| /* |
| * Copyright (c) 2022 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include "robokit1-pinctrl.dtsi" |
| |
| / { |
| aliases { |
| led0 = &led_0; |
| magn0 = &akm09918c; |
| accel0 = &icm42688; |
| die-temp0 = &icm42688; |
| ambient-temp0 = &temp_sensor; |
| }; |
| |
| chosen { |
| zephyr,console = &uart2; |
| zephyr,shell-uart = &uart2; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led_0: led_0 { |
| gpios = <&pioa 11 GPIO_ACTIVE_HIGH>; |
| label = "User LED"; |
| }; |
| led_1: led_1 { |
| gpios = <&pioa 12 GPIO_ACTIVE_HIGH>; |
| label = "User LED"; |
| }; |
| led_2: led_2 { |
| gpios = <&pioa 13 GPIO_ACTIVE_HIGH>; |
| label = "User LED"; |
| }; |
| led_3: led_3 { |
| gpios = <&pioa 14 GPIO_ACTIVE_HIGH>; |
| label = "User LED"; |
| }; |
| }; |
| |
| temp_sensor: ambient_temp_sensor { |
| compatible = "epcos,b57861s0103a039"; |
| io-channels = <&spi_adc 0>; |
| pullup-uv = <3300000>; |
| pullup-ohm = <0>; |
| pulldown-ohm = <10000>; |
| connected-positive; |
| }; |
| }; |
| |
| &cpu0 { |
| clock-frequency = <300000000>; |
| }; |
| |
| &afec0 { |
| pinctrl-0 = <&afec0_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &dacc { |
| status = "okay"; |
| }; |
| |
| &twihs0 { |
| pinctrl-0 = <&twihs0_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &twihs1 { |
| pinctrl-0 = <&twihs1_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &twihs2 { |
| pinctrl-0 = <&twihs2_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| akm09918c: akm09918c@c { |
| compatible = "asahi-kasei,akm09918c"; |
| reg = <0xc>; |
| }; |
| }; |
| |
| #include <zephyr/dt-bindings/sensor/icm42688.h> |
| |
| &spi0 { |
| pinctrl-0 = <&spi0_default>; |
| pinctrl-names = "default"; |
| dmas = <&xdmac 0 DMA_PERID_SPI0_TX>, <&xdmac 1 DMA_PERID_SPI0_RX>; |
| dma-names = "tx", "rx"; |
| cs-gpios =<&pioa 31 GPIO_ACTIVE_LOW>, |
| <&pioc 31 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| icm42688: icm42688p@0 { |
| compatible = "invensense,icm42688"; |
| reg = <0>; |
| int-gpios = <&pioc 5 GPIO_ACTIVE_HIGH>; |
| spi-max-frequency = <24000000>; |
| accel-pwr-mode = <ICM42688_DT_ACCEL_LN>; |
| accel-odr = <ICM42688_DT_ACCEL_ODR_2000>; |
| accel-fs = <ICM42688_DT_ACCEL_FS_16>; |
| gyro-pwr-mode = <ICM42688_DT_GYRO_LN>; |
| gyro-odr = <ICM42688_DT_GYRO_ODR_2000>; |
| gyro-fs = <ICM42688_DT_GYRO_FS_2000>; |
| }; |
| spi_adc: adc@1 { |
| compatible = "ti,ads7052"; |
| reg = <1>; |
| #io-channel-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| spi-max-frequency = <24000000>; |
| channel@0 { |
| reg = <0>; |
| zephyr,gain = "ADC_GAIN_1"; |
| zephyr,reference = "ADC_REF_VDD_1"; |
| zephyr,vref-mv = <3300>; |
| zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>; |
| zephyr,resolution = <14>; |
| }; |
| }; |
| }; |
| |
| &spi1 { |
| pinctrl-0 = <&spi1_default>; |
| pinctrl-names = "default"; |
| cs-gpios = <&pioc 25 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| current-speed = <115200>; |
| pinctrl-0 = <&uart0_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| current-speed = <115200>; |
| pinctrl-0 = <&uart1_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| current-speed = <115200>; |
| pinctrl-0 = <&uart2_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &usart2 { |
| current-speed = <115200>; |
| pinctrl-0 = <&usart2_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &wdt { |
| status = "okay"; |
| }; |
| |
| zephyr_udc0: &usbhs { |
| status = "okay"; |
| }; |
| |
| &mdio { |
| pinctrl-0 = <&mdio_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &pwm0 { |
| pinctrl-0 = <&pwm_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| |
| &xdmac { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* |
| * The first half of sector 0 (64 kbytes) |
| * is reserved for the bootloader |
| */ |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x0 0x00010000>; |
| read-only; |
| }; |
| |
| /* From sector 1 to sector 7 (included): slot0 (896 kbytes) */ |
| slot0_partition: partition@20000 { |
| label = "image-0"; |
| reg = <0x00020000 0x000e0000>; |
| }; |
| |
| /* From sector 8 to sector 14 (included): slot1 (896 kbytes) */ |
| slot1_partition: partition@100000 { |
| label = "image-1"; |
| reg = <0x00100000 0x000e0000>; |
| }; |
| |
| /* Sector 15: scratch (128 kbytes) */ |
| scratch_partition: partition@1e0000 { |
| label = "image-scratch"; |
| reg = <0x001e0000 0x00020000>; |
| }; |
| }; |
| }; |