| /* |
| * Copyright (c) 2020, Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef NRFX_CONFIG_NRF52805_H__ |
| #define NRFX_CONFIG_NRF52805_H__ |
| |
| #ifndef NRFX_CONFIG_H__ |
| #error "This file should not be included directly. Include nrfx_config.h instead." |
| #endif |
| |
| // <<< Use Configuration Wizard in Context Menu >>>\n |
| |
| // <h> nRF_Drivers |
| |
| // <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver |
| //========================================================== |
| #ifndef NRFX_CLOCK_ENABLED |
| #define NRFX_CLOCK_ENABLED 0 |
| #endif |
| // <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source |
| |
| // <0=> RC |
| // <1=> XTAL |
| // <2=> Synth |
| // <131073=> External Low Swing |
| // <196609=> External Full Swing |
| |
| #ifndef NRFX_CLOCK_CONFIG_LF_SRC |
| #define NRFX_CLOCK_CONFIG_LF_SRC 1 |
| #endif |
| |
| // <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED - Enables LF Clock Calibration Support |
| |
| #ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED |
| #define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_CLOCK_CONFIG_CT_ENABLED - Enables Calibration Timer Support |
| |
| #ifndef NRFX_CLOCK_CONFIG_CT_ENABLED |
| #define NRFX_CLOCK_CONFIG_CT_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED - Enables two-stage LFXO start procedure |
| |
| // <i> If set to a non-zero value, LFRC will be started before LFXO and corresponding |
| // <i> event will be generated. It means that CPU will be woken up when LFRC |
| // <i> oscillator starts, but user callback will be invoked only after LFXO |
| // <i> finally starts. |
| |
| #ifndef NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED |
| #define NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED |
| #define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL |
| #define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_CLOCK_CONFIG_INFO_COLOR |
| #define NRFX_CLOCK_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR |
| #define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_EGU_ENABLED - nrfx_egu - EGU peripheral driver. |
| //========================================================== |
| #ifndef NRFX_EGU_ENABLED |
| #define NRFX_EGU_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU0_ENABLED - Enable EGU0 instance. |
| |
| #ifndef NRFX_EGU0_ENABLED |
| #define NRFX_EGU0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU1_ENABLED - Enable EGU1 instance. |
| |
| #ifndef NRFX_EGU1_ENABLED |
| #define NRFX_EGU1_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver |
| //========================================================== |
| #ifndef NRFX_GPIOTE_ENABLED |
| #define NRFX_GPIOTE_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS - Number of dedicated handlers |
| #ifndef NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS |
| #define NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS 1 |
| #endif |
| |
| // <o> NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED |
| #define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL |
| #define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR |
| #define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR |
| #define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver |
| //========================================================== |
| #ifndef NRFX_NVMC_ENABLED |
| #define NRFX_NVMC_ENABLED 0 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver |
| //========================================================== |
| #ifndef NRFX_POWER_ENABLED |
| #define NRFX_POWER_ENABLED 0 |
| #endif |
| // <o> NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator |
| //========================================================== |
| #ifndef NRFX_PPI_ENABLED |
| #define NRFX_PPI_ENABLED 0 |
| #endif |
| // <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PPI_CONFIG_LOG_ENABLED |
| #define NRFX_PPI_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PPI_CONFIG_LOG_LEVEL |
| #define NRFX_PPI_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PPI_CONFIG_INFO_COLOR |
| #define NRFX_PPI_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PPI_CONFIG_DEBUG_COLOR |
| #define NRFX_PPI_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module |
| //========================================================== |
| #ifndef NRFX_PRS_ENABLED |
| #define NRFX_PRS_ENABLED 0 |
| #endif |
| // <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_0_ENABLED |
| #define NRFX_PRS_BOX_0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_1_ENABLED |
| #define NRFX_PRS_BOX_1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_2_ENABLED |
| #define NRFX_PRS_BOX_2_ENABLED 0 |
| #endif |
| |
| |
| // <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PRS_CONFIG_LOG_ENABLED |
| #define NRFX_PRS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PRS_CONFIG_LOG_LEVEL |
| #define NRFX_PRS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PRS_CONFIG_INFO_COLOR |
| #define NRFX_PRS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PRS_CONFIG_DEBUG_COLOR |
| #define NRFX_PRS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver |
| //========================================================== |
| #ifndef NRFX_QDEC_ENABLED |
| #define NRFX_QDEC_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_QDEC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_QDEC_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_QDEC_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_QDEC_CONFIG_LOG_ENABLED |
| #define NRFX_QDEC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_QDEC_CONFIG_LOG_LEVEL |
| #define NRFX_QDEC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_QDEC_CONFIG_INFO_COLOR |
| #define NRFX_QDEC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR |
| #define NRFX_QDEC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver |
| //========================================================== |
| #ifndef NRFX_RNG_ENABLED |
| #define NRFX_RNG_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_RNG_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_RNG_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_RNG_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_RNG_CONFIG_LOG_ENABLED |
| #define NRFX_RNG_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_RNG_CONFIG_LOG_LEVEL |
| #define NRFX_RNG_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RNG_CONFIG_INFO_COLOR |
| #define NRFX_RNG_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RNG_CONFIG_DEBUG_COLOR |
| #define NRFX_RNG_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver |
| //========================================================== |
| #ifndef NRFX_RTC_ENABLED |
| #define NRFX_RTC_ENABLED 0 |
| #endif |
| // <q> NRFX_RTC0_ENABLED - Enable RTC0 instance |
| |
| #ifndef NRFX_RTC0_ENABLED |
| #define NRFX_RTC0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_RTC1_ENABLED - Enable RTC1 instance |
| |
| #ifndef NRFX_RTC1_ENABLED |
| #define NRFX_RTC1_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_RTC_CONFIG_LOG_ENABLED |
| #define NRFX_RTC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_RTC_CONFIG_LOG_LEVEL |
| #define NRFX_RTC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RTC_CONFIG_INFO_COLOR |
| #define NRFX_RTC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RTC_CONFIG_DEBUG_COLOR |
| #define NRFX_RTC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver |
| //========================================================== |
| #ifndef NRFX_SAADC_ENABLED |
| #define NRFX_SAADC_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SAADC_CONFIG_LOG_ENABLED |
| #define NRFX_SAADC_CONFIG_LOG_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SAADC_CONFIG_LOG_LEVEL |
| #define NRFX_SAADC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SAADC_CONFIG_INFO_COLOR |
| #define NRFX_SAADC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR |
| #define NRFX_SAADC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver |
| //========================================================== |
| #ifndef NRFX_SPIM_ENABLED |
| #define NRFX_SPIM_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIM0_ENABLED - Enable SPIM0 instance |
| |
| #ifndef NRFX_SPIM0_ENABLED |
| #define NRFX_SPIM0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPIM_CONFIG_LOG_ENABLED |
| #define NRFX_SPIM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPIM_CONFIG_LOG_LEVEL |
| #define NRFX_SPIM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIM_CONFIG_INFO_COLOR |
| #define NRFX_SPIM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR |
| #define NRFX_SPIM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver |
| //========================================================== |
| #ifndef NRFX_SPIS_ENABLED |
| #define NRFX_SPIS_ENABLED 0 |
| #endif |
| // <q> NRFX_SPIS0_ENABLED - Enable SPIS0 instance |
| |
| |
| #ifndef NRFX_SPIS0_ENABLED |
| #define NRFX_SPIS0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPIS_CONFIG_LOG_ENABLED |
| #define NRFX_SPIS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPIS_CONFIG_LOG_LEVEL |
| #define NRFX_SPIS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIS_CONFIG_INFO_COLOR |
| #define NRFX_SPIS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR |
| #define NRFX_SPIS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver |
| //========================================================== |
| #ifndef NRFX_SPI_ENABLED |
| #define NRFX_SPI_ENABLED 0 |
| #endif |
| // <q> NRFX_SPI0_ENABLED - Enable SPI0 instance |
| |
| |
| #ifndef NRFX_SPI0_ENABLED |
| #define NRFX_SPI0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPI_CONFIG_LOG_ENABLED |
| #define NRFX_SPI_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPI_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPI_CONFIG_LOG_LEVEL |
| #define NRFX_SPI_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPI_CONFIG_INFO_COLOR |
| #define NRFX_SPI_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPI_CONFIG_DEBUG_COLOR |
| #define NRFX_SPI_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <q> NRFX_SYSTICK_ENABLED - nrfx_systick - ARM(R) SysTick driver |
| |
| |
| #ifndef NRFX_SYSTICK_ENABLED |
| #define NRFX_SYSTICK_ENABLED 0 |
| #endif |
| |
| // <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver |
| //========================================================== |
| #ifndef NRFX_TEMP_ENABLED |
| #define NRFX_TEMP_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER peripheral driver |
| //========================================================== |
| #ifndef NRFX_TIMER_ENABLED |
| #define NRFX_TIMER_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TIMER0_ENABLED - Enable TIMER0 instance |
| |
| #ifndef NRFX_TIMER0_ENABLED |
| #define NRFX_TIMER0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TIMER1_ENABLED - Enable TIMER1 instance |
| |
| #ifndef NRFX_TIMER1_ENABLED |
| #define NRFX_TIMER1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TIMER2_ENABLED - Enable TIMER2 instance |
| |
| #ifndef NRFX_TIMER2_ENABLED |
| #define NRFX_TIMER2_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TIMER_CONFIG_LOG_ENABLED |
| #define NRFX_TIMER_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TIMER_CONFIG_LOG_LEVEL |
| #define NRFX_TIMER_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TIMER_CONFIG_INFO_COLOR |
| #define NRFX_TIMER_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR |
| #define NRFX_TIMER_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver |
| //========================================================== |
| #ifndef NRFX_TWIM_ENABLED |
| #define NRFX_TWIM_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIM0_ENABLED - Enable TWIM0 instance |
| |
| #ifndef NRFX_TWIM0_ENABLED |
| #define NRFX_TWIM0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWIM_CONFIG_LOG_ENABLED |
| #define NRFX_TWIM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWIM_CONFIG_LOG_LEVEL |
| #define NRFX_TWIM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIM_CONFIG_INFO_COLOR |
| #define NRFX_TWIM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR |
| #define NRFX_TWIM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver |
| //========================================================== |
| #ifndef NRFX_TWIS_ENABLED |
| #define NRFX_TWIS_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIS0_ENABLED - Enable TWIS0 instance |
| |
| #ifndef NRFX_TWIS0_ENABLED |
| #define NRFX_TWIS0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once |
| |
| // <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. |
| |
| #ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY |
| #define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0 |
| #endif |
| |
| // <q> NRFX_TWIS_NO_SYNC_MODE - Remove support for synchronous mode |
| |
| // <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. |
| |
| #ifndef NRFX_TWIS_NO_SYNC_MODE |
| #define NRFX_TWIS_NO_SYNC_MODE 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWIS_CONFIG_LOG_ENABLED |
| #define NRFX_TWIS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWIS_CONFIG_LOG_LEVEL |
| #define NRFX_TWIS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIS_CONFIG_INFO_COLOR |
| #define NRFX_TWIS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR |
| #define NRFX_TWIS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver |
| //========================================================== |
| #ifndef NRFX_TWI_ENABLED |
| #define NRFX_TWI_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWI0_ENABLED - Enable TWI0 instance |
| |
| #ifndef NRFX_TWI0_ENABLED |
| #define NRFX_TWI0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWI_CONFIG_LOG_ENABLED |
| #define NRFX_TWI_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWI_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWI_CONFIG_LOG_LEVEL |
| #define NRFX_TWI_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWI_CONFIG_INFO_COLOR |
| #define NRFX_TWI_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWI_CONFIG_DEBUG_COLOR |
| #define NRFX_TWI_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver |
| //========================================================== |
| #ifndef NRFX_UARTE_ENABLED |
| #define NRFX_UARTE_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance |
| |
| #ifndef NRFX_UARTE0_ENABLED |
| #define NRFX_UARTE0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_UARTE_CONFIG_LOG_ENABLED |
| #define NRFX_UARTE_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_UARTE_CONFIG_LOG_LEVEL |
| #define NRFX_UARTE_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UARTE_CONFIG_INFO_COLOR |
| #define NRFX_UARTE_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR |
| #define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver |
| //========================================================== |
| #ifndef NRFX_UART_ENABLED |
| #define NRFX_UART_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_UART0_ENABLED - Enable UART0 instance |
| |
| #ifndef NRFX_UART0_ENABLED |
| #define NRFX_UART0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_UART_CONFIG_LOG_ENABLED |
| #define NRFX_UART_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_UART_CONFIG_LOG_LEVEL |
| #define NRFX_UART_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UART_CONFIG_INFO_COLOR |
| #define NRFX_UART_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UART_CONFIG_DEBUG_COLOR |
| #define NRFX_UART_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver |
| //========================================================== |
| #ifndef NRFX_WDT_ENABLED |
| #define NRFX_WDT_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_WDT0_ENABLED - Enable WDT0 instance |
| |
| #ifndef NRFX_WDT0_ENABLED |
| #define NRFX_WDT0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver |
| |
| // <0=> Include WDT IRQ handling |
| // <1=> Remove WDT IRQ handling |
| |
| #ifndef NRFX_WDT_CONFIG_NO_IRQ |
| #define NRFX_WDT_CONFIG_NO_IRQ 0 |
| #endif |
| |
| // <o> NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_WDT_CONFIG_LOG_ENABLED |
| #define NRFX_WDT_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_WDT_CONFIG_LOG_LEVEL |
| #define NRFX_WDT_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_WDT_CONFIG_INFO_COLOR |
| #define NRFX_WDT_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_WDT_CONFIG_DEBUG_COLOR |
| #define NRFX_WDT_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // </h> |
| |
| #endif // NRFX_CONFIG_NRF52805_H__ |