diff --git a/drivers/sensor/hmc5883l/hmc5883l.c b/drivers/sensor/hmc5883l/hmc5883l.c
index 6d71117..06420c8 100644
--- a/drivers/sensor/hmc5883l/hmc5883l.c
+++ b/drivers/sensor/hmc5883l/hmc5883l.c
@@ -158,6 +158,8 @@
 
 static const struct hmc5883l_config hmc5883l_config_inst = {
 	.i2c = I2C_DT_SPEC_INST_GET(0),
+	IF_ENABLED(CONFIG_HMC5883L_TRIGGER,
+		   (.int_gpio = GPIO_DT_SPEC_INST_GET(0, int_gpios),))
 };
 
 DEVICE_DT_INST_DEFINE(0, hmc5883l_init, NULL, &hmc5883l_data_inst,
diff --git a/drivers/sensor/hmc5883l/hmc5883l.h b/drivers/sensor/hmc5883l/hmc5883l.h
index 2eac35f..4958c2e 100644
--- a/drivers/sensor/hmc5883l/hmc5883l.h
+++ b/drivers/sensor/hmc5883l/hmc5883l.h
@@ -49,7 +49,6 @@
 
 #ifdef CONFIG_HMC5883L_TRIGGER
 	const struct device *dev;
-	const struct device *gpio;
 	struct gpio_callback gpio_cb;
 
 	struct sensor_trigger data_ready_trigger;
@@ -68,6 +67,9 @@
 
 struct hmc5883l_config {
 	struct i2c_dt_spec i2c;
+#ifdef CONFIG_HMC5883L_TRIGGER
+	struct gpio_dt_spec int_gpio;
+#endif
 };
 
 #ifdef CONFIG_HMC5883L_TRIGGER
diff --git a/drivers/sensor/hmc5883l/hmc5883l_trigger.c b/drivers/sensor/hmc5883l/hmc5883l_trigger.c
index 52eeac0..b89ee4e 100644
--- a/drivers/sensor/hmc5883l/hmc5883l_trigger.c
+++ b/drivers/sensor/hmc5883l/hmc5883l_trigger.c
@@ -22,12 +22,11 @@
 			 sensor_trigger_handler_t handler)
 {
 	struct hmc5883l_data *drv_data = dev->data;
+	const struct hmc5883l_config *config = dev->config;
 
 	__ASSERT_NO_MSG(trig->type == SENSOR_TRIG_DATA_READY);
 
-	gpio_pin_interrupt_configure(drv_data->gpio,
-				     DT_INST_GPIO_PIN(0, int_gpios),
-				     GPIO_INT_DISABLE);
+	gpio_pin_interrupt_configure_dt(&config->int_gpio, GPIO_INT_DISABLE);
 
 	drv_data->data_ready_handler = handler;
 	if (handler == NULL) {
@@ -36,9 +35,8 @@
 
 	drv_data->data_ready_trigger = *trig;
 
-	gpio_pin_interrupt_configure(drv_data->gpio,
-				     DT_INST_GPIO_PIN(0, int_gpios),
-				     GPIO_INT_EDGE_TO_ACTIVE);
+	gpio_pin_interrupt_configure_dt(&config->int_gpio,
+					GPIO_INT_EDGE_TO_ACTIVE);
 
 	return 0;
 }
@@ -48,12 +46,11 @@
 {
 	struct hmc5883l_data *drv_data =
 		CONTAINER_OF(cb, struct hmc5883l_data, gpio_cb);
+	const struct hmc5883l_config *config = drv_data->dev->config;
 
 	ARG_UNUSED(pins);
 
-	gpio_pin_interrupt_configure(dev,
-				     DT_INST_GPIO_PIN(0, int_gpios),
-				     GPIO_INT_DISABLE);
+	gpio_pin_interrupt_configure_dt(&config->int_gpio, GPIO_INT_DISABLE);
 
 #if defined(CONFIG_HMC5883L_TRIGGER_OWN_THREAD)
 	k_sem_give(&drv_data->gpio_sem);
@@ -65,15 +62,15 @@
 static void hmc5883l_thread_cb(const struct device *dev)
 {
 	struct hmc5883l_data *drv_data = dev->data;
+	const struct hmc5883l_config *config = dev->config;
 
 	if (drv_data->data_ready_handler != NULL) {
 		drv_data->data_ready_handler(dev,
 					     &drv_data->data_ready_trigger);
 	}
 
-	gpio_pin_interrupt_configure(drv_data->gpio,
-				     DT_INST_GPIO_PIN(0, int_gpios),
-				     GPIO_INT_EDGE_TO_ACTIVE);
+	gpio_pin_interrupt_configure_dt(&config->int_gpio,
+					GPIO_INT_EDGE_TO_ACTIVE);
 }
 
 #ifdef CONFIG_HMC5883L_TRIGGER_OWN_THREAD
@@ -99,26 +96,19 @@
 int hmc5883l_init_interrupt(const struct device *dev)
 {
 	struct hmc5883l_data *drv_data = dev->data;
+	const struct hmc5883l_config *config = dev->config;
 
-	/* setup data ready gpio interrupt */
-	drv_data->gpio = device_get_binding(
-		DT_INST_GPIO_LABEL(0, int_gpios));
-	if (drv_data->gpio == NULL) {
-		LOG_ERR("Failed to get pointer to %s device.",
-			DT_INST_GPIO_LABEL(0, int_gpios));
-		return -EINVAL;
+	if (!device_is_ready(config->int_gpio.port)) {
+		LOG_ERR("GPIO device not ready");
+		return -ENODEV;
 	}
 
-	gpio_pin_configure(drv_data->gpio,
-			   DT_INST_GPIO_PIN(0, int_gpios),
-			   GPIO_INPUT |
-			   DT_INST_GPIO_FLAGS(0, int_gpios));
+	gpio_pin_configure_dt(&config->int_gpio, GPIO_INPUT);
 
-	gpio_init_callback(&drv_data->gpio_cb,
-			   hmc5883l_gpio_callback,
-			   BIT(DT_INST_GPIO_PIN(0, int_gpios)));
+	gpio_init_callback(&drv_data->gpio_cb, hmc5883l_gpio_callback,
+			   BIT(config->int_gpio.pin));
 
-	if (gpio_add_callback(drv_data->gpio, &drv_data->gpio_cb) < 0) {
+	if (gpio_add_callback(config->int_gpio.port, &drv_data->gpio_cb) < 0) {
 		LOG_ERR("Failed to set gpio callback.");
 		return -EIO;
 	}
@@ -138,9 +128,8 @@
 	drv_data->work.handler = hmc5883l_work_cb;
 #endif
 
-	gpio_pin_interrupt_configure(drv_data->gpio,
-				     DT_INST_GPIO_PIN(0, int_gpios),
-				     GPIO_INT_EDGE_TO_ACTIVE);
+	gpio_pin_interrupt_configure_dt(&config->int_gpio,
+					GPIO_INT_EDGE_TO_ACTIVE);
 
 	return 0;
 }