| # Kconfig - HDC1008 temperature and humidity sensor configuration options |
| |
| # |
| # Copyright (c) 2016 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig HDC1008 |
| bool |
| prompt "HDC1008 Temperature and Humidity Sensor" |
| depends on I2C && GPIO |
| default n |
| help |
| Enable driver for HDC1008 temperature and humidity sensors. |
| |
| config HDC1008_NAME |
| string |
| prompt "Driver name" |
| default "HDC1008" |
| depends on HDC1008 |
| help |
| Device name with which the HDC1008 sensor is identified. |
| |
| config HDC1008_I2C_ADDR |
| hex |
| prompt "I2C Address for HDC1008" |
| depends on HDC1008 |
| default "0x40" |
| help |
| 0x40: A0 connected GND and A1 connected to GND. |
| 0x41: A0 connected VDD and A1 connected to GND. |
| 0x42: A0 connected GND and A1 connected to VDD. |
| 0x43: A0 connected VDD and A1 connected to VDD. |
| |
| config HDC1008_I2C_MASTER_DEV_NAME |
| string |
| prompt "I2C master where HDC1008 is connected" |
| depends on HDC1008 |
| default "I2C_0" |
| help |
| Specify the device name of the I2C master device to which the |
| HDC1008 chip is connected. |
| |
| config HDC1008_GPIO_DEV_NAME |
| string |
| prompt "GPIO device" |
| default "GPIO_0" |
| depends on HDC1008 |
| help |
| The device name of the GPIO device to which the HDC1008 data-ready |
| pin is connected. |
| |
| config HDC1008_GPIO_PIN_NUM |
| int |
| prompt "Interrupt GPIO pin number" |
| default 0 |
| depends on HDC1008 |
| help |
| The number of the GPIO on which the data-ready signal from the HDC1008 |
| chip will be received. |