# NXP S32K1XX MCUs series

# Copyright 2023-2024 NXP
# SPDX-License-Identifier: Apache-2.0

config SOC_SERIES_S32K1
	select ARM
	select HAS_NXP_S32_HAL
	select HAS_MCUX
	select CPU_HAS_NXP_MPU
	select CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS
	select MPU_ALLOW_FLASH_WRITE if !XIP
	select CLOCK_CONTROL
	select HAS_MCUX_LPUART
	select HAS_MCUX_LPI2C
	select HAS_MCUX_LPSPI
	select HAS_MCUX_FTM
	select HAS_MCUX_FLEXCAN
	select HAS_MCUX_WDOG32
	select HAS_MCUX_RTC

config SOC_S32K116
	select CPU_CORTEX_M0PLUS

config SOC_S32K118
	select CPU_CORTEX_M0PLUS

config SOC_S32K142
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_MCUX_CACHE

config SOC_S32K142W
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_MCUX_CACHE

config SOC_S32K144
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_MCUX_CACHE

config SOC_S32K144W
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_MCUX_CACHE

config SOC_S32K146
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_MCUX_CACHE

config SOC_S32K148
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_MCUX_CACHE

if SOC_SERIES_S32K1

config WDOG_INIT
	bool
	default y

config NXP_S32_FLASH_CONFIG
	bool "NXP S32 flash configuration field"
	default y if XIP && !BOOTLOADER_MCUBOOT
	help
	  Include the 16-byte flash configuration field that stores default
	  protection settings (loaded on reset) and security information that
	  allows the MCU to restrict access to the FTFx module.

if NXP_S32_FLASH_CONFIG

config NXP_S32_FLASH_CONFIG_OFFSET
	hex "NXP S32 flash configuration field offset"
	default 0x400

config NXP_S32_FLASH_CONFIG_FSEC
	hex "Flash security byte (FSEC)"
	range 0 0xff
	default 0xfe
	help
	  Configures the reset value of the FSEC register, which includes
	  backdoor key access, mass erase, factory access, and flash security
	  options.

config NXP_S32_FLASH_CONFIG_FOPT
	hex "Flash nonvolatile option byte (FOPT)"
	range 0 0xff
	default 0xff
	help
	  Configures the reset value of the FOPT register, which includes boot,
	  NMI, and EzPort options.

config NXP_S32_FLASH_CONFIG_FEPROT
	hex "EEPROM protection byte (FEPROT)"
	range 0 0xff
	default 0xff
	help
	  Configures the reset value of the FEPROT register for FlexNVM
	  devices. For program flash only devices, this byte is reserved.

config NXP_S32_FLASH_CONFIG_FDPROT
	hex "Data flash protection byte (FDPROT)"
	range 0 0xff
	default 0xff
	help
	  Configures the reset value of the FDPROT register for FlexNVM
	  devices. For program flash only devices, this byte is reserved.

endif # NXP_S32_FLASH_CONFIG

config NXP_S32_ENABLE_CODE_CACHE
	bool "Code cache"
	default y
	depends on HAS_MCUX_CACHE

endif # SOC_SERIES_S32K1