/*
 * Copyright (c) 2021 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <nordic/nrf5340_cpunet_qkaa.dtsi>
#include "thingy53_nrf5340_cpunet-pinctrl.dtsi"

/ {
	model = "Nordic Thingy53 NRF5340 Network";
	compatible = "nordic,thingy53-nrf5340-cpunet";

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-mcumgr = &uart0;
		zephyr,bt-mon-uart = &uart0;
		zephyr,bt-c2h-uart = &uart0;
		zephyr,sram = &sram1;
		zephyr,flash = &flash1;
		zephyr,code-partition = &slot0_partition;
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			gpios = <&gpio1 14 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 1";
		};
		button1: button_1 {
			gpios = <&gpio1 13 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 2";
		};
	};

	leds {
		compatible = "gpio-leds";
		red_led: led_1 {
			gpios = <&gpio1 8 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
			label = "RGB red LED";
		};
		green_led: led_2 {
			gpios = <&gpio1 6 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
			label = "RGB green LED";
		};
		blue_led: led_3 {
			gpios = <&gpio1 7 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
			label = "RGB blue LED";
		};
	};

	nrf_radio_fem: fem {
		compatible = "nordic,nrf21540-fem";
		rx-en-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
		mode-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		pdn-gpios   = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		tx-en-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
	};

	aliases {
		sw0 = &button0;
		sw1 = &button1;
		led0 = &red_led;
		led1 = &green_led;
		led2 = &blue_led;
	};
};

&gpiote {
	status = "okay";
};

&gpio0 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&uart0 {
	compatible = "nordic,nrf-uarte";
	status = "disabled";
	current-speed = <115200>;
	pinctrl-0 = <&uart0_default>;
	pinctrl-1 = <&uart0_sleep>;
	pinctrl-names = "default", "sleep";
};

&timer0 {
	status = "okay";
};

&timer1 {
	status = "okay";
};

&timer2 {
	status = "okay";
};

&flash1 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 0xc000>;
		};
		slot0_partition: partition@c000 {
			label = "image-0";
			reg = <0x0000C000 0x12000>;
		};
		slot1_partition: partition@1e000 {
			label = "image-1";
			reg = <0x0001E000 0x12000>;
		};
		scratch_partition: partition@30000 {
			label = "image-scratch";
			reg = <0x00030000 0xa000>;
		};
		storage_partition: partition@3a000 {
			label = "storage";
			reg = <0x0003a000 0x6000>;
		};
	};
};

/* Include shared RAM configuration file */
#include "thingy53_nrf5340_shared_sram_planning_conf.dts"