/*
 * Copyright (c) 2017 Jean-Paul Etienne <fractalclone@gmail.com>
 * Contributors: 2018 Antmicro <www.antmicro.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @brief Platform Level Interrupt Controller (PLIC) driver
 *        for RISC-V processors
 */

#include <kernel.h>
#include <arch/cpu.h>
#include <init.h>
#include <soc.h>

#include <sw_isr_table.h>

#define PLIC_IRQS        (CONFIG_NUM_IRQS - CONFIG_2ND_LVL_ISR_TBL_OFFSET)
#define PLIC_EN_SIZE     ((PLIC_IRQS >> 5) + 1)

struct plic_regs_t {
	u32_t threshold_prio;
	u32_t claim_complete;
};

static int save_irq;

/**
 *
 * @brief Enable a riscv PLIC-specific interrupt line
 *
 * This routine enables a RISCV PLIC-specific interrupt line.
 * riscv_plic_irq_enable is called by SOC_FAMILY_RISCV_PRIVILEGE
 * z_arch_irq_enable function to enable external interrupts for
 * IRQS level == 2, whenever CONFIG_RISCV_HAS_PLIC variable is set.
 * @param irq IRQ number to enable
 *
 * @return N/A
 */
void riscv_plic_irq_enable(u32_t irq)
{
	u32_t key;
	volatile u32_t *en =
		(volatile u32_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_IRQ_EN_BASE_ADDRESS;

	key = irq_lock();
	en += (irq >> 5);
	*en |= (1 << (irq & 31));
	irq_unlock(key);
}

/**
 *
 * @brief Disable a riscv PLIC-specific interrupt line
 *
 * This routine disables a RISCV PLIC-specific interrupt line.
 * riscv_plic_irq_disable is called by SOC_FAMILY_RISCV_PRIVILEGE
 * z_arch_irq_disable function to disable external interrupts, for
 * IRQS level == 2, whenever CONFIG_RISCV_HAS_PLIC variable is set.
 * @param irq IRQ number to disable
 *
 * @return N/A
 */
void riscv_plic_irq_disable(u32_t irq)
{
	u32_t key;
	volatile u32_t *en =
		(volatile u32_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_IRQ_EN_BASE_ADDRESS;

	key = irq_lock();
	en += (irq >> 5);
	*en &= ~(1 << (irq & 31));
	irq_unlock(key);
}

/**
 *
 * @brief Check if a riscv PLIC-specific interrupt line is enabled
 *
 * This routine checks if a RISCV PLIC-specific interrupt line is enabled.
 * @param irq IRQ number to check
 *
 * @return 1 or 0
 */
int riscv_plic_irq_is_enabled(u32_t irq)
{
	volatile u32_t *en =
		(volatile u32_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_IRQ_EN_BASE_ADDRESS;

	en += (irq >> 5);
	return !!(*en & (1 << (irq & 31)));
}

/**
 *
 * @brief Set priority of a riscv PLIC-specific interrupt line
 *
 * This routine set the priority of a RISCV PLIC-specific interrupt line.
 * riscv_plic_irq_set_prio is called by riscv z_arch_irq_priority_set to set
 * the priority of an interrupt whenever CONFIG_RISCV_HAS_PLIC variable is set.
 * @param irq IRQ number for which to set priority
 *
 * @return N/A
 */
void riscv_plic_set_priority(u32_t irq, u32_t priority)
{
	volatile u32_t *prio =
		(volatile u32_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_PRIO_BASE_ADDRESS;

	if (priority > DT_INST_0_SIFIVE_PLIC_1_0_0_RISCV_MAX_PRIORITY)
		priority = DT_INST_0_SIFIVE_PLIC_1_0_0_RISCV_MAX_PRIORITY;

	prio += irq;
	*prio = priority;
}

/**
 *
 * @brief Get riscv PLIC-specific interrupt line causing an interrupt
 *
 * This routine returns the RISCV PLIC-specific interrupt line causing an
 * interrupt.
 * @param irq IRQ number for which to set priority
 *
 * @return N/A
 */
int riscv_plic_get_irq(void)
{
	return save_irq;
}

static void plic_irq_handler(void *arg)
{
	volatile struct plic_regs_t *regs =
	    (volatile struct plic_regs_t *) DT_INST_0_SIFIVE_PLIC_1_0_0_REG_BASE_ADDRESS;

	u32_t irq;
	struct _isr_table_entry *ite;

	/* Get the IRQ number generating the interrupt */
	irq = regs->claim_complete;

	/*
	 * Save IRQ in save_irq. To be used, if need be, by
	 * subsequent handlers registered in the _sw_isr_table table,
	 * as IRQ number held by the claim_complete register is
	 * cleared upon read.
	 */
	save_irq = irq;

	/*
	 * If the IRQ is out of range, call z_irq_spurious.
	 * A call to z_irq_spurious will not return.
	 */
	if (irq == 0U || irq >= PLIC_IRQS)
		z_irq_spurious(NULL);

	irq += CONFIG_2ND_LVL_ISR_TBL_OFFSET;

	/* Call the corresponding IRQ handler in _sw_isr_table */
	ite = (struct _isr_table_entry *)&_sw_isr_table[irq];
	ite->isr(ite->arg);

	/*
	 * Write to claim_complete register to indicate to
	 * PLIC controller that the IRQ has been handled.
	 */
	regs->claim_complete = save_irq;
}

/**
 *
 * @brief Initialize the Platform Level Interrupt Controller
 * @return N/A
 */
static int plic_init(struct device *dev)
{
	ARG_UNUSED(dev);

	volatile u32_t *en =
		(volatile u32_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_IRQ_EN_BASE_ADDRESS;
	volatile u32_t *prio =
		(volatile u32_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_PRIO_BASE_ADDRESS;
	volatile struct plic_regs_t *regs =
	    (volatile struct plic_regs_t *)DT_INST_0_SIFIVE_PLIC_1_0_0_REG_BASE_ADDRESS;
	int i;

	/* Ensure that all interrupts are disabled initially */
	for (i = 0; i < PLIC_EN_SIZE; i++) {
		*en = 0U;
		en++;
	}

	/* Set priority of each interrupt line to 0 initially */
	for (i = 0; i < PLIC_IRQS; i++) {
		*prio = 0U;
		prio++;
	}

	/* Set threshold priority to 0 */
	regs->threshold_prio = 0U;

	/* Setup IRQ handler for PLIC driver */
	IRQ_CONNECT(RISCV_MACHINE_EXT_IRQ,
		    0,
		    plic_irq_handler,
		    NULL,
		    0);

	/* Enable IRQ for PLIC driver */
	irq_enable(RISCV_MACHINE_EXT_IRQ);

	return 0;
}

SYS_INIT(plic_init, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT);