# Copyright (c) 2022, Valerio Setti <vsetti@baylibre.com
# SPDX-License-Identifier: Apache-2.0

description: STM32 quadrature decoder

compatible: "st,stm32-qdec"

include:
  - name: base.yaml
  - name: pinctrl-device.yaml

properties:
  pinctrl-0:
    required: true

  pinctrl-names:
    required: true

  st,input-polarity-inverted:
    type: boolean
    description: Encoder is triggered by a falling edge on the input pin

  st,input-filter-level:
    type: int
    description: |
      Intensity of the filter applied to the input signal. This is
      implemented by scaling the sampling frequency and adding a counter
      in which N consecutive samples with same value are needed to validate
      a transition.
      Mapping is as follows (F_clk is the timer's clock):
      0: No filter, sampling is done at F_dts (default value)
      1: Fs = F_clk, N=2
      2: Fs = F_clk, N=4
      3: Fs = F_clk, N=8
      4: Fs = F_clk/2, N=6
      5: Fs = F_clk/2, N=8
      6: Fs = F_clk/4, N=6
      7: Fs = F_clk/4, N=8
      8: Fs = F_clk/8, N=6
      9: Fs = F_clk/8, N=8
      10: Fs = F_clk/16, N=5
      11: Fs = F_clk/16, N=6
      12: Fs = F_clk/16, N=8
      13: Fs = F_clk/32, N=5
      14: Fs = F_clk/32, N=6
      15: Fs = F_clk/32, N=8
      Default value is set by hardware at reset
    default: 0
    enum:
      - 0  # No filter
      - 1  # FDIV1_N2
      - 2  # FDIV1_N4
      - 3  # FDIV1_N8
      - 4  # FDIV2_N6
      - 5  # FDIV2_N8
      - 6  # FDIV4_N6
      - 7  # FDIV4_N8
      - 8  # FDIV8_N6
      - 9  # FDIV8_N8
      - 10 # FDIV16_N5
      - 11 # FDIV16_N6
      - 12 # FDIV16_N8
      - 13 # FDIV32_N5
      - 14 # FDIV32_N6
      - 15 # FDIV32_N8

  st,counts-per-revolution:
    type: int
    required: true
    description: |
      This is a number >= 1 that is used to determine how many revolutions
      were done based on the current counter's value.