/* quark_se_clock_control.c - Clock controller driver for Quark SE */

/*
 * Copyright (c) 2015 Intel Corporation.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <nanokernel.h>
#include <arch/cpu.h>

#include <misc/__assert.h>
#include <board.h>
#include <device.h>
#include <init.h>

#include <sys_io.h>

#include <clock_control.h>
#include <clock_control/quark_se_clock_control.h>

#define SYS_LOG_LEVEL CONFIG_SYS_LOG_CLOCK_CONTROL_LEVEL
#include <misc/sys_log.h>

struct quark_se_clock_control_config {
	uint32_t base_address;
};

static inline int quark_se_clock_control_on(struct device *dev,
					    clock_control_subsys_t sub_system)
{
	struct quark_se_clock_control_config *info = dev->config->config_info;
	uint32_t subsys = POINTER_TO_INT(sub_system);

	if (sub_system == CLOCK_CONTROL_SUBSYS_ALL) {
		SYS_LOG_DBG("Enabling all clock gates on dev %p", dev);
		sys_write32(0xffffffff, info->base_address);

		return 0;
	}

	SYS_LOG_DBG("Enabling clock gate on dev %p subsystem %u", dev, subsys);

	return sys_test_and_set_bit(info->base_address, subsys);
}

static inline int quark_se_clock_control_off(struct device *dev,
					     clock_control_subsys_t sub_system)
{
	struct quark_se_clock_control_config *info = dev->config->config_info;
	uint32_t subsys = POINTER_TO_INT(sub_system);

	if (sub_system == CLOCK_CONTROL_SUBSYS_ALL) {
		SYS_LOG_DBG("Disabling all clock gates on dev %p", dev);
		sys_write32(0x00000000, info->base_address);

		return 0;
	}

	SYS_LOG_DBG("clock gate on dev %p subsystem %u", dev, subsys);

	return sys_test_and_clear_bit(info->base_address, subsys);
}

static struct clock_control_driver_api quark_se_clock_control_api = {
	.on = quark_se_clock_control_on,
	.off = quark_se_clock_control_off,
	.get_rate = NULL,
};

int quark_se_clock_control_init(struct device *dev)
{
	SYS_LOG_DBG("Quark Se clock controller driver initialized on device: "
		    "%p", dev);
	return 0;
}

#ifdef CONFIG_CLOCK_CONTROL_QUARK_SE_PERIPHERAL

struct quark_se_clock_control_config clock_quark_se_peripheral_config = {
	.base_address = CLOCK_PERIPHERAL_BASE_ADDR
};

DEVICE_AND_API_INIT(clock_quark_se_peripheral,
			CONFIG_CLOCK_CONTROL_QUARK_SE_PERIPHERAL_DRV_NAME,
			&quark_se_clock_control_init,
			NULL, &clock_quark_se_peripheral_config,
			PRIMARY, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
			&quark_se_clock_control_api);

#endif /* CONFIG_CLOCK_CONTROL_QUARK_SE_PERIPHERAL */
#ifdef CONFIG_CLOCK_CONTROL_QUARK_SE_EXTERNAL

struct quark_se_clock_control_config clock_quark_se_external_config = {
	.base_address = CLOCK_EXTERNAL_BASE_ADDR
};

DEVICE_AND_API_INIT(clock_quark_se_external,
			CONFIG_CLOCK_CONTROL_QUARK_SE_EXTERNAL_DRV_NAME,
			&quark_se_clock_control_init,
			NULL, &clock_quark_se_external_config,
			PRIMARY, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
			&quark_se_clock_control_api);

#endif /* CONFIG_CLOCK_CONTROL_QUARK_SE_EXTERNAL */
#ifdef CONFIG_CLOCK_CONTROL_QUARK_SE_SENSOR

struct quark_se_clock_control_config clock_quark_se_sensor_config = {
	.base_address = CLOCK_SENSOR_BASE_ADDR
};

DEVICE_AND_API_INIT(clock_quark_se_sensor,
			CONFIG_CLOCK_CONTROL_QUARK_SE_SENSOR_DRV_NAME,
			&quark_se_clock_control_init,
			NULL, &clock_quark_se_sensor_config,
			PRIMARY, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
			&quark_se_clock_control_api);

#endif /* CONFIG_CLOCK_CONTROL_QUARK_SE_SENSOR */