/*
 * Copyright (c) 2019 SEAL AG
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <zephyr/dt-bindings/clock/kinetis_mcg.h>
#include <zephyr/dt-bindings/clock/kinetis_sim.h>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/i2c/i2c.h>

/ {
	aliases {
		watchdog0 = &wdog;
	};

	chosen {
		zephyr,entropy = &trng;
		zephyr,flash-controller = &ftfa;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m4f";
			reg = <0>;
		};
	};

	/* Dummy pinctrl node, filled with pin mux options at board level */
	pinctrl: pinctrl {
		compatible = "nxp,kinetis-pinctrl";
		status = "okay";
	};

	soc {
		mpu: mpu@4000d000 {
			compatible = "nxp,kinetis-mpu";
			reg = <0x4000d000 0x1000>;
			status = "disabled";
		};

		sim: sim@40047000 {
			compatible = "nxp,kinetis-sim";
			reg = <0x40047000 0x2000>;
			#clock-cells = <3>;

			core_clk {
				compatible = "fixed-factor-clock";
				clocks = <&mcg KINETIS_MCG_OUT_CLK>;
				clock-div = <1>;
				#clock-cells = <0>;
			};

			bus_clk {
				compatible = "fixed-factor-clock";
				clocks = <&mcg KINETIS_MCG_OUT_CLK>;
				clock-div = <2>;
				#clock-cells = <0>;
			};

			flexbus_clk {
				compatible = "fixed-factor-clock";
				clocks = <&mcg KINETIS_MCG_OUT_CLK>;
				clock-div = <2>;
				#clock-cells = <0>;
			};

			flash_clk {
				compatible = "fixed-factor-clock";
				clocks = <&mcg KINETIS_MCG_OUT_CLK>;
				clock-div = <5>;
				#clock-cells = <0>;
			};
		};

		mcg: clock-controller@40064000 {
			compatible = "nxp,kinetis-mcg";
			reg = <0x40064000 0x1000>;
			#clock-cells = <1>;
		};

		osc: clock-controller@40065000 {
			compatible = "nxp,k8x-osc";
			reg = <0x40065000 0x4>;
			enable-external-reference;
		};

		ftfa: flash-controller@40020000 {
			compatible = "nxp,kinetis-ftfa";
			reg = <0x40020000 0x1000>;
			interrupts = <18 0>, <19 0>;
			interrupt-names = "command-complete", "read-collision";
			status = "okay";

			#address-cells = <1>;
			#size-cells = <1>;
		};

		adc0: adc@4003b000 {
			compatible = "nxp,kinetis-adc16";
			reg = <0x4003b000 0x1000>;
			clocks = <&sim KINETIS_SIM_SIM_SOPT7 0 0xF>,
				<&sim KINETIS_SIM_SIM_SOPT7 7 0x80>;
			interrupts = <39 0>;
			dmas = <&edma0 0 40>;
			dma-names = "adc0";
			clk-source = <0>;
			status = "disabled";
			#io-channel-cells = <1>;
		};

		gpioa: gpio@400ff000 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff000 0x40>;
			interrupts = <59 2>;
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&porta>;
		};

		gpiob: gpio@400ff040 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff040 0x40>;
			interrupts = <60 2>;
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&portb>;
		};

		gpioc: gpio@400ff080 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff080 0x40>;
			interrupts = <61 2>;
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&portc>;
		};

		gpiod: gpio@400ff0c0 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff0c0 0x40>;
			interrupts = <62 2>;
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&portd>;
		};

		gpioe: gpio@400ff100 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff100 0x40>;
			interrupts = <63 2>;
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&porte>;
		};

		i2c0: i2c@40066000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40066000 0x1000>;
			interrupts = <24 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>;
			status = "disabled";
		};

		i2c1: i2c@40067000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40067000 0x1000>;
			interrupts = <25 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 7>;
			status = "disabled";
		};

		i2c2: i2c@400e6000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x400e6000 0x1000>;
			interrupts = <74 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1028 6>;
			status = "disabled";
		};

		i2c3: i2c@400e7000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x400e7000 0x1000>;
			interrupts = <91 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1028 7>;
			status = "disabled";
		};

		lpuart0: lpuart@400c4000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c4000 0x1000>;
			interrupts = <30 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 4>;
			dmas = <&edma0 1 2>, <&edma0 2 3>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		lpuart1: lpuart@400c5000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c5000 0x1000>;
			interrupts = <31 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 5>;
			dmas = <&edma0 3 4>, <&edma0 4 5>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		lpuart2: lpuart@400c6000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c6000 0x1000>;
			interrupts = <32 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 6>;
			dmas = <&edma0 5 6>, <&edma0 6 7>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		lpuart3: lpuart@400c7000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c7000 0x1000>;
			interrupts = <33 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 7>;
			dmas = <&edma0 7 8>, <&edma0 8 9>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		lpuart4: lpuart@400d6000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400d6000 0x1000>;
			interrupts = <34 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 22>;
			dmas = <&edma0 9 10>, <&edma0 10 11>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		porta: pinmux@40049000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x40049000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>;
		};

		portb: pinmux@4004a000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004a000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>;
		};

		portc: pinmux@4004b000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004b000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>;
		};

		portd: pinmux@4004c000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004c000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 12>;
		};

		porte: pinmux@4004d000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004d000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 13>;
		};

		ftm0: ftm@40038000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40038000 0x1000>;
			interrupts = <42 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			status = "disabled";
		};

		ftm1: ftm@40039000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40039000 0x1000>;
			interrupts = <43 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			status = "disabled";
		};

		ftm2: ftm@4003a000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x4003a000 0x1000>;
			interrupts = <44 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			status = "disabled";
		};

		ftm3: ftm@400b9000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x400b9000 0x1000>;
			interrupts = <71 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			status = "disabled";
		};

		rtc: rtc@4003d000 {
			compatible = "nxp,kinetis-rtc";
			reg = <0x4003d000 0x1000>;
			interrupts = <46 0>, <47 0>;
			interrupt-names = "alarm", "seconds";
			clock-frequency = <32768>;
			prescaler = <32768>;
		};

		spi0: spi@4002c000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x4002c000 0x1000>;
			interrupts = <26 3>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 12>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		spi1: spi@4002d000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x4002d000 0x1000>;
			interrupts = <27 3>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 13>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		spi2: spi@400ac000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x400ac000 0x1000>;
			interrupts = <65 3>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1030 12>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		trng: random@400a0000 {
			compatible = "nxp,kinetis-trng";
			reg = <0x400a0000 0x1000>;
			interrupts = <23 0>;
		};

		usbotg: usbd@40072000 {
			compatible = "nxp,kinetis-usbd";
			reg = <0x40072000 0x1000>;
			interrupts = <53 1>;
			interrupt-names = "usb_otg";
			num-bidir-endpoints = <16>;
			status = "disabled";
		};

		wdog: watchdog@40052000 {
			compatible = "nxp,kinetis-wdog";
			reg = <0x40052000 0x1000>;
			interrupts = <22 0>;
			clocks = <&sim KINETIS_SIM_LPO_CLK 0 0>;
		};

		pit0: pit@40037000 {
			compatible = "nxp,kinetis-pit";
			reg = <0x40037000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 23>;
			interrupts = <48 0>, <49 0>, <50 0>, <51 0>;
			status = "disabled";
			pit-channel = <0>;
			pit-period = <1000000>;
			clock-frequency = <60000000>;
		};

		edma0: dma-controller@40008000 {
			#dma-cells = <2>;
			compatible = "nxp,mcux-edma";
			dma-channels = <16>;
			dma-requests = <64>;
			nxp,mem2mem;
			reg = <0x40008000 0x1000>,
				<0x40021000 0x1000>;
			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
				<4 0>, <5 0>, <6 0>, <7 0>,
				<8 0>, <9 0>, <10 0>, <11 0>,
				<12 0>, <13 0>, <14 0>, <15 0>,
				<16 0>;
			clocks = <&sim KINETIS_SIM_DMA_CLK 0x1040 0x00000002>,
				<&sim KINETIS_SIM_DMAMUX_CLK 0x103C 0x00000002>;
			status = "disabled";
		};

	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};