/*
 * Copyright (c) 2019-2021 Vestas Wind Systems A/S
 *
 * Based on NXP k6x soc.c, which is:
 * Copyright (c) 2014-2015 Wind River Systems, Inc.
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <zephyr/init.h>
#include <fsl_clock.h>
#include <fsl_cache.h>
#include <zephyr/arch/arm/aarch32/cortex_m/cmsis.h>

#define ASSERT_WITHIN_RANGE(val, min, max, str) \
	BUILD_ASSERT(val >= min && val <= max, str)

#define ASSERT_ASYNC_CLK_DIV_VALID(val, str) \
	BUILD_ASSERT(val == 0 || val == 1 || val == 2 || val == 4 ||	\
		     val == 8 || val == 16 || val == 2 || val == 64, str)

#define TO_SYS_CLK_DIV(val) _DO_CONCAT(kSCG_SysClkDivBy, val)

#define kSCG_AsyncClkDivBy0 kSCG_AsyncClkDisable
#define TO_ASYNC_CLK_DIV(val) _DO_CONCAT(kSCG_AsyncClkDivBy, val)

#define SCG_CLOCK_NODE(name) DT_CHILD(DT_INST(0, nxp_kinetis_scg), name)
#define SCG_CLOCK_DIV(name) DT_PROP(SCG_CLOCK_NODE(name), clock_div)
#define SCG_CLOCK_MULT(name) DT_PROP(SCG_CLOCK_NODE(name), clock_mult)

/* System Clock configuration */
ASSERT_WITHIN_RANGE(SCG_CLOCK_DIV(slow_clk), 2, 8,
		    "Invalid SCG slow clock divider value");
ASSERT_WITHIN_RANGE(SCG_CLOCK_DIV(bus_clk), 1, 16,
		    "Invalid SCG bus clock divider value");
#if DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(core_clk)), SCG_CLOCK_NODE(spll_clk))
/* Core divider range is 1 to 4 with SPLL as clock source */
ASSERT_WITHIN_RANGE(SCG_CLOCK_DIV(core_clk), 1, 4,
		    "Invalid SCG core clock divider value");
#else
ASSERT_WITHIN_RANGE(SCG_CLOCK_DIV(core_clk), 1, 16,
		    "Invalid SCG core clock divider value");
#endif
static const scg_sys_clk_config_t scg_sys_clk_config = {
	.divSlow = TO_SYS_CLK_DIV(SCG_CLOCK_DIV(slow_clk)),
	.divBus  = TO_SYS_CLK_DIV(SCG_CLOCK_DIV(bus_clk)),
	.divCore = TO_SYS_CLK_DIV(SCG_CLOCK_DIV(core_clk)),
#if DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(core_clk)), SCG_CLOCK_NODE(sosc_clk))
	.src     = kSCG_SysClkSrcSysOsc,
#elif DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(core_clk)), SCG_CLOCK_NODE(sirc_clk))
	.src     = kSCG_SysClkSrcSirc,
#elif DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(core_clk)), SCG_CLOCK_NODE(firc_clk))
	.src     = kSCG_SysClkSrcFirc,
#elif DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(core_clk)), SCG_CLOCK_NODE(spll_clk))
	.src     = kSCG_SysClkSrcSysPll,
#else
#error Invalid SCG core clock source
#endif
};

#if DT_NODE_HAS_STATUS(SCG_CLOCK_NODE(sosc_clk), okay)
/* System Oscillator (SOSC) configuration */
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(soscdiv1_clk),
		       "Invalid SCG SOSC divider 1 value");
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(soscdiv2_clk),
		       "Invalid SCG SOSC divider 2 value");
static const scg_sosc_config_t scg_sosc_config = {
	.freq        = DT_PROP(SCG_CLOCK_NODE(sosc_clk), clock_frequency),
	.monitorMode = kSCG_SysOscMonitorDisable,
	.enableMode  = kSCG_SysOscEnable | kSCG_SysOscEnableInLowPower,
	.div1        = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(soscdiv1_clk)),
	.div2        = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(soscdiv2_clk)),
	.workMode    = DT_PROP(DT_INST(0, nxp_kinetis_scg), sosc_mode)
};
#endif /* DT_NODE_HAS_PROP(DT_INST(0, nxp_kinetis_scg), sosc_freq) */

/* Slow Internal Reference Clock (SIRC) configuration */
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(sircdiv1_clk),
		       "Invalid SCG SIRC divider 1 value");
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(sircdiv2_clk),
		       "Invalid SCG SIRC divider 2 value");
static const scg_sirc_config_t scg_sirc_config = {
	.enableMode = kSCG_SircEnable | kSCG_SircEnableInLowPower,
	.div1       = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(sircdiv1_clk)),
	.div2       = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(sircdiv2_clk)),
#if MHZ(2) == DT_PROP(SCG_CLOCK_NODE(sirc_clk), clock_frequency)
	.range      = kSCG_SircRangeLow
#elif MHZ(8) == DT_PROP(SCG_CLOCK_NODE(sirc_clk), clock_frequency)
	.range      = kSCG_SircRangeHigh
#else
#error Invalid SCG SIRC clock frequency
#endif
};

/* Fast Internal Reference Clock (FIRC) configuration */
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(fircdiv1_clk),
		       "Invalid SCG FIRC divider 1 value");
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(fircdiv2_clk),
		       "Invalid SCG FIRC divider 2 value");
static const scg_firc_config_t scg_firc_config = {
	.enableMode = kSCG_FircEnable,
	.div1       = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(fircdiv1_clk)),
	.div2       = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(fircdiv2_clk)),
#if MHZ(48) == DT_PROP(SCG_CLOCK_NODE(firc_clk), clock_frequency)
	.range      = kSCG_FircRange48M,
#elif MHZ(52) == DT_PROP(SCG_CLOCK_NODE(firc_clk), clock_frequency)
	.range      = kSCG_FircRange52M,
#elif MHZ(56) == DT_PROP(SCG_CLOCK_NODE(firc_clk), clock_frequency)
	.range      = kSCG_FircRange56M,
#elif MHZ(60) == DT_PROP(SCG_CLOCK_NODE(firc_clk), clock_frequency)
	.range      = kSCG_FircRange60M,
#else
#error Invalid SCG FIRC clock frequency
#endif
	.trimConfig = NULL
};

/* System Phase-Locked Loop (SPLL) configuration */
ASSERT_WITHIN_RANGE(SCG_CLOCK_DIV(spll_clk), 2, 2,
		    "Invalid SCG SPLL fixed divider value");
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(splldiv1_clk),
		       "Invalid SCG SPLL divider 1 value");
ASSERT_ASYNC_CLK_DIV_VALID(SCG_CLOCK_DIV(splldiv2_clk),
		       "Invalid SCG SPLL divider 2 value");
ASSERT_WITHIN_RANGE(SCG_CLOCK_DIV(pll), 1, 8,
		    "Invalid SCG PLL pre divider value");
ASSERT_WITHIN_RANGE(SCG_CLOCK_MULT(pll), 16, 47,
		    "Invalid SCG PLL multiplier value");
static const scg_spll_config_t scg_spll_config = {
	.enableMode  = kSCG_SysPllEnable,
	.monitorMode = kSCG_SysPllMonitorDisable,
	.div1        = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(splldiv1_clk)),
	.div2        = TO_ASYNC_CLK_DIV(SCG_CLOCK_DIV(splldiv2_clk)),
#if DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(pll)), SCG_CLOCK_NODE(sosc_clk))
	.src         = kSCG_SysPllSrcSysOsc,
#elif DT_SAME_NODE(DT_CLOCKS_CTLR(SCG_CLOCK_NODE(pll)), SCG_CLOCK_NODE(firc_clk))
	.src         = kSCG_SysPllSrcFirc,
#else
#error Invalid SCG PLL clock source
#endif
	.prediv      = (SCG_CLOCK_DIV(pll) - 1U),
	.mult        = (SCG_CLOCK_MULT(pll) - 16U)
};

static ALWAYS_INLINE void clk_init(void)
{
	const scg_sys_clk_config_t scg_sys_clk_config_safe = {
		.divSlow = kSCG_SysClkDivBy4,
		.divBus  = kSCG_SysClkDivBy1,
		.divCore = kSCG_SysClkDivBy1,
		.src     = kSCG_SysClkSrcSirc
	};
	scg_sys_clk_config_t current;

#if DT_NODE_HAS_STATUS(SCG_CLOCK_NODE(sosc_clk), okay)
	/* Optionally initialize system oscillator */
	CLOCK_InitSysOsc(&scg_sosc_config);
	CLOCK_SetXtal0Freq(scg_sosc_config.freq);
#endif
	/* Configure SIRC */
	CLOCK_InitSirc(&scg_sirc_config);

	/* Temporary switch to safe SIRC in order to configure FIRC */
	CLOCK_SetRunModeSysClkConfig(&scg_sys_clk_config_safe);
	do {
		CLOCK_GetCurSysClkConfig(&current);
	} while (current.src != scg_sys_clk_config_safe.src);
	CLOCK_InitFirc(&scg_firc_config);

	/* Configure System PLL */
	CLOCK_InitSysPll(&scg_spll_config);

	/* Only RUN mode supported for now */
	CLOCK_SetRunModeSysClkConfig(&scg_sys_clk_config);
	do {
		CLOCK_GetCurSysClkConfig(&current);
	} while (current.src != scg_sys_clk_config.src);

#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpuart0), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpuart0,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpuart0), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpuart1), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpuart1,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpuart1), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpuart2), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpuart2,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpuart2), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpi2c0), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpi2c0,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpi2c0), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpi2c1), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpi2c1,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpi2c1), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpspi0), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpspi0,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpspi0), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(lpspi1), okay)
	CLOCK_SetIpSrc(kCLOCK_Lpspi1,
		       DT_CLOCKS_CELL(DT_NODELABEL(lpspi1), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(adc0), okay)
	CLOCK_SetIpSrc(kCLOCK_Adc0,
		       DT_CLOCKS_CELL(DT_NODELABEL(adc0), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(adc1), okay)
	CLOCK_SetIpSrc(kCLOCK_Adc1,
		       DT_CLOCKS_CELL(DT_NODELABEL(adc1), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(adc2), okay)
	CLOCK_SetIpSrc(kCLOCK_Adc2,
		       DT_CLOCKS_CELL(DT_NODELABEL(adc2), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(ftm0), okay)
	CLOCK_SetIpSrc(kCLOCK_Ftm0,
		       DT_CLOCKS_CELL(DT_NODELABEL(ftm0), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(ftm1), okay)
	CLOCK_SetIpSrc(kCLOCK_Ftm1,
		       DT_CLOCKS_CELL(DT_NODELABEL(ftm1), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(ftm2), okay)
	CLOCK_SetIpSrc(kCLOCK_Ftm2,
		       DT_CLOCKS_CELL(DT_NODELABEL(ftm2), ip_source));
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(ftm3), okay)
	CLOCK_SetIpSrc(kCLOCK_Ftm3,
		       DT_CLOCKS_CELL(DT_NODELABEL(ftm3), ip_source));
#endif
}

static int ke1xf_init(void)

{

	unsigned int old_level; /* old interrupt lock level */
#if !defined(CONFIG_ARM_MPU)
	uint32_t temp_reg;
#endif /* !CONFIG_ARM_MPU */

	/* Disable interrupts */
	old_level = irq_lock();

#if !defined(CONFIG_ARM_MPU)
	/*
	 * Disable memory protection and clear slave port errors.
	 * Note that the KE1xF does not implement the optional ARMv7-M memory
	 * protection unit (MPU), specified by the architecture (PMSAv7), in the
	 * Cortex-M4 core.  Instead, the processor includes its own MPU module.
	 */
	temp_reg = SYSMPU->CESR;
	temp_reg &= ~SYSMPU_CESR_VLD_MASK;
	temp_reg |= SYSMPU_CESR_SPERR_MASK;
	SYSMPU->CESR = temp_reg;
#endif /* !CONFIG_ARM_MPU */

	/* Initialize system clocks and PLL */
	clk_init();

	/*
	 * Install default handler that simply resets the CPU if
	 * configured in the kernel, NOP otherwise
	 */
	NMI_INIT();

#ifndef CONFIG_KINETIS_KE1XF_ENABLE_CODE_CACHE
	/* SystemInit will have enabled the code cache. Disable it here */
	L1CACHE_DisableCodeCache();
#endif
	/* Restore interrupt state */
	irq_unlock(old_level);

	return 0;
}

#ifdef CONFIG_PLATFORM_SPECIFIC_INIT

#ifdef CONFIG_WDOG_INIT

void z_arm_watchdog_init(void)
{
	/*
	 * NOTE: DO NOT SINGLE STEP THROUGH THIS SECTION!!! Watchdog
	 * reconfiguration must take place within 128 bus clocks from
	 * unlocking. Single stepping through the code will cause the
	 * watchdog to close the unlock window again.
	 */

	/*
	 * Unlocking watchdog to enable reconfiguration after bootloader
	 * watchdog reconfiguration is only required if the watchdog
	 * is to be enabled, since SystemInit will disable
	 * it at boot unless CONFIG_WDOG_ENABLE_AT_BOOT is set
	 */
	WDOG->CNT = WDOG_UPDATE_KEY;
	while (!(WDOG->CS & WDOG_CS_ULK_MASK)) {
		;
	}

	/*
	 * Watchdog reconfiguration only takes effect after writing to
	 * both TOVAL and CS registers.
	 */
	WDOG->TOVAL = CONFIG_WDOG_INITIAL_TIMEOUT >> 1;
	WDOG->CS = WDOG_CS_PRES(1) | WDOG_CS_CLK(1) | WDOG_CS_WAIT(1) |
		   WDOG_CS_EN(1) | WDOG_CS_UPDATE(1);

	while (!(WDOG->CS & WDOG_CS_RCS_MASK)) {
		;
	}
}

#endif /* CONFIG_WDOG_INIT */

void z_arm_platform_init(void)
{
	/* SystemInit is provided by the NXP SDK */
	SystemInit();
}

#endif /* CONFIG_PLATFORM_SPECIFIC_INIT */

SYS_INIT(ke1xf_init, PRE_KERNEL_1, 0);