/*
 * Copyright (c) 2017 Jan Van Winkel <jan.van_winkel@dxplore.eu>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file
 * @brief Public API for display drivers and applications
 */

#ifndef ZEPHYR_INCLUDE_DRIVERS_DISPLAY_H_
#define ZEPHYR_INCLUDE_DRIVERS_DISPLAY_H_

/**
 * @brief Display Interface
 * @defgroup display_interface Display Interface
 * @since 1.14
 * @version 0.8.0
 * @ingroup io_interfaces
 * @{
 */

#include <zephyr/device.h>
#include <errno.h>
#include <stddef.h>
#include <zephyr/types.h>
#include <zephyr/dt-bindings/display/panel.h>

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @brief Display pixel formats
 *
 * Display pixel format enumeration.
 *
 * In case a pixel format consists out of multiple bytes the byte order is
 * big endian.
 */
enum display_pixel_format {
	PIXEL_FORMAT_RGB_888		= BIT(0), /**< 24-bit RGB */
	PIXEL_FORMAT_MONO01		= BIT(1), /**< Monochrome (0=Black 1=White) */
	PIXEL_FORMAT_MONO10		= BIT(2), /**< Monochrome (1=Black 0=White) */
	PIXEL_FORMAT_ARGB_8888		= BIT(3), /**< 32-bit ARGB */
	PIXEL_FORMAT_RGB_565		= BIT(4), /**< 16-bit RGB */
	PIXEL_FORMAT_BGR_565		= BIT(5), /**< 16-bit BGR */
};

/**
 * @brief Bits required per pixel for display format
 *
 * This macro expands to the number of bits required for a given display
 * format. It can be used to allocate a framebuffer based on a given
 * display format type
 */
#define DISPLAY_BITS_PER_PIXEL(fmt)						\
	((((fmt & PIXEL_FORMAT_RGB_888) >> 0) * 24U) +				\
	(((fmt & PIXEL_FORMAT_MONO01) >> 1) * 1U) +				\
	(((fmt & PIXEL_FORMAT_MONO10) >> 2) * 1U) +				\
	(((fmt & PIXEL_FORMAT_ARGB_8888) >> 3) * 32U) +				\
	(((fmt & PIXEL_FORMAT_RGB_565) >> 4) * 16U) +				\
	(((fmt & PIXEL_FORMAT_BGR_565) >> 5) * 16U))

/**
 * @brief Display screen information
 */
enum display_screen_info {
	/**
	 * If selected, one octet represents 8 pixels ordered vertically,
	 * otherwise ordered horizontally.
	 */
	SCREEN_INFO_MONO_VTILED		= BIT(0),
	/**
	 * If selected, the MSB represents the first pixel,
	 * otherwise MSB represents the last pixel.
	 */
	SCREEN_INFO_MONO_MSB_FIRST	= BIT(1),
	/**
	 * Electrophoretic Display.
	 */
	SCREEN_INFO_EPD			= BIT(2),
	/**
	 * Screen has two alternating ram buffers
	 */
	SCREEN_INFO_DOUBLE_BUFFER	= BIT(3),
	/**
	 * Screen has x alignment constrained to width.
	 */
	SCREEN_INFO_X_ALIGNMENT_WIDTH	= BIT(4),
};

/**
 * @brief Enumeration with possible display orientation
 */
enum display_orientation {
	DISPLAY_ORIENTATION_NORMAL,      /**< No rotation */
	DISPLAY_ORIENTATION_ROTATED_90,  /**< Rotated 90 degrees clockwise */
	DISPLAY_ORIENTATION_ROTATED_180, /**< Rotated 180 degrees clockwise */
	DISPLAY_ORIENTATION_ROTATED_270, /**< Rotated 270 degrees clockwise */
};

/** @brief Structure holding display capabilities. */
struct display_capabilities {
	/** Display resolution in the X direction */
	uint16_t x_resolution;
	/** Display resolution in the Y direction */
	uint16_t y_resolution;
	/** Bitwise or of pixel formats supported by the display */
	uint32_t supported_pixel_formats;
	/** Information about display panel */
	uint32_t screen_info;
	/** Currently active pixel format for the display */
	enum display_pixel_format current_pixel_format;
	/** Current display orientation */
	enum display_orientation current_orientation;
};

/** @brief Structure to describe display data buffer layout */
struct display_buffer_descriptor {
	/** Data buffer size in bytes */
	uint32_t buf_size;
	/** Data buffer row width in pixels */
	uint16_t width;
	/** Data buffer column height in pixels */
	uint16_t height;
	/** Number of pixels between consecutive rows in the data buffer */
	uint16_t pitch;
};

/**
 * @typedef display_blanking_on_api
 * @brief Callback API to turn on display blanking
 * See display_blanking_on() for argument description
 */
typedef int (*display_blanking_on_api)(const struct device *dev);

/**
 * @typedef display_blanking_off_api
 * @brief Callback API to turn off display blanking
 * See display_blanking_off() for argument description
 */
typedef int (*display_blanking_off_api)(const struct device *dev);

/**
 * @typedef display_write_api
 * @brief Callback API for writing data to the display
 * See display_write() for argument description
 */
typedef int (*display_write_api)(const struct device *dev, const uint16_t x,
				 const uint16_t y,
				 const struct display_buffer_descriptor *desc,
				 const void *buf);

/**
 * @typedef display_read_api
 * @brief Callback API for reading data from the display
 * See display_read() for argument description
 */
typedef int (*display_read_api)(const struct device *dev, const uint16_t x,
				const uint16_t y,
				const struct display_buffer_descriptor *desc,
				void *buf);

/**
 * @typedef display_get_framebuffer_api
 * @brief Callback API to get framebuffer pointer
 * See display_get_framebuffer() for argument description
 */
typedef void *(*display_get_framebuffer_api)(const struct device *dev);

/**
 * @typedef display_set_brightness_api
 * @brief Callback API to set display brightness
 * See display_set_brightness() for argument description
 */
typedef int (*display_set_brightness_api)(const struct device *dev,
					  const uint8_t brightness);

/**
 * @typedef display_set_contrast_api
 * @brief Callback API to set display contrast
 * See display_set_contrast() for argument description
 */
typedef int (*display_set_contrast_api)(const struct device *dev,
					const uint8_t contrast);

/**
 * @typedef display_get_capabilities_api
 * @brief Callback API to get display capabilities
 * See display_get_capabilities() for argument description
 */
typedef void (*display_get_capabilities_api)(const struct device *dev,
					     struct display_capabilities *
					     capabilities);

/**
 * @typedef display_set_pixel_format_api
 * @brief Callback API to set pixel format used by the display
 * See display_set_pixel_format() for argument description
 */
typedef int (*display_set_pixel_format_api)(const struct device *dev,
					    const enum display_pixel_format
					    pixel_format);

/**
 * @typedef display_set_orientation_api
 * @brief Callback API to set orientation used by the display
 * See display_set_orientation() for argument description
 */
typedef int (*display_set_orientation_api)(const struct device *dev,
					   const enum display_orientation
					   orientation);

/**
 * @brief Display driver API
 * API which a display driver should expose
 */
struct display_driver_api {
	display_blanking_on_api blanking_on;
	display_blanking_off_api blanking_off;
	display_write_api write;
	display_read_api read;
	display_get_framebuffer_api get_framebuffer;
	display_set_brightness_api set_brightness;
	display_set_contrast_api set_contrast;
	display_get_capabilities_api get_capabilities;
	display_set_pixel_format_api set_pixel_format;
	display_set_orientation_api set_orientation;
};

/**
 * @brief Write data to display
 *
 * @param dev Pointer to device structure
 * @param x x Coordinate of the upper left corner where to write the buffer
 * @param y y Coordinate of the upper left corner where to write the buffer
 * @param desc Pointer to a structure describing the buffer layout
 * @param buf Pointer to buffer array
 *
 * @retval 0 on success else negative errno code.
 */
static inline int display_write(const struct device *dev, const uint16_t x,
				const uint16_t y,
				const struct display_buffer_descriptor *desc,
				const void *buf)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	return api->write(dev, x, y, desc, buf);
}

/**
 * @brief Read data from display
 *
 * @param dev Pointer to device structure
 * @param x x Coordinate of the upper left corner where to read from
 * @param y y Coordinate of the upper left corner where to read from
 * @param desc Pointer to a structure describing the buffer layout
 * @param buf Pointer to buffer array
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int display_read(const struct device *dev, const uint16_t x,
			       const uint16_t y,
			       const struct display_buffer_descriptor *desc,
			       void *buf)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->read == NULL) {
		return -ENOSYS;
	}

	return api->read(dev, x, y, desc, buf);
}

/**
 * @brief Get pointer to framebuffer for direct access
 *
 * @param dev Pointer to device structure
 *
 * @retval Pointer to frame buffer or NULL if direct framebuffer access
 * is not supported
 *
 */
static inline void *display_get_framebuffer(const struct device *dev)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->get_framebuffer == NULL) {
		return NULL;
	}

	return api->get_framebuffer(dev);
}

/**
 * @brief Turn display blanking on
 *
 * This function blanks the complete display.
 * The content of the frame buffer will be retained while blanking is enabled
 * and the frame buffer will be accessible for read and write operations.
 *
 * In case backlight control is supported by the driver the backlight is
 * turned off. The backlight configuration is retained and accessible for
 * configuration.
 *
 * In case the driver supports display blanking the initial state of the driver
 * would be the same as if this function was called.
 *
 * @param dev Pointer to device structure
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int display_blanking_on(const struct device *dev)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->blanking_on == NULL) {
		return -ENOSYS;
	}

	return api->blanking_on(dev);
}

/**
 * @brief Turn display blanking off
 *
 * Restore the frame buffer content to the display.
 * In case backlight control is supported by the driver the backlight
 * configuration is restored.
 *
 * @param dev Pointer to device structure
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int display_blanking_off(const struct device *dev)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->blanking_off == NULL) {
		return -ENOSYS;
	}

	return api->blanking_off(dev);
}

/**
 * @brief Set the brightness of the display
 *
 * Set the brightness of the display in steps of 1/256, where 255 is full
 * brightness and 0 is minimal.
 *
 * @param dev Pointer to device structure
 * @param brightness Brightness in steps of 1/256
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int display_set_brightness(const struct device *dev,
					 uint8_t brightness)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->set_brightness == NULL) {
		return -ENOSYS;
	}

	return api->set_brightness(dev, brightness);
}

/**
 * @brief Set the contrast of the display
 *
 * Set the contrast of the display in steps of 1/256, where 255 is maximum
 * difference and 0 is minimal.
 *
 * @param dev Pointer to device structure
 * @param contrast Contrast in steps of 1/256
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int display_set_contrast(const struct device *dev, uint8_t contrast)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->set_contrast == NULL) {
		return -ENOSYS;
	}

	return api->set_contrast(dev, contrast);
}

/**
 * @brief Get display capabilities
 *
 * @param dev Pointer to device structure
 * @param capabilities Pointer to capabilities structure to populate
 */
static inline void display_get_capabilities(const struct device *dev,
					    struct display_capabilities *
					    capabilities)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	api->get_capabilities(dev, capabilities);
}

/**
 * @brief Set pixel format used by the display
 *
 * @param dev Pointer to device structure
 * @param pixel_format Pixel format to be used by display
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int
display_set_pixel_format(const struct device *dev,
			 const enum display_pixel_format pixel_format)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->set_pixel_format == NULL) {
		return -ENOSYS;
	}

	return api->set_pixel_format(dev, pixel_format);
}

/**
 * @brief Set display orientation
 *
 * @param dev Pointer to device structure
 * @param orientation Orientation to be used by display
 *
 * @retval 0 on success else negative errno code.
 * @retval -ENOSYS if not implemented.
 */
static inline int display_set_orientation(const struct device *dev,
					  const enum display_orientation
					  orientation)
{
	struct display_driver_api *api =
		(struct display_driver_api *)dev->api;

	if (api->set_orientation == NULL) {
		return -ENOSYS;
	}

	return api->set_orientation(dev, orientation);
}

#ifdef __cplusplus
}
#endif

/**
 * @}
 */

#endif /* ZEPHYR_INCLUDE_DRIVERS_DISPLAY_H_ */