| # Texas Instruments SimpleLink CC13x2 / CC26x2 |
| |
| # Copyright (c) 2019 Brett Witherspoon |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| choice |
| prompt "TI SimpleLink MCU Selection" |
| depends on SOC_SERIES_CC13X2_CC26X2 |
| |
| config SOC_CC2652R |
| bool "CC2652R" |
| |
| config SOC_CC1352R |
| bool "CC1352R" |
| |
| endchoice |
| |
| menu "Customer Configuration (CCFG)" |
| depends on SOC_SERIES_CC13X2_CC26X2 |
| |
| config CC13X2_CC26X2_BOOTLOADER_ENABLE |
| bool "ROM bootloader" |
| help |
| Enable the serial bootloader which resides in ROM on CC13xx / CC26xx |
| devices. |
| |
| config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE |
| bool "ROM bootloader backdoor" |
| depends on CC13X2_CC26X2_BOOTLOADER_ENABLE |
| help |
| Enable the ROM bootloader backdoor which starts the bootloader if the |
| associated pin is at the correct logic level on reset. |
| |
| config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_PIN |
| int "ROM bootloader backdoor pin" |
| depends on CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE |
| range 0 255 |
| default 255 |
| help |
| Set the pin that is level checked if the bootloader backdoor is |
| enabled. |
| |
| config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_LEVEL |
| int "ROM bootloader backdoor level" |
| depends on CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE |
| range 0 1 |
| default 0 |
| help |
| Set the active level of the pin selected for the bootloader backdoor. |
| |
| endmenu |
