# Copyright 2020-2023 NXP
# Copyright (c) 2021 Basalte bv
# Copyright (c) 2023, ithinx GmbH
# Copyright (c) 2023, Tonies GmbH
# SPDX-License-Identifier: Apache-2.0

if DT_HAS_NXP_IMX_FLEXSPI_ENABLED

config MEMC_MCUX_FLEXSPI_W956A8MBYA
	bool "MCUX FlexSPI Winbond W956A8MBYA HyperRAM driver"
	default y
	depends on DT_HAS_NXP_IMX_FLEXSPI_W956A8MBYA_ENABLED
	select MEMC_MCUX_FLEXSPI

config MEMC_MCUX_FLEXSPI_S27KS0641
	bool "MCUX FlexSPI Cypress S27KS0641 HyperRAM driver"
	default y
	depends on DT_HAS_NXP_IMX_FLEXSPI_S27KS0641_ENABLED
	select MEMC_MCUX_FLEXSPI

config MEMC_MCUX_FLEXSPI_APS6408L
	bool "MCUX FlexSPI AP Memory APS6408L pSRAM driver"
	default y
	depends on DT_HAS_NXP_IMX_FLEXSPI_APS6408L_ENABLED
	select MEMC_MCUX_FLEXSPI

config MEMC_MCUX_FLEXSPI_IS66WVQ8M4
	bool "MCUX FlexSPI ISSI IS66WVQ8M4 pSRAM driver"
	default y
	depends on DT_HAS_NXP_IMX_FLEXSPI_IS66WVQ8M4_ENABLED
	select MEMC_MCUX_FLEXSPI

config MEMC_MCUX_FLEXSPI_APS6404L
	bool "MCUX FlexSPI AP Memory APS6404L pSRAM driver"
	default y
	depends on DT_HAS_NXP_IMX_FLEXSPI_APS6404L_ENABLED
	select MEMC_MCUX_FLEXSPI

config MEMC_MCUX_FLEXSPI_INIT_PRIORITY
	int "MCUX FLEXSPI MEMC driver initialization priority"
	default MEMC_INIT_PRIORITY
	help
	  Initialization priority for FlexSPI MEMC driver. In cases where the
	  flash driver must initialize before the MEMC RAM driver,
	  initialization priorities can be set such that
	  MEMC_MCUX_FLEXSPI_INIT_PRIORITY < FLASH_INIT_PRIORITY <
	  MEMC_INIT_PRIORITY

config MEMC_MCUX_FLEXSPI_INIT_XIP
	bool "Initialize FLEXSPI when using device for XIP"
	help
	  Initialize the FLEXSPI device even when using it for XIP. If this
	  Kconfig is enabled, the user must ensure that the pin control
	  state used does not reconfigure the pins used to interface with
	  the flash device used for XIP, and that the configuration settings
	  used for the FLEXSPI are compatible with those needed for XIP from
	  the flash device.

config MEMC_MCUX_FLEXSPI
	bool
	select PINCTRL

# Avoid RWW hazards by defaulting logging to disabled
choice MEMC_LOG_LEVEL_CHOICE
	default MEMC_LOG_LEVEL_OFF if FLASH_MCUX_FLEXSPI_XIP
endchoice

endif # DT_HAS_NXP_IMX_FLEXSPI_ENABLED


if DT_HAS_NXP_FLEXRAM_ENABLED

config MEMC_NXP_FLEXRAM
	bool
	default y

config MEMC_NXP_FLEXRAM_MAGIC_ADDR_API
	bool "NXP FlexRAM magic addr API"
	help
	  Enable API to use flexRAM magic address functionality

config MEMC_NXP_FLEXRAM_ERROR_INTERRUPT
	bool "NXP FlexRAM error interrupt"
	help
	  Allow flexram to generate error interrupts

endif # DT_HAS_NXP_FLEXRAM_ENABLED