# Kconfig - Atmel SAM E70 MCU series configuration options
#
# Copyright (c) 2016 Piotr Mienkowski
# SPDX-License-Identifier: Apache-2.0
#

if SOC_SERIES_SAME70

config SOC_SERIES
	string
	default same70

config SOC_PART_NUMBER
	string
	default same70q21 if SOC_PART_NUMBER_SAME70Q21
	default same70q20 if SOC_PART_NUMBER_SAME70Q20
	default same70q19 if SOC_PART_NUMBER_SAME70Q19
	default same70n21 if SOC_PART_NUMBER_SAME70N21
	default same70n20 if SOC_PART_NUMBER_SAME70N20
	default same70n19 if SOC_PART_NUMBER_SAME70N19
	default same70j21 if SOC_PART_NUMBER_SAME70J21
	default same70j20 if SOC_PART_NUMBER_SAME70J20
	default same70j19 if SOC_PART_NUMBER_SAME70J19

config NUM_IRQ_PRIO_BITS
	int
	default 3

#
# SAM E70 family has in total 71 peripherals capable of generating interrupts
# (not all Peripheral Identifiers are used).
#
config NUM_IRQS
	int
	default 71

config SYS_CLOCK_HW_CYCLES_PER_SEC
	int
	default 300000000

#
# SRAM size and base address
#
config SRAM_BASE_ADDRESS
	hex
	default 0x20400000

config SRAM_SIZE
	int
	default 256 if SOC_PART_NUMBER_SAME70Q19 || SOC_PART_NUMBER_SAME70N19 || SOC_PART_NUMBER_SAME70J19
	default 384 if SOC_PART_NUMBER_SAME70Q20 || SOC_PART_NUMBER_SAME70N20 || SOC_PART_NUMBER_SAME70J20
	default 384 if SOC_PART_NUMBER_SAME70Q21 || SOC_PART_NUMBER_SAME70N21 || SOC_PART_NUMBER_SAME70J21

#
# Flash size and base address
#
config FLASH_BASE_ADDRESS
	hex
	default 0x00400000

config FLASH_SIZE
	int
	default  512 if SOC_PART_NUMBER_SAME70Q19 || SOC_PART_NUMBER_SAME70N19 || SOC_PART_NUMBER_SAME70J19
	default 1024 if SOC_PART_NUMBER_SAME70Q20 || SOC_PART_NUMBER_SAME70N20 || SOC_PART_NUMBER_SAME70J20
	default 2048 if SOC_PART_NUMBER_SAME70Q21 || SOC_PART_NUMBER_SAME70N21 || SOC_PART_NUMBER_SAME70J21

endif # SOC_SERIES_SAME70