| /* |
| * Copyright (c) 2018 - 2020, Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef NRFX_CONFIG_NRF9160_H__ |
| #define NRFX_CONFIG_NRF9160_H__ |
| |
| #ifndef NRFX_CONFIG_H__ |
| #error "This file should not be included directly. Include nrfx_config.h instead." |
| #endif |
| |
| #define NRF_CLOCK NRF_PERIPH(NRF_CLOCK) |
| #define NRF_DPPIC NRF_PERIPH(NRF_DPPIC) |
| #define NRF_EGU0 NRF_PERIPH(NRF_EGU0) |
| #define NRF_EGU1 NRF_PERIPH(NRF_EGU1) |
| #define NRF_EGU2 NRF_PERIPH(NRF_EGU2) |
| #define NRF_EGU3 NRF_PERIPH(NRF_EGU3) |
| #define NRF_EGU4 NRF_PERIPH(NRF_EGU4) |
| #define NRF_EGU5 NRF_PERIPH(NRF_EGU5) |
| #define NRF_FPU NRF_PERIPH(NRF_FPU) |
| #define NRF_IPC NRF_PERIPH(NRF_IPC) |
| #define NRF_I2S NRF_PERIPH(NRF_I2S) |
| #define NRF_KMU NRF_PERIPH(NRF_KMU) |
| #define NRF_NVMC NRF_PERIPH(NRF_NVMC) |
| #define NRF_P0 NRF_PERIPH(NRF_P0) |
| #define NRF_PDM NRF_PERIPH(NRF_PDM) |
| #define NRF_POWER NRF_PERIPH(NRF_POWER) |
| #define NRF_PWM0 NRF_PERIPH(NRF_PWM0) |
| #define NRF_PWM1 NRF_PERIPH(NRF_PWM1) |
| #define NRF_PWM2 NRF_PERIPH(NRF_PWM2) |
| #define NRF_PWM3 NRF_PERIPH(NRF_PWM3) |
| #define NRF_REGULATORS NRF_PERIPH(NRF_REGULATORS) |
| #define NRF_RTC0 NRF_PERIPH(NRF_RTC0) |
| #define NRF_RTC1 NRF_PERIPH(NRF_RTC1) |
| #define NRF_SAADC NRF_PERIPH(NRF_SAADC) |
| #define NRF_SPIM0 NRF_PERIPH(NRF_SPIM0) |
| #define NRF_SPIM1 NRF_PERIPH(NRF_SPIM1) |
| #define NRF_SPIM2 NRF_PERIPH(NRF_SPIM2) |
| #define NRF_SPIM3 NRF_PERIPH(NRF_SPIM3) |
| #define NRF_SPIS0 NRF_PERIPH(NRF_SPIS0) |
| #define NRF_SPIS1 NRF_PERIPH(NRF_SPIS1) |
| #define NRF_SPIS2 NRF_PERIPH(NRF_SPIS2) |
| #define NRF_SPIS3 NRF_PERIPH(NRF_SPIS3) |
| #define NRF_TIMER0 NRF_PERIPH(NRF_TIMER0) |
| #define NRF_TIMER1 NRF_PERIPH(NRF_TIMER1) |
| #define NRF_TIMER2 NRF_PERIPH(NRF_TIMER2) |
| #define NRF_TWIM0 NRF_PERIPH(NRF_TWIM0) |
| #define NRF_TWIM1 NRF_PERIPH(NRF_TWIM1) |
| #define NRF_TWIM2 NRF_PERIPH(NRF_TWIM2) |
| #define NRF_TWIM3 NRF_PERIPH(NRF_TWIM3) |
| #define NRF_TWIS0 NRF_PERIPH(NRF_TWIS0) |
| #define NRF_TWIS1 NRF_PERIPH(NRF_TWIS1) |
| #define NRF_TWIS2 NRF_PERIPH(NRF_TWIS2) |
| #define NRF_TWIS3 NRF_PERIPH(NRF_TWIS3) |
| #define NRF_UARTE0 NRF_PERIPH(NRF_UARTE0) |
| #define NRF_UARTE1 NRF_PERIPH(NRF_UARTE1) |
| #define NRF_UARTE2 NRF_PERIPH(NRF_UARTE2) |
| #define NRF_UARTE3 NRF_PERIPH(NRF_UARTE3) |
| #define NRF_VMC NRF_PERIPH(NRF_VMC) |
| #define NRF_WDT NRF_PERIPH(NRF_WDT) |
| |
| /* |
| * The following section provides the name translation for peripherals with |
| * only one type of access available. For these peripherals, you cannot choose |
| * between secure and non-secure mapping. |
| */ |
| #if defined(NRF_TRUSTZONE_NONSECURE) |
| #define NRF_GPIOTE1 NRF_GPIOTE1_NS |
| #else |
| #define NRF_CC_HOST_RGF NRF_CC_HOST_RGF_S |
| #define NRF_CRYPTOCELL NRF_CRYPTOCELL_S |
| #define NRF_CTRL_AP_PERI NRF_CTRL_AP_PERI_S |
| #define NRF_FICR NRF_FICR_S |
| #define NRF_GPIOTE0 NRF_GPIOTE0_S |
| #define NRF_SPU NRF_SPU_S |
| #define NRF_TAD NRF_TAD_S |
| #define NRF_UICR NRF_UICR_S |
| #endif |
| |
| /* Fixup for the GPIOTE driver. */ |
| #if defined(NRF_TRUSTZONE_NONSECURE) |
| #define NRF_GPIOTE NRF_GPIOTE1 |
| #else |
| #define NRF_GPIOTE NRF_GPIOTE0 |
| #endif |
| |
| |
| // <<< Use Configuration Wizard in Context Menu >>>\n |
| |
| // <h> nRF_Drivers |
| |
| // <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver. |
| //========================================================== |
| #ifndef NRFX_CLOCK_ENABLED |
| #define NRFX_CLOCK_ENABLED 0 |
| #endif |
| // <o> NRFX_CLOCK_CONFIG_LF_SRC - LF clock source. |
| |
| // <1=> RC |
| // <2=> XTAL |
| |
| #ifndef NRFX_CLOCK_CONFIG_LF_SRC |
| #define NRFX_CLOCK_CONFIG_LF_SRC 2 |
| #endif |
| |
| // <q> NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED - Enables two-stage LFXO start procedure |
| |
| // <i> If set to a non-zero value, LFRC will be started before LFXO and corresponding |
| // <i> event will be generated. It means that CPU will be woken up when LFRC |
| // <i> oscillator starts, but user callback will be invoked only after LFXO |
| // <i> finally starts. |
| |
| #ifndef NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED |
| #define NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED 0 |
| #endif |
| |
| |
| // <o> NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED |
| #define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL |
| #define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_CLOCK_CONFIG_INFO_COLOR |
| #define NRFX_CLOCK_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR |
| #define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_DPPI_ENABLED - nrfx_dppi - DPPI allocator. |
| //========================================================== |
| #ifndef NRFX_DPPI_ENABLED |
| #define NRFX_DPPI_ENABLED 0 |
| #endif |
| // <e> NRFX_DPPI_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_DPPI_CONFIG_LOG_ENABLED |
| #define NRFX_DPPI_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_DPPI_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_DPPI_CONFIG_LOG_LEVEL |
| #define NRFX_DPPI_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_DPPI_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_DPPI_CONFIG_INFO_COLOR |
| #define NRFX_DPPI_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_DPPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_DPPI_CONFIG_DEBUG_COLOR |
| #define NRFX_DPPI_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_EGU_ENABLED - nrfx_egu - EGU peripheral driver. |
| //========================================================== |
| #ifndef NRFX_EGU_ENABLED |
| #define NRFX_EGU_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU0_ENABLED - Enable EGU0 instance. |
| |
| #ifndef NRFX_EGU0_ENABLED |
| #define NRFX_EGU0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU1_ENABLED - Enable EGU1 instance. |
| |
| #ifndef NRFX_EGU1_ENABLED |
| #define NRFX_EGU1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU2_ENABLED - Enable EGU2 instance. |
| |
| #ifndef NRFX_EGU2_ENABLED |
| #define NRFX_EGU2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU3_ENABLED - Enable EGU3 instance. |
| |
| #ifndef NRFX_EGU3_ENABLED |
| #define NRFX_EGU3_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU4_ENABLED - Enable EGU4 instance. |
| |
| #ifndef NRFX_EGU4_ENABLED |
| #define NRFX_EGU4_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_EGU5_ENABLED - Enable EGU5 instance. |
| |
| #ifndef NRFX_EGU5_ENABLED |
| #define NRFX_EGU5_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver. |
| //========================================================== |
| #ifndef NRFX_GPIOTE_ENABLED |
| #define NRFX_GPIOTE_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS - Number of dedicated handlers |
| #ifndef NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS |
| #define NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS 1 |
| #endif |
| |
| // <o> NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED |
| #define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL |
| #define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR |
| #define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR |
| #define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver. |
| //========================================================== |
| #ifndef NRFX_I2S_ENABLED |
| #define NRFX_I2S_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_I2S_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_I2S_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_I2S_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_I2S_CONFIG_LOG_ENABLED |
| #define NRFX_I2S_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_I2S_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_I2S_CONFIG_LOG_LEVEL |
| #define NRFX_I2S_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_I2S_CONFIG_INFO_COLOR |
| #define NRFX_I2S_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_I2S_CONFIG_DEBUG_COLOR |
| #define NRFX_I2S_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_IPC_ENABLED - nrfx_ipc - IPC peripheral driver |
| //========================================================== |
| #ifndef NRFX_IPC_ENABLED |
| #define NRFX_IPC_ENABLED 0 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver |
| //========================================================== |
| #ifndef NRFX_NVMC_ENABLED |
| #define NRFX_NVMC_ENABLED 0 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver. |
| //========================================================== |
| #ifndef NRFX_PDM_ENABLED |
| #define NRFX_PDM_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_PDM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_PDM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_PDM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PDM_CONFIG_LOG_ENABLED |
| #define NRFX_PDM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PDM_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PDM_CONFIG_LOG_LEVEL |
| #define NRFX_PDM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PDM_CONFIG_INFO_COLOR |
| #define NRFX_PDM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PDM_CONFIG_DEBUG_COLOR |
| #define NRFX_PDM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver. |
| //========================================================== |
| #ifndef NRFX_POWER_ENABLED |
| #define NRFX_POWER_ENABLED 0 |
| #endif |
| // <o> NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing (PRS) module. |
| //========================================================== |
| #ifndef NRFX_PRS_ENABLED |
| #define NRFX_PRS_ENABLED 0 |
| #endif |
| // <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_0_ENABLED |
| #define NRFX_PRS_BOX_0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_1_ENABLED |
| #define NRFX_PRS_BOX_1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_2_ENABLED |
| #define NRFX_PRS_BOX_2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_3_ENABLED |
| #define NRFX_PRS_BOX_3_ENABLED 0 |
| #endif |
| |
| // <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PRS_CONFIG_LOG_ENABLED |
| #define NRFX_PRS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PRS_CONFIG_LOG_LEVEL |
| #define NRFX_PRS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PRS_CONFIG_INFO_COLOR |
| #define NRFX_PRS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PRS_CONFIG_DEBUG_COLOR |
| #define NRFX_PRS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver. |
| //========================================================== |
| #ifndef NRFX_PWM_ENABLED |
| #define NRFX_PWM_ENABLED 0 |
| #endif |
| // <q> NRFX_PWM0_ENABLED - Enables PWM0 instance. |
| |
| |
| #ifndef NRFX_PWM0_ENABLED |
| #define NRFX_PWM0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PWM1_ENABLED - Enables PWM1 instance. |
| |
| |
| #ifndef NRFX_PWM1_ENABLED |
| #define NRFX_PWM1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PWM2_ENABLED - Enables PWM2 instance. |
| |
| |
| #ifndef NRFX_PWM2_ENABLED |
| #define NRFX_PWM2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_PWM3_ENABLED - Enables PWM3 instance. |
| |
| |
| #ifndef NRFX_PWM3_ENABLED |
| #define NRFX_PWM3_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PWM_CONFIG_LOG_ENABLED |
| #define NRFX_PWM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PWM_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PWM_CONFIG_LOG_LEVEL |
| #define NRFX_PWM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PWM_CONFIG_INFO_COLOR |
| #define NRFX_PWM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PWM_CONFIG_DEBUG_COLOR |
| #define NRFX_PWM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver. |
| //========================================================== |
| #ifndef NRFX_RTC_ENABLED |
| #define NRFX_RTC_ENABLED 0 |
| #endif |
| // <q> NRFX_RTC0_ENABLED - Enables RTC0 instance. |
| |
| |
| #ifndef NRFX_RTC0_ENABLED |
| #define NRFX_RTC0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_RTC1_ENABLED - Enables RTC1 instance. |
| |
| |
| #ifndef NRFX_RTC1_ENABLED |
| #define NRFX_RTC1_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_RTC_CONFIG_LOG_ENABLED |
| #define NRFX_RTC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_RTC_CONFIG_LOG_LEVEL |
| #define NRFX_RTC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RTC_CONFIG_INFO_COLOR |
| #define NRFX_RTC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RTC_CONFIG_DEBUG_COLOR |
| #define NRFX_RTC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver. |
| //========================================================== |
| #ifndef NRFX_SAADC_ENABLED |
| #define NRFX_SAADC_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SAADC_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SAADC_CONFIG_LOG_ENABLED |
| #define NRFX_SAADC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SAADC_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SAADC_CONFIG_LOG_LEVEL |
| #define NRFX_SAADC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SAADC_CONFIG_INFO_COLOR |
| #define NRFX_SAADC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR |
| #define NRFX_SAADC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver. |
| //========================================================== |
| #ifndef NRFX_SPIM_ENABLED |
| #define NRFX_SPIM_ENABLED 0 |
| #endif |
| // <q> NRFX_SPIM0_ENABLED - Enables SPIM0 instance. |
| |
| |
| #ifndef NRFX_SPIM0_ENABLED |
| #define NRFX_SPIM0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIM1_ENABLED - Enables SPIM1 instance. |
| |
| |
| #ifndef NRFX_SPIM1_ENABLED |
| #define NRFX_SPIM1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIM2_ENABLED - Enables SPIM2 instance. |
| |
| |
| #ifndef NRFX_SPIM2_ENABLED |
| #define NRFX_SPIM2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIM3_ENABLED - Enables SPIM3 instance. |
| |
| |
| #ifndef NRFX_SPIM3_ENABLED |
| #define NRFX_SPIM3_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPIM_CONFIG_LOG_ENABLED |
| #define NRFX_SPIM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPIM_CONFIG_LOG_LEVEL |
| #define NRFX_SPIM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIM_CONFIG_INFO_COLOR |
| #define NRFX_SPIM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR |
| #define NRFX_SPIM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver. |
| //========================================================== |
| #ifndef NRFX_SPIS_ENABLED |
| #define NRFX_SPIS_ENABLED 0 |
| #endif |
| // <q> NRFX_SPIS0_ENABLED - Enables SPIS0 instance. |
| |
| |
| #ifndef NRFX_SPIS0_ENABLED |
| #define NRFX_SPIS0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIS1_ENABLED - Enables SPIS1 instance. |
| |
| |
| #ifndef NRFX_SPIS1_ENABLED |
| #define NRFX_SPIS1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIS2_ENABLED - Enables SPIS2 instance. |
| |
| |
| #ifndef NRFX_SPIS2_ENABLED |
| #define NRFX_SPIS2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SPIS3_ENABLED - Enables SPIS3 instance. |
| |
| |
| #ifndef NRFX_SPIS3_ENABLED |
| #define NRFX_SPIS3_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPIS_CONFIG_LOG_ENABLED |
| #define NRFX_SPIS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPIS_CONFIG_LOG_LEVEL |
| #define NRFX_SPIS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIS_CONFIG_INFO_COLOR |
| #define NRFX_SPIS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR |
| #define NRFX_SPIS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <q> NRFX_SYSTICK_ENABLED - nrfx_systick - ARM(R) SysTick driver. |
| |
| |
| #ifndef NRFX_SYSTICK_ENABLED |
| #define NRFX_SYSTICK_ENABLED 0 |
| #endif |
| |
| // <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER peripheral driver. |
| //========================================================== |
| #ifndef NRFX_TIMER_ENABLED |
| #define NRFX_TIMER_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TIMER0_ENABLED - Enables TIMER0 instance. |
| |
| #ifndef NRFX_TIMER0_ENABLED |
| #define NRFX_TIMER0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TIMER1_ENABLED - Enables TIMER1 instance. |
| |
| #ifndef NRFX_TIMER1_ENABLED |
| #define NRFX_TIMER1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TIMER2_ENABLED - Enables TIMER2 instance. |
| |
| #ifndef NRFX_TIMER2_ENABLED |
| #define NRFX_TIMER2_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TIMER_CONFIG_LOG_ENABLED |
| #define NRFX_TIMER_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TIMER_CONFIG_LOG_LEVEL |
| #define NRFX_TIMER_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TIMER_CONFIG_INFO_COLOR |
| #define NRFX_TIMER_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR |
| #define NRFX_TIMER_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver. |
| //========================================================== |
| #ifndef NRFX_TWIM_ENABLED |
| #define NRFX_TWIM_ENABLED 0 |
| #endif |
| // <q> NRFX_TWIM0_ENABLED - Enables TWIM0 instance. |
| |
| |
| #ifndef NRFX_TWIM0_ENABLED |
| #define NRFX_TWIM0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIM1_ENABLED - Enables TWIM1 instance. |
| |
| |
| #ifndef NRFX_TWIM1_ENABLED |
| #define NRFX_TWIM1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIM2_ENABLED - Enables TWIM2 instance. |
| |
| |
| #ifndef NRFX_TWIM2_ENABLED |
| #define NRFX_TWIM2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIM3_ENABLED - Enables TWIM3 instance. |
| |
| |
| #ifndef NRFX_TWIM3_ENABLED |
| #define NRFX_TWIM3_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWIM_CONFIG_LOG_ENABLED |
| #define NRFX_TWIM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWIM_CONFIG_LOG_LEVEL |
| #define NRFX_TWIM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIM_CONFIG_INFO_COLOR |
| #define NRFX_TWIM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR |
| #define NRFX_TWIM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver. |
| //========================================================== |
| #ifndef NRFX_TWIS_ENABLED |
| #define NRFX_TWIS_ENABLED 0 |
| #endif |
| // <q> NRFX_TWIS0_ENABLED - Enables TWIS0 instance. |
| |
| |
| #ifndef NRFX_TWIS0_ENABLED |
| #define NRFX_TWIS0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIS1_ENABLED - Enables TWIS1 instance. |
| |
| |
| #ifndef NRFX_TWIS1_ENABLED |
| #define NRFX_TWIS1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIS2_ENABLED - Enables TWIS2 instance. |
| |
| |
| #ifndef NRFX_TWIS2_ENABLED |
| #define NRFX_TWIS2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIS3_ENABLED - Enables TWIS3 instance. |
| |
| |
| #ifndef NRFX_TWIS3_ENABLED |
| #define NRFX_TWIS3_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assumes that any instance would be initialized only once. |
| |
| |
| // <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. |
| |
| #ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY |
| #define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0 |
| #endif |
| |
| // <q> NRFX_TWIS_NO_SYNC_MODE - Removes support for synchronous mode. |
| |
| // <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. |
| |
| #ifndef NRFX_TWIS_NO_SYNC_MODE |
| #define NRFX_TWIS_NO_SYNC_MODE 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWIS_CONFIG_LOG_ENABLED |
| #define NRFX_TWIS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWIS_CONFIG_LOG_LEVEL |
| #define NRFX_TWIS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIS_CONFIG_INFO_COLOR |
| #define NRFX_TWIS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR |
| #define NRFX_TWIS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver. |
| //========================================================== |
| #ifndef NRFX_UARTE_ENABLED |
| #define NRFX_UARTE_ENABLED 0 |
| #endif |
| // <q> NRFX_UARTE0_ENABLED - Enables UARTE0 instances |
| #ifndef NRFX_UARTE0_ENABLED |
| #define NRFX_UARTE0_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_UARTE1_ENABLED - Enables UARTE1 instance. |
| #ifndef NRFX_UARTE1_ENABLED |
| #define NRFX_UARTE1_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_UARTE2_ENABLED - Enables UARTE2 instance. |
| #ifndef NRFX_UARTE2_ENABLED |
| #define NRFX_UARTE2_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_UARTE3_ENABLED - Enables UARTE3 instance. |
| #ifndef NRFX_UARTE3_ENABLED |
| #define NRFX_UARTE3_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_UARTE_CONFIG_LOG_ENABLED |
| #define NRFX_UARTE_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_UARTE_CONFIG_LOG_LEVEL |
| #define NRFX_UARTE_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UARTE_CONFIG_INFO_COLOR |
| #define NRFX_UARTE_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR |
| #define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver. |
| //========================================================== |
| #ifndef NRFX_WDT_ENABLED |
| #define NRFX_WDT_ENABLED 0 |
| #endif |
| // <q> NRFX_WDT0_ENABLED - Enable WDT0 instance. |
| |
| |
| #ifndef NRFX_WDT0_ENABLED |
| #define NRFX_WDT0_ENABLED 0 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver. |
| |
| // <0=> Include WDT IRQ handling |
| // <1=> Remove WDT IRQ handling |
| |
| #ifndef NRFX_WDT_CONFIG_NO_IRQ |
| #define NRFX_WDT_CONFIG_NO_IRQ 0 |
| #endif |
| |
| // <o> NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority. |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_WDT_CONFIG_LOG_ENABLED |
| #define NRFX_WDT_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default severity level. |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_WDT_CONFIG_LOG_LEVEL |
| #define NRFX_WDT_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_WDT_CONFIG_INFO_COLOR |
| #define NRFX_WDT_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_WDT_CONFIG_DEBUG_COLOR |
| #define NRFX_WDT_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // </h> |
| |
| #endif // NRFX_CONFIG_NRF9160_H__ |
