG_XIP
        z_mapped_start = .;
#endif

#include <zephyr/linker/kobject-text.ld>

        *(.text)
        *(".text.*")
        *(.gnu.linkonce.t.*)

        /*
         * These are here according to 'arm-zephyr-elf-ld --verbose',
         * after .gnu.linkonce.t.*
         */
        *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)

        __text_region_end = .;
        . = ALIGN(_region_min_align);
    } GROUP_LINK_IN(ROMABLE_REGION)

#if defined (CONFIG_CPLUSPLUS)
    SECTION_PROLOGUE(.ARM.extab,,)
    {
        /*
         * .ARM.extab section containing exception unwinding information.
         */
        *(.ARM.extab* .gnu.linkonce.armextab.*)
    } GROUP_LINK_IN(ROMABLE_REGION)
#endif

    SECTION_PROLOGUE(.ARM.exidx,,)
    {
        /*
         * This section, related to stack and exception unwinding, is placed
         * explicitly to prevent it from being shared between multiple regions.
         * It  must be defined for gcc to support 64-bit math and avoid
         * section overlap.
         */
        __exidx_start = .;
#if defined (__GCC_LINKER_CMD__)
        *(.ARM.exidx* gnu.linkonce.armexidx.*)
#endif
        __exidx_end = .;
    } GROUP_LINK_IN(ROMABLE_REGION)

    SECTION_PROLOGUE(rodata_start,,)
    {
        . = ALIGN(_region_min_align);
        __rodata_region_start = .;
    } GROUP_LINK_IN(ROMABLE_REGION)

#include <zephyr/linker/common-rom.ld>
#include <zephyr/linker/thread-local-storage.ld>
#include <zephyr/linker/cplusplus-rom.ld>

    SECTION_PROLOGUE(_RODATA_SECTION_NAME,,)
    {
        *(.rodata)
        *(".rodata.*")
        *(.gnu.linkonce.r.*)

/* Located in generated directory. This file is populated by the
 * zephyr_linker_sources() Cmake function.
 */
#include <snippets-rodata.ld>

#include <zephyr/linker/kobject-rom.ld>

        /*
         * For XIP images, in order to avoid the situation when __data_rom_start
         * is 32-bit aligned, but the actual data is placed right after rodata
         * section, which may not end exactly at 32-bit border, pad rodata
         * section, so __data_rom_start points at data and it is 32-bit aligned.
         *
         * On non-XIP images this may enlarge image size up to 3 bytes. This
         * generally is not an issue, since modern ROM and FLASH memory is
         * usually 4k aligned.
         */
        . = ALIGN(4);

        /*
         * RODATA must be the last section so that the size of the entire read
         * only area will be filled to a power of 2.
         */
        MPU_ALIGN(ABSOLUTE(.) - __rom_region_start);
    } GROUP_LINK_IN(ROMABLE_REGION)

    __rodata_region_end = .;
    __rom_region_end = .;
    MPU_ALIGN(__rodata_region_end - __rom_region_start);
    _image_rom_end_order = (LOG2CEIL(__rom_region_end) - 1) << 1;

    GROUP_END(ROMABLE_REGION)

    /*
     * These are here according to 'arm-zephyr-elf-ld --verbose',
     * before data section.
     */
    SECTION_PROLOGUE(.got,,)
    {
        *(.got.plt)
        *(.igot.plt)
        *(.got)
        *(.igot)
    }

    GROUP_START(RAMABLE_REGION)

    . = RAM_ADDR;
    /* Align the start of image SRAM with the
     * minimum granularity required by MPU.
     */
    . = ALIGN(_region_min_align);
    _image_ram_start = .;
#ifdef CONFIG_XIP
    z_mapped_start = .;
#endif

/* Located in generated directory. This file is populated by the
 * zephyr_linker_sources() Cmake function.
 */
#include <snippets-ram-sections.ld>

#if defined(CONFIG_USERSPACE)
#define APP_SHARED_ALIGN . = ALIGN(_region_min_align);
#define SMEM_PARTITION_ALIGN MPU_ALIGN

#include <app_smem.ld>

    _app_smem_size = _app_smem_end - _app_smem_start;
    _app_smem_rom_start = LOADADDR(_APP_SMEM_SECTION_NAME);
#endif  /* CONFIG_USERSPACE */

    SECTION_DATA_PROLOGUE(_BSS_SECTION_NAME,(NOLOAD), BSS_ALIGN)
    {
        /*
         * For performance, BSS section is assumed to be 4 byte aligned and
         * a multiple of 4 bytes
         */
        . = ALIGN(4);
        __bss_start = .;
        __kernel_ram_start = .;

        *(.bss)
        *(".bss.*")
        *(COMMON)
        *(".kernel_bss.*")

#ifdef CONFIG_CODE_DATA_RELOCATION
#include <linker_sram_bss_relocate.ld>
#endif

        /*
         * As memory is cleared in words only, it is simpler to ensure the BSS
         * section ends on a 4 byte boundary. This wastes a maximum of 3 bytes.
         */
        __bss_end = ALIGN(4);
    } GROUP_DATA_LINK_IN(RAMABLE_REGION, RAMABLE_REGION)

#include <zephyr/linker/common-noinit.ld>

    SECTION_DATA_PROLOGUE(_DATA_SECTION_NAME,,)
    {
        __data_region_start = .;
        __data_start = .;
        *(.data)
        *(".data.*")
        *(".kernel.*")

/* Located in generated directory. This file is populated by the
 * zephyr_linker_sources() Cmake function.
 */
#include <snippets-rwdata.ld>

#ifdef CONFIG_CODE_DATA_RELOCATION
#include <linker_sram_data_relocate.ld>
#endif
        __data_end = .;

    } GROUP_DATA_LINK_IN(RAMABLE_REGION, ROMABLE_REGION)
    __data_size = __data_end - __data_start;
    __data_load_start = LOADADDR(_DATA_SECTION_NAME);

    __data_region_load_start = LOADADDR(_DATA_SECTION_NAME);

#include <zephyr/linker/common-ram.ld>
#include <zephyr/linker/kobject-data.ld>
#include <zephyr/linker/cplusplus-ram.ld>

/* Located in generated directory. This file is populated by the
 * zephyr_linker_sources() Cmake function.
 */
#include <snippets-data-sections.ld>

    __data_region_end = .;


    /* Define linker symbols */

    . = ALIGN(_region_min_align);
    _image_ram_end = .;
    _end = .; /* end of image */
    z_mapped_end = .;

    __kernel_ram_end = RAM_ADDR + RAM_SIZE;
    __kernel_ram_size = __kernel_ram_end - __kernel_ram_start;

    GROUP_END(RAMABLE_REGION)

#if DT_NODE_HAS_STATUS(DT_CHOSEN(zephyr_ocm), okay)
GROUP_START(OCM)

	SECTION_PROLOGUE(_OCM_BSS_SECTION_NAME, (NOLOAD),SUBALIGN(4))
	{
		__ocm_start = .;
		__ocm_bss_start = .;
		*(.ocm_bss)
		*(".ocm_bss.*")
		__ocm_bss_end = .;
	} GROUP_LINK_IN(LINKER_DT_NODE_REGION_NAME(DT_CHOSEN(zephyr_ocm)))

	SECTION_PROLOGUE(_OCM_DATA_SECTION_NAME,,SUBALIGN(4))
	{
		__ocm_data_start = .;
		*(.ocm_data)
		*(".ocm_data.*")
		__ocm_data_end = .;
	} GROUP_LINK_IN(LINKER_DT_NODE_REGION_NAME(DT_CHOSEN(zephyr_ocm)))

  __ocm_end = .;
  __ocm_size = __ocm_end - __ocm_start;

GROUP_END(OCM)
#endif

/* Located in generated directory. This file is populated by the
 * zephyr_linker_sources() Cmake function.
 */
#include <snippets-sections.ld>

#include <zephyr/linker/debug-sections.ld>

    SECTION_PROLOGUE(.ARM.attributes, 0,)
    {
        KEEP(*(.ARM.attributes))
        KEEP(*(.gnu.attributes))
    }

    /* Sections generated from 'zephyr,memory-region' nodes */
    LINKER_DT_SECTIONS()

    /* Must be last in romable region */
    SECTION_PROLOGUE(.last_section,(NOLOAD),)
    {
    } GROUP_LINK_IN(ROMABLE_REGION)

    /* To provide the image size as a const expression,
     * calculate this value here. */
    _flash_used = LOADADDR(.last_section) - __rom_region_start;

}