MQTT Library Test
-----------------

This MQTT application tests the low-level API for packet handling.
No network activity is involved in this test, so ** theoretically **
it can be run on almost any board already supported by Zephyr and
with enough RAM/ROM.

Build and Run
-------------

* QEMU x86

  Build & run:
  mkdir build; cd build
  cmake -DBOARD=qemu_x86 ..
  make run

* NXP Freedom-K64F (frdm-k64f)

  Build:
  mkdir build; cd build
  cmake -DBOARD=frdm_k64f ..
  make run

  Firmware version:
  Version: 0226
  Build:   Aug 24 2015 17:06:30
  Git Commit SHA: 27a236b9fe39c674a703c5c89655fbd26b8e27e1
  Git Local mods: Yes

  For more information about this board, see:
  https://developer.mbed.org/platforms/frdm-k64f/

Sample Output
-------------

To exit from QEMU enter: 'CTRL+a, x'
[QEMU] CPU: qemu32
tc_start() - MQTT Library test
[PASS] 1 - CONNECT, new session, zeros
[PASS] 2 - CONNECT, new session, will
[PASS] 3 - CONNECT, new session, will retain
[PASS] 4 - CONNECT, new session, will qos = 1
[PASS] 5 - CONNECT, new session, will qos = 1, will retain
[PASS] 6 - CONNECT, new session, username and password
[PASS] 7 - DISCONNECT
[PASS] 8 - PUBLISH, qos = 0
[PASS] 9 - PUBLISH, retain = 1
[PASS] 10 - PUBLISH, retain = 1, qos = 1
[PASS] 11 - PUBLISH, qos = 2
[PASS] 12 - SUBSCRIBE, one topic, qos = 0
[PASS] 13 - SUBSCRIBE, one topic, qos = 1
[PASS] 14 - SUBSCRIBE, one topic, qos = 2
[PASS] 15 - SUBACK, one topic, qos = 0
[PASS] 16 - SUBACK, one topic, qos = 1
[PASS] 17 - SUBACK, one topic, qos = 2
[PASS] 18 - PINGREQ
[PASS] 19 - PUBACK
[PASS] 20 - PUBREC
[PASS] 21 - PUBREL
[PASS] 22 - PUBCOMP
[PASS] 23 - UNSUBACK
===================================================================
PASS - main.
===================================================================
PROJECT EXECUTION SUCCESSFUL