/*
 * Copyright (c) 2019 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <nordic/nrf_common.dtsi>

/ {
	chosen {
		zephyr,entropy = &rng;
		zephyr,flash-controller = &flash_controller;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m4f";
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <1>;

			itm: itm@e0000000 {
				compatible = "arm,armv7m-itm";
				reg = <0xe0000000 0x1000>;
				swo-ref-frequency = <32000000>;
			};
		};
	};

	soc {
		ficr: ficr@10000000 {
			compatible = "nordic,nrf-ficr";
			reg = <0x10000000 0x1000>;
			#nordic,ficr-cells = <1>;
			status = "okay";
		};

		uicr: uicr@10001000 {
			compatible = "nordic,nrf-uicr";
			reg = <0x10001000 0x1000>;
			status = "okay";
		};

		sram0: memory@20000000 {
			compatible = "mmio-sram";
		};

		clock: clock@40000000 {
			compatible = "nordic,nrf-clock";
			reg = <0x40000000 0x1000>;
			interrupts = <0 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		power: power@40000000 {
			compatible = "nordic,nrf-power";
			reg = <0x40000000 0x1000>;
			interrupts = <0 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
			#address-cells = <1>;
			#size-cells = <1>;

			gpregret1: gpregret1@4000051c {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "nordic,nrf-gpregret";
				reg = <0x4000051c 0x1>;
				status = "okay";
			};

			gpregret2: gpregret2@40000520 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "nordic,nrf-gpregret";
				reg = <0x40000520 0x1>;
				status = "okay";
			};
		};

		radio: radio@40001000 {
			compatible = "nordic,nrf-radio";
			reg = <0x40001000 0x1000>;
			interrupts = <1 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
			dfe-supported;
			ieee802154-supported;
			ble-2mbps-supported;
			ble-coded-phy-supported;
			tx-high-power-supported;

			ieee802154: ieee802154 {
				compatible = "nordic,nrf-ieee802154";
				status = "disabled";
			};
		};

		uart0: uart@40002000 {
			/* uart can be either UART or UARTE, for the user to pick */
			/* compatible = "nordic,nrf-uarte" or "nordic,nrf-uart"; */
			compatible = "nordic,nrf-uarte";
			reg = <0x40002000 0x1000>;
			interrupts = <2 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
		};

		i2c0: i2c@40003000 {
			/*
			 * This i2c node can be TWI, TWIM, or TWIS,
			 * for the user to pick:
			 * compatible = "nordic,nrf-twi" or
			 *              "nordic,nrf-twim" or
			 *              "nordic,nrf-twis".
			 */
			compatible = "nordic,nrf-twim";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40003000 0x1000>;
			clock-frequency = <I2C_BITRATE_STANDARD>;
			interrupts = <3 NRF_DEFAULT_IRQ_PRIORITY>;
			easydma-maxcnt-bits = <16>;
			status = "disabled";
		};

		spi0: spi@40003000 {
			/*
			 * This spi node can be SPI, SPIM, or SPIS,
			 * for the user to pick:
			 * compatible = "nordic,nrf-spi" or
			 *              "nordic,nrf-spim" or
			 *              "nordic,nrf-spis".
			 */
			compatible = "nordic,nrf-spim";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40003000 0x1000>;
			interrupts = <3 NRF_DEFAULT_IRQ_PRIORITY>;
			max-frequency = <DT_FREQ_M(8)>;
			easydma-maxcnt-bits = <16>;
			status = "disabled";
		};

		i2c1: i2c@40004000 {
			/*
			 * This i2c node can be TWI, TWIM, or TWIS,
			 * for the user to pick:
			 * compatible = "nordic,nrf-twi" or
			 *              "nordic,nrf-twim" or
			 *              "nordic,nrf-twis".
			 */
			compatible = "nordic,nrf-twim";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40004000 0x1000>;
			clock-frequency = <I2C_BITRATE_STANDARD>;
			interrupts = <4 NRF_DEFAULT_IRQ_PRIORITY>;
			easydma-maxcnt-bits = <16>;
			status = "disabled";
		};

		spi1: spi@40004000 {
			/*
			 * This spi node can be SPI, SPIM, or SPIS,
			 * for the user to pick:
			 * compatible = "nordic,nrf-spi" or
			 *              "nordic,nrf-spim" or
			 *              "nordic,nrf-spis".
			 */
			compatible = "nordic,nrf-spim";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40004000 0x1000>;
			interrupts = <4 NRF_DEFAULT_IRQ_PRIORITY>;
			max-frequency = <DT_FREQ_M(8)>;
			easydma-maxcnt-bits = <16>;
			status = "disabled";
		};

		nfct: nfct@40005000 {
			compatible = "nordic,nrf-nfct";
			reg = <0x40005000 0x1000>;
			interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
		};

		gpiote: gpiote0: gpiote@40006000 {
			compatible = "nordic,nrf-gpiote";
			reg = <0x40006000 0x1000>;
			interrupts = <6 5>;
			status = "disabled";
			instance = <0>;
		};

		adc: adc@40007000 {
			compatible = "nordic,nrf-saadc";
			reg = <0x40007000 0x1000>;
			interrupts = <7 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			#io-channel-cells = <1>;
		};

		timer0: timer@40008000 {
			compatible = "nordic,nrf-timer";
			status = "disabled";
			reg = <0x40008000 0x1000>;
			cc-num = <4>;
			max-bit-width = <32>;
			interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>;
			prescaler = <0>;
		};

		timer1: timer@40009000 {
			compatible = "nordic,nrf-timer";
			status = "disabled";
			reg = <0x40009000 0x1000>;
			cc-num = <4>;
			max-bit-width = <32>;
			interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>;
			prescaler = <0>;
		};

		timer2: timer@4000a000 {
			compatible = "nordic,nrf-timer";
			status = "disabled";
			reg = <0x4000a000 0x1000>;
			cc-num = <4>;
			max-bit-width = <32>;
			interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>;
			prescaler = <0>;
		};

		rtc0: rtc@4000b000 {
			compatible = "nordic,nrf-rtc";
			reg = <0x4000b000 0x1000>;
			cc-num = <3>;
			interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			clock-frequency = <32768>;
			prescaler = <1>;
		};

		temp: temp@4000c000 {
			compatible = "nordic,nrf-temp";
			reg = <0x4000c000 0x1000>;
			interrupts = <12 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		rng: random@4000d000 {
			compatible = "nordic,nrf-rng";
			reg = <0x4000d000 0x1000>;
			interrupts = <13 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		ecb: ecb@4000e000 {
			compatible = "nordic,nrf-ecb";
			reg = <0x4000e000 0x1000>;
			interrupts = <14 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		ccm: ccm@4000f000 {
			compatible = "nordic,nrf-ccm";
			reg = <0x4000f000 0x1000>;
			interrupts = <15 NRF_DEFAULT_IRQ_PRIORITY>;
			length-field-length-8-bits;
			headermask-supported;
			status = "okay";
		};

		wdt: wdt0: watchdog@40010000 {
			compatible = "nordic,nrf-wdt";
			reg = <0x40010000 0x1000>;
			interrupts = <16 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		rtc1: rtc@40011000 {
			compatible = "nordic,nrf-rtc";
			reg = <0x40011000 0x1000>;
			cc-num = <4>;
			interrupts = <17 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			clock-frequency = <32768>;
			prescaler = <1>;
		};

		qdec: qdec0: qdec@40012000 {
			compatible = "nordic,nrf-qdec";
			reg = <0x40012000 0x1000>;
			interrupts = <18 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
		};

		comp: comparator@40013000 {
			/*
			 * This comparator node can be COMP or LPCOMP,
			 * for the user to pick:
			 * compatible = "nordic,nrf-comp" or
			 *              "nordic,nrf-lpcomp".
			 */
			compatible = "nordic,nrf-comp";
			reg = <0x40013000 0x1000>;
			interrupts = <19 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			#io-channel-cells = <1>;
		};

		egu0: swi0: egu@40014000 {
			compatible = "nordic,nrf-egu", "nordic,nrf-swi";
			reg = <0x40014000 0x1000>;
			interrupts = <20 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		egu1: swi1: egu@40015000 {
			compatible = "nordic,nrf-egu", "nordic,nrf-swi";
			reg = <0x40015000 0x1000>;
			interrupts = <21 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		egu2: swi2: egu@40016000 {
			compatible = "nordic,nrf-egu", "nordic,nrf-swi";
			reg = <0x40016000 0x1000>;
			interrupts = <22 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		egu3: swi3: egu@40017000 {
			compatible = "nordic,nrf-egu", "nordic,nrf-swi";
			reg = <0x40017000 0x1000>;
			interrupts = <23 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		egu4: swi4: egu@40018000 {
			compatible = "nordic,nrf-egu", "nordic,nrf-swi";
			reg = <0x40018000 0x1000>;
			interrupts = <24 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		egu5: swi5: egu@40019000 {
			compatible = "nordic,nrf-egu", "nordic,nrf-swi";
			reg = <0x40019000 0x1000>;
			interrupts = <25 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "okay";
		};

		timer3: timer@4001a000 {
			compatible = "nordic,nrf-timer";
			status = "disabled";
			reg = <0x4001a000 0x1000>;
			cc-num = <6>;
			max-bit-width = <32>;
			interrupts = <26 NRF_DEFAULT_IRQ_PRIORITY>;
			prescaler = <0>;
		};

		timer4: timer@4001b000 {
			compatible = "nordic,nrf-timer";
			status = "disabled";
			reg = <0x4001b000 0x1000>;
			cc-num = <6>;
			max-bit-width = <32>;
			interrupts = <27 NRF_DEFAULT_IRQ_PRIORITY>;
			prescaler = <0>;
		};

		pwm0: pwm@4001c000 {
			compatible = "nordic,nrf-pwm";
			reg = <0x4001c000 0x1000>;
			interrupts = <28 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		pdm0: pdm@4001d000 {
			compatible = "nordic,nrf-pdm";
			reg = <0x4001d000 0x1000>;
			interrupts = <29 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
		};

		acl: acl@4001e000 {
			compatible = "nordic,nrf-acl";
			reg = <0x4001e000 0x1000>;
			status = "okay";
		};

		flash_controller: flash-controller@4001e000 {
			compatible = "nordic,nrf52-flash-controller";
			reg = <0x4001e000 0x1000>;
			partial-erase;

			#address-cells = <1>;
			#size-cells = <1>;


			flash0: flash@0 {
				compatible = "soc-nv-flash";
				erase-block-size = <4096>;
				write-block-size = <4>;
			};
		};

		ppi: ppi@4001f000 {
			compatible = "nordic,nrf-ppi";
			reg = <0x4001f000 0x1000>;
			status = "okay";
		};

		mwu: mwu@40020000 {
			compatible = "nordic,nrf-mwu";
			reg = <0x40020000 0x1000>;
			status = "okay";
		};

		pwm1: pwm@40021000 {
			compatible = "nordic,nrf-pwm";
			reg = <0x40021000 0x1000>;
			interrupts = <33 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		pwm2: pwm@40022000 {
			compatible = "nordic,nrf-pwm";
			reg = <0x40022000 0x1000>;
			interrupts = <34 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		spi2: spi@40023000 {
			/*
			 * This spi node can be SPI, SPIM, or SPIS,
			 * for the user to pick:
			 * compatible = "nordic,nrf-spi" or
			 *              "nordic,nrf-spim" or
			 *              "nordic,nrf-spis".
			 */
			compatible = "nordic,nrf-spim";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40023000 0x1000>;
			interrupts = <35 NRF_DEFAULT_IRQ_PRIORITY>;
			max-frequency = <DT_FREQ_M(8)>;
			easydma-maxcnt-bits = <16>;
			status = "disabled";
		};

		rtc2: rtc@40024000 {
			compatible = "nordic,nrf-rtc";
			reg = <0x40024000 0x1000>;
			cc-num = <4>;
			interrupts = <36 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			clock-frequency = <32768>;
			prescaler = <1>;
		};

		i2s0: i2s@40025000 {
			compatible = "nordic,nrf-i2s";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40025000 0x1000>;
			interrupts = <37 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
		};

		usbd: usbd@40027000 {
			compatible = "nordic,nrf-usbd";
			reg = <0x40027000 0x1000>;
			interrupts = <39 NRF_DEFAULT_IRQ_PRIORITY>;
			num-bidir-endpoints = <1>;
			num-in-endpoints = <7>;
			num-out-endpoints = <7>;
			num-isoin-endpoints = <1>;
			num-isoout-endpoints = <1>;
			status = "disabled";
		};

		uart1: uart@40028000 {
			compatible = "nordic,nrf-uarte";
			reg = <0x40028000 0x1000>;
			interrupts = <40 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
		};

		pwm3: pwm@4002d000 {
			compatible = "nordic,nrf-pwm";
			reg = <0x4002d000 0x1000>;
			interrupts = <45 NRF_DEFAULT_IRQ_PRIORITY>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		spi3: spi@4002f000 {
			compatible = "nordic,nrf-spim";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x4002f000 0x1000>;
			interrupts = <47 NRF_DEFAULT_IRQ_PRIORITY>;
			max-frequency = <DT_FREQ_M(32)>;
			easydma-maxcnt-bits = <16>;
			rx-delay-supported;
			rx-delay = <2>;
			status = "disabled";
		};

		gpio0: gpio@50000000 {
			compatible = "nordic,nrf-gpio";
			gpio-controller;
			reg = <0x50000000 0x200
			       0x50000500 0x300>;
			#gpio-cells = <2>;
			status = "disabled";
			port = <0>;
			gpiote-instance = <&gpiote>;
		};

		gpio1: gpio@50000300 {
			compatible = "nordic,nrf-gpio";
			gpio-controller;
			reg = <0x50000300 0x200
			       0x50000800 0x300>;
			#gpio-cells = <2>;
			ngpios = <10>;
			status = "disabled";
			port = <1>;
			gpiote-instance = <&gpiote>;
		};
	};
};

&nvic {
	arm,num-irq-priority-bits = <3>;
};

&systick {
	/* Use RTC for system clock, instead of SysTick. */
	status = "disabled";
};