/*
 * Copyright (c) 2016 Intel Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <i2c.h>
#include <init.h>
#include <misc/__assert.h>
#include <misc/byteorder.h>
#include <sensor.h>
#include <string.h>

#include "sensor_hmc5883l.h"

static void hmc5883l_convert(struct sensor_value *val, int16_t raw_val,
			     uint16_t divider)
{
	/* val = raw_val / divider */
	val->type = SENSOR_VALUE_TYPE_INT_PLUS_MICRO;
	val->val1 = raw_val / divider;
	val->val2 = (((int64_t)raw_val % divider) * 1000000L) / divider;
}

static int hmc5883l_channel_get(struct device *dev,
				enum sensor_channel chan,
				struct sensor_value *val)
{
	struct hmc5883l_data *drv_data = dev->driver_data;

	if (chan == SENSOR_CHAN_MAGN_X) {
		hmc5883l_convert(val, drv_data->x_sample,
				 hmc5883l_gain[drv_data->gain_idx]);
	} else if (chan == SENSOR_CHAN_MAGN_Y) {
		hmc5883l_convert(val, drv_data->y_sample,
				 hmc5883l_gain[drv_data->gain_idx]);
	} else if (chan == SENSOR_CHAN_MAGN_Z) {
		hmc5883l_convert(val, drv_data->z_sample,
				 hmc5883l_gain[drv_data->gain_idx]);
	} else { /* chan == SENSOR_CHAN_MAGN_ANY */
		hmc5883l_convert(val, drv_data->x_sample,
				 hmc5883l_gain[drv_data->gain_idx]);
		hmc5883l_convert(val + 1, drv_data->y_sample,
				 hmc5883l_gain[drv_data->gain_idx]);
		hmc5883l_convert(val + 2, drv_data->z_sample,
				 hmc5883l_gain[drv_data->gain_idx]);
	}

	return 0;
}

static int hmc5883l_sample_fetch(struct device *dev, enum sensor_channel chan)
{
	struct hmc5883l_data *drv_data = dev->driver_data;
	int16_t buf[3];

	__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL);

	/* fetch magnetometer sample */
	if (i2c_burst_read(drv_data->i2c, HMC5883L_I2C_ADDR,
			   HMC5883L_REG_DATA_START, (uint8_t *)buf, 6) < 0) {
		SYS_LOG_ERR("Failed to fetch megnetometer sample.");
		return -EIO;
	}

	drv_data->x_sample = sys_be16_to_cpu(buf[0]);
	drv_data->y_sample = sys_be16_to_cpu(buf[1]);
	drv_data->z_sample = sys_be16_to_cpu(buf[2]);

	return 0;
}

static struct sensor_driver_api hmc5883l_driver_api = {
#if CONFIG_HMC5883L_TRIGGER
	.trigger_set = hmc5883l_trigger_set,
#endif
	.sample_fetch = hmc5883l_sample_fetch,
	.channel_get = hmc5883l_channel_get,
};

int hmc5883l_init(struct device *dev)
{
	struct hmc5883l_data *drv_data = dev->driver_data;
	uint8_t chip_cfg[3], id[3], idx;

	drv_data->i2c = device_get_binding(CONFIG_HMC5883L_I2C_MASTER_DEV_NAME);
	if (drv_data->i2c == NULL) {
		SYS_LOG_ERR("Failed to get pointer to %s device.",
			    CONFIG_HMC5883L_I2C_MASTER_DEV_NAME);
		return -EINVAL;
	}

	/* check chip ID */
	if (i2c_burst_read(drv_data->i2c, HMC5883L_I2C_ADDR,
			   HMC5883L_REG_CHIP_ID, id, 3) < 0) {
		SYS_LOG_ERR("Failed to read chip ID.");
		return -EIO;
	}

	if (id[0] != HMC5883L_CHIP_ID_A || id[1] != HMC5883L_CHIP_ID_B ||
	    id[2] != HMC5883L_CHIP_ID_C) {
		SYS_LOG_ERR("Invalid chip ID.");
		return -EINVAL;
	}

	/* check if CONFIG_HMC5883L_FS is valid */
	for (idx = 0; idx < ARRAY_SIZE(hmc5883l_fs_strings); idx++) {
		if (!strcmp(hmc5883l_fs_strings[idx], CONFIG_HMC5883L_FS)) {
			break;
		}
	}

	if (idx == ARRAY_SIZE(hmc5883l_fs_strings)) {
		SYS_LOG_ERR("Invalid full-scale range value.");
		return -EINVAL;
	}

	drv_data->gain_idx = idx;

	/* check if CONFIG_HMC5883L_ODR is valid */
	for (idx = 0; idx < ARRAY_SIZE(hmc5883l_odr_strings); idx++) {
		if (!strcmp(hmc5883l_odr_strings[idx], CONFIG_HMC5883L_ODR)) {
			break;
		}
	}

	if (idx == ARRAY_SIZE(hmc5883l_odr_strings)) {
		SYS_LOG_ERR("Invalid ODR value.");
		return -EINVAL;
	}

	/* configure device */
	chip_cfg[0] = idx << HMC5883L_ODR_SHIFT;
	chip_cfg[1] = drv_data->gain_idx << HMC5883L_GAIN_SHIFT;
	chip_cfg[2] = HMC5883L_MODE_CONTINUOUS;

	if (i2c_burst_write(drv_data->i2c, HMC5883L_I2C_ADDR,
			    HMC5883L_REG_CONFIG_A, chip_cfg, 3) < 0) {
		SYS_LOG_ERR("Failed to configure chip.");
		return -EIO;
	}

#ifdef CONFIG_HMC5883L_TRIGGER
	if (hmc5883l_init_interrupt(dev) < 0) {
		SYS_LOG_ERR("Failed to initialize interrupts.");
		return -EIO;
	}
#endif

	dev->driver_api = &hmc5883l_driver_api;

	return 0;
}

struct hmc5883l_data hmc5883l_driver;

DEVICE_INIT(hmc5883l, CONFIG_HMC5883L_NAME, hmc5883l_init, &hmc5883l_driver,
	    NULL, SECONDARY, CONFIG_HMC5883L_INIT_PRIORITY);